Export limit exceeded: 26769 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26769 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-40299 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: gve: Implement gettimex64 with -EOPNOTSUPP gve implemented a ptp_clock for sole use of do_aux_work at this time. ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has implemented either gettimex64 or gettime64. Stub gettimex64 and return -EOPNOTSUPP to prevent NULL dereferencing.
CVE-2025-40321 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable]
CVE-2025-40339 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved.
CVE-2025-40351 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() The syzbot reported issue in hfsplus_delete_cat(): [ 70.682285][ T9333] ===================================================== [ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220 [ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220 [ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0 [ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310 [ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810 [ 70.685447][ T9333] do_rmdir+0x964/0xea0 [ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0 [ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0 [ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.687646][ T9333] [ 70.687856][ T9333] Uninit was stored to memory at: [ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600 [ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70 [ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0 [ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30 [ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0 [ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0 [ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.692773][ T9333] [ 70.692990][ T9333] Uninit was stored to memory at: [ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700 [ 70.694911][ T9333] mount_bdev+0x37b/0x530 [ 70.695320][ T9333] hfsplus_mount+0x4d/0x60 [ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.696588][ T9333] do_new_mount+0x73e/0x1630 [ 70.697013][ T9333] path_mount+0x6e3/0x1eb0 [ 70.697425][ T9333] __se_sys_mount+0x733/0x830 [ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.699730][ T9333] [ 70.699946][ T9333] Uninit was created at: [ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60 [ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0 [ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0 [ 70.701774][ T9333] allocate_slab+0x30e/0x1390 [ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0 [ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20 [ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0 [ 70.703598][ T9333] alloc_inode+0x82/0x490 [ 70.703984][ T9333] iget_locked+0x22e/0x1320 [ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0 [ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0 [ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700 [ 70.705776][ T9333] mount_bdev+0x37b/0x530 [ 70.706171][ T9333] hfsplus_mount+0x4d/0x60 [ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.707444][ T9333] do_new_mount+0x73e/0x1630 [ 70.707865][ T9333] path_mount+0x6e3/0x1eb0 [ 70.708270][ T9333] __se_sys_mount+0x733/0x830 [ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.710611][ T9333] [ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17 [ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.712490][ T9333] ===================================================== [ 70.713085][ T9333] Disabling lock debugging due to kernel taint [ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ... [ 70.714159][ T9333] ---truncated---
CVE-2025-40353 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Do not warn if the page is already tagged in copy_highpage() The arm64 copy_highpage() assumes that the destination page is newly allocated and not MTE-tagged (PG_mte_tagged unset) and warns accordingly. However, following commit 060913999d7a ("mm: migrate: support poisoned recover from migrate folio"), folio_mc_copy() is called before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the copy will be done again to the same destination page. Since copy_highpage() already set the PG_mte_tagged flag, this second copy will warn. Replace the WARN_ON_ONCE(page already tagged) in the arm64 copy_highpage() with a comment.
CVE-2025-40042 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix race condition in kprobe initialization causing NULL pointer dereference There is a critical race condition in kprobe initialization that can lead to NULL pointer dereference and kernel crash. [1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000 ... [1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO) [1135630.269239] pc : kprobe_perf_func+0x30/0x260 [1135630.277643] lr : kprobe_dispatcher+0x44/0x60 [1135630.286041] sp : ffffaeff4977fa40 [1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400 [1135630.302837] x27: 0000000000000000 x26: 0000000000000000 [1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528 [1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50 [1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50 [1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000 [1135630.349985] x17: 0000000000000000 x16: 0000000000000000 [1135630.359285] x15: 0000000000000000 x14: 0000000000000000 [1135630.368445] x13: 0000000000000000 x12: 0000000000000000 [1135630.377473] x11: 0000000000000000 x10: 0000000000000000 [1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000 [1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000 [1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000 [1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006 [1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000 [1135630.429410] Call trace: [1135630.434828] kprobe_perf_func+0x30/0x260 [1135630.441661] kprobe_dispatcher+0x44/0x60 [1135630.448396] aggr_pre_handler+0x70/0xc8 [1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0 [1135630.462435] brk_handler+0xbc/0xd8 [1135630.468437] do_debug_exception+0x84/0x138 [1135630.475074] el1_dbg+0x18/0x8c [1135630.480582] security_file_permission+0x0/0xd0 [1135630.487426] vfs_write+0x70/0x1c0 [1135630.493059] ksys_write+0x5c/0xc8 [1135630.498638] __arm64_sys_write+0x24/0x30 [1135630.504821] el0_svc_common+0x78/0x130 [1135630.510838] el0_svc_handler+0x38/0x78 [1135630.516834] el0_svc+0x8/0x1b0 kernel/trace/trace_kprobe.c: 1308 0xffff3df8995039ec <kprobe_perf_func+0x2c>: ldr x21, [x24,#120] include/linux/compiler.h: 294 0xffff3df8995039f0 <kprobe_perf_func+0x30>: ldr x1, [x21,x0] kernel/trace/trace_kprobe.c 1308: head = this_cpu_ptr(call->perf_events); 1309: if (hlist_empty(head)) 1310: return 0; crash> struct trace_event_call -o struct trace_event_call { ... [120] struct hlist_head *perf_events; //(call->perf_event) ... } crash> struct trace_event_call ffffaf015340e528 struct trace_event_call { ... perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0 ... } Race Condition Analysis: The race occurs between kprobe activation and perf_events initialization: CPU0 CPU1 ==== ==== perf_kprobe_init perf_trace_event_init tp_event->perf_events = list;(1) tp_event->class->reg (2)← KPROBE ACTIVE Debug exception triggers ... kprobe_dispatcher kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE) head = this_cpu_ptr(call->perf_events)(3) (perf_events is still NULL) Problem: 1. CPU0 executes (1) assigning tp_event->perf_events = list 2. CPU0 executes (2) enabling kprobe functionality via class->reg() 3. CPU1 triggers and reaches kprobe_dispatcher 4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed) 5. CPU1 calls kprobe_perf_func() and crashes at (3) because call->perf_events is still NULL CPU1 sees that kprobe functionality is enabled but does not see that perf_events has been assigned. Add pairing read an ---truncated---
CVE-2025-41739 2 Codesys, Linux 17 Control For Beaglebone Sl, Control For Empc-a/imx6 Sl, Control For Iot2000 Sl and 14 more 2026-04-15 5.9 Medium
An unauthenticated remote attacker, who beats a race condition, can exploit a flaw in the communication servers of the CODESYS Control runtime system on Linux and QNX to trigger an out-of-bounds read via crafted socket communication, potentially causing a denial of service.
CVE-2025-40017 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix memory leak by freeing untracked persist buffer One internal buffer which is allocated only once per session was not being freed during session close because it was not being tracked as part of internal buffer list which resulted in a memory leak. Add the necessary logic to explicitly free the untracked internal buffer during session close to ensure all allocated memory is released properly.
CVE-2025-40002 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix use-after-free in tb_dp_dprx_work The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(), which does not ensure that the delayed work item tunnel->dprx_work has fully completed if it was already running. This leads to use-after-free scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while tunnel->dprx_work remains active and attempts to dereference tb_tunnel in tb_dp_dprx_work(). A typical race condition is illustrated below: CPU 0 | CPU 1 tb_dp_tunnel_active() | tb_deactivate_and_free_tunnel()| tb_dp_dprx_start() tb_tunnel_deactivate() | queue_delayed_work() tb_dp_activate() | tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker cancel_delayed_work() | tb_tunnel_put(tunnel); | | tunnel = container_of(...); //UAF | tunnel-> //UAF Replacing cancel_delayed_work() with cancel_delayed_work_sync() is not feasible as it would introduce a deadlock: both tb_dp_dprx_work() and the cleanup path acquire tb->lock, and cancel_delayed_work_sync() would wait indefinitely for the work item that cannot proceed. Instead, implement proper reference counting: - If cancel_delayed_work() returns true (work is pending), we release the reference in the stop function. - If it returns false (work is executing or already completed), the reference is released in delayed work function itself. This ensures the tb_tunnel remains valid during work item execution while preventing memory leaks. This bug was found by static analysis.
CVE-2025-40001 1 Linux 1 Linux Kernel 2026-04-15 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis.
CVE-2025-40015 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: media: stm32-csi: Fix dereference before NULL check In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while assigning a value to the 'src_pad'. However the same value is being checked against NULL at a later point of time indicating that there are chances that the value can be NULL. Move the dereference after the NULL check.
CVE-2025-59691 2 Linux, Purevpn 2 Linux, Purevpn 2026-04-15 3.7 Low
PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0.
CVE-2025-59692 2 Linux, Purevpn 2 Linux, Purevpn 2026-04-15 3.7 Low
PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0.
CVE-2025-68176 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: PCI: cadence: Check for the existence of cdns_pcie::ops before using it cdns_pcie::ops might not be populated by all the Cadence glue drivers. This is going to be true for the upcoming Sophgo platform which doesn't set the ops. Hence, add a check to prevent NULL pointer dereference. [mani: reworded subject and description]
CVE-2025-68178 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix possible deadlock while configuring policy Following deadlock can be triggered easily by lockdep: WARNING: possible circular locking dependency detected 6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted ------------------------------------------------------ check/1334 is trying to acquire lock: ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180 but task is already holding lock: ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}: blk_queue_enter+0x40b/0x470 blkg_conf_prep+0x7b/0x3c0 tg_set_limit+0x10a/0x3e0 cgroup_file_write+0xc6/0x420 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&q->rq_qos_mutex){+.+.}-{4:4}: __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 wbt_init+0x17e/0x280 wbt_enable_default+0xe9/0x140 blk_register_queue+0x1da/0x2e0 __add_disk+0x38c/0x5d0 add_disk_fwnode+0x89/0x250 device_add_disk+0x18/0x30 virtblk_probe+0x13a3/0x1800 virtio_dev_probe+0x389/0x610 really_probe+0x136/0x620 __driver_probe_device+0xb3/0x230 driver_probe_device+0x2f/0xe0 __driver_attach+0x158/0x250 bus_for_each_dev+0xa9/0x130 driver_attach+0x26/0x40 bus_add_driver+0x178/0x3d0 driver_register+0x7d/0x1c0 __register_virtio_driver+0x2c/0x60 virtio_blk_init+0x6f/0xe0 do_one_initcall+0x94/0x540 kernel_init_freeable+0x56a/0x7b0 kernel_init+0x2b/0x270 ret_from_fork+0x268/0x4c0 ret_from_fork_asm+0x1a/0x30 -> #0 (&q->sysfs_lock){+.+.}-{4:4}: __lock_acquire+0x1835/0x2940 lock_acquire+0xf9/0x450 __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 blk_unregister_queue+0x53/0x180 __del_gendisk+0x226/0x690 del_gendisk+0xba/0x110 sd_remove+0x49/0xb0 [sd_mod] device_remove+0x87/0xb0 device_release_driver_internal+0x11e/0x230 device_release_driver+0x1a/0x30 bus_remove_device+0x14d/0x220 device_del+0x1e1/0x5a0 __scsi_remove_device+0x1ff/0x2f0 scsi_remove_device+0x37/0x60 sdev_store_delete+0x77/0x100 dev_attr_store+0x1f/0x40 sysfs_kf_write+0x65/0x90 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#3); lock(&q->rq_qos_mutex); lock(&q->q_usage_counter(queue)#3); lock(&q->sysfs_lock); Root cause is that queue_usage_counter is grabbed with rq_qos_mutex held in blkg_conf_prep(), while queue should be freezed before rq_qos_mutex from other context. The blk_queue_enter() from blkg_conf_prep() is used to protect against policy deactivation, which is already protected with blkcg_mutex, hence convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile, consider that blkcg_mutex is held after queue is freezed from policy deactivation, also convert blkg_alloc() to use GFP_NOIO.
CVE-2025-68204 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: scmi: Fix genpd leak on provider registration failure If of_genpd_add_provider_onecell() fails during probe, the previously created generic power domains are not removed, leading to a memory leak and potential kernel crash later in genpd_debug_add(). Add proper error handling to unwind the initialized domains before returning from probe to ensure all resources are correctly released on failure. Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20
CVE-2025-68205 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver After restructuring and splitting the HDMI codec driver code, each HDMI codec driver contains the own build_controls and build_pcms ops. A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both build_controls and build_pcms are swapped. Unfortunately both callbacks have the very same form, and the compiler didn't complain it, either. This resulted in a NULL dereference because the PCM instance hasn't been initialized at calling the build_controls callback. Fix it by passing the proper entries.
CVE-2025-68225 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: lib/test_kho: check if KHO is enabled We must check whether KHO is enabled prior to issuing KHO commands, otherwise KHO internal data structures are not initialized.
CVE-2025-68247 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: posix-timers: Plug potential memory leak in do_timer_create() When posix timer creation is set to allocate a given timer ID and the access to the user space value faults, the function terminates without freeing the already allocated posix timer structure. Move the allocation after the user space access to cure that. [ tglx: Massaged change log ]
CVE-2025-68249 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: most: usb: hdm_probe: Fix calling put_device() before device initialization The early error path in hdm_probe() can jump to err_free_mdev before &mdev->dev has been initialized with device_initialize(). Calling put_device(&mdev->dev) there triggers a device core WARN and ends up invoking kref_put(&kobj->kref, kobject_release) on an uninitialized kobject. In this path the private struct was only kmalloc'ed and the intended release is effectively kfree(mdev) anyway, so free it directly instead of calling put_device() on an uninitialized device. This removes the WARNING and fixes the pre-initialization error path.