Export limit exceeded: 427551 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 427551 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (427551 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-126722 1 Rooxis 1 Rooxis Rxr-12 2026-11-17 9.8 Critical
Rooxis RXR-12 Wi-Fi router contains an undocumented telnet backdoor daemon (/usr/bin/telnetd_startup) that, upon receipt of a precomputed AES-128-CBC magic packet using a firmware-wide static key and IV, enables telnet service with default credentials, providing remote root access. Firmware 20260813_c2169ea5 removes the UDP listener entirely, and users can update through their local web interface.
CVE-2026-110789 2026-11-17 7.5 High
libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 5.1.22, the @libp2p/crypto code reached by the default Identify service accepts a remote peer’s crafted publicKey before peer-id or signature verification and passes it through publicKeyFromProtobuf to the ASN.1 DER decoder. readLength in packages/crypto/src/keys/rsa/der.ts accepts long-form element lengths larger than the remaining buffer, causing readInteger and related readers to loop synchronously over an attacker-claimed length from a very small key blob. Because decoding occurs in one event-loop tick before the remotePeer equality check in packages/protocol-identify/src/identify.ts, the Identify timeout cannot interrupt it, allowing repeated unauthenticated connections to stall all timers and peers and transiently exhaust memory. This issue is fixed in version 5.1.22.
CVE-2026-77940 1 Autodesk 1 Autocad 2026-11-17 3.3 Low
A maliciously crafted DWG file containing an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user.
CVE-2026-77941 1 Autodesk 1 Autocad 2026-11-17 3.3 Low
A maliciously crafted DWG or DXF file containing an external reference with an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user.
CVE-2026-64555 1 Linux 1 Linux Kernel 2026-11-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM.
CVE-2026-77942 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted IES file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Write vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVE-2026-119793 2026-11-17 7.5 High
libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 17.0.0, the @libp2p/gossipsub default configuration allows a connected remote peer to submit unsigned subscription RPC metadata for arbitrarily many distinct topic strings. handleReceivedSubscription in packages/gossipsub/src/gossipsub.ts creates a persistent topics-map entry for each accepted topic, while allowedTopics is unset by default, decodeRpc maxSubscriptions limits only one RPC rather than aggregate topic bytes, and peer scoring has no subscription-volume penalty. A single peer can therefore grow the topics map and committed heap toward out-of-memory conditions, and disconnecting additionally causes removePeer to scan all accumulated topic entries. This issue is fixed in version 17.0.0.
CVE-2026-77943 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Write vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVE-2022-4994 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: wean fast IN from emulator_pio_in Use __emulator_pio_in() directly for fast PIO instead of bouncing through emulator_pio_in() now that __emulator_pio_in() fills "val" when handling in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a pure nop. emulator_pio_in_emulated is now the last caller of emulator_pio_in. No functional change intended.
CVE-2026-77944 1 Autodesk 1 Autocad 2026-11-17 3.3 Low
A maliciously crafted DXF file containing a scene-background object with an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user.
CVE-2026-104868 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted DWG file, when parsed by Autodesk AutoCAD, can trigger an Integer Overflow vulnerability in RLE bitmap decompression, resulting in an undersized heap allocation and subsequent heap buffer overflow. A malicious actor can leverage this vulnerability to cause a crash or potentially execute arbitrary code in the context of the current process.
CVE-2026-64565 1 Linux 1 Linux Kernel 2026-11-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well]
CVE-2026-130621 1 Aws 2 Amazon-efs-utils, Aws-efs-csi-driver 2026-11-17 8.2 High
A time-of-check time-of-use (TOCTOU) race condition in the local port selection in AWS efs-utils (amazon-efs-utils) before 3.3.5 might allow a user that can start EFS mounts on a shared host to read and write a different Amazon EFS or S3 Files file system that is mounted on that same host, under that mount's IAM identity and access point, via concurrent mount operations. Only file systems mounted on the same host at the same time can be affected. Every mount involved was configured by the owner of that host, using credentials and access points that owner controls, against file systems whose owners had already granted that host access, so the issue grants no access beyond what the host was already permitted and does not cross AWS account boundaries unless the host's owner configured a cross-account mount. The practical risk is lateral access between workloads on the same host at the same time, for example one container reading another container's file system under that container's identity. The issue does not expose the other mount's IAM credentials or TLS session keys. To remediate this issue, users should upgrade amazon-efs-utils to version 3.3.5 or later. Users of the Amazon EFS CSI Driver should upgrade to version 3.5.4 or later, and users of the Amazon EKS EFS CSI add-on should update to v3.5.4-eksbuild.1 or later.
CVE-2026-93299 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted DWG file, when parsed through Autodesk AutoCAD or processed by the installed DWG thumbnail handler, can force an Out-of-Bounds Write vulnerability resulting in heap corruption. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVE-2026-93298 1 Autodesk 1 Autocad 2026-11-17 5.5 Medium
A maliciously crafted DXF file containing crafted VBA project data, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to read sensitive data from process memory.
CVE-2026-93297 1 Autodesk 1 Autocad 2026-11-17 5.5 Medium
A maliciously crafted DWG or DXF file containing a crafted field format string, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to read sensitive data from process memory.
CVE-2026-85648 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted DDS file, when parsed through Autodesk AutoCAD, can force a Heap-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVE-2026-64566 1 Linux 1 Linux Kernel 2026-11-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags() When iptfs_skb_add_frags() copies frag references from the source frag walk into a new SKB, it increments the page reference count via __skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the destination SKB's skb_shinfo->flags. If the source SKB carries shared frags (e.g. from a page-pool backed receive path), the new inner SKB will appear to ESP as having privately owned frags. A subsequent esp_input() call for a nested transport-mode SA then takes the no-COW fast path and decrypts in place, writing over pages that are still referenced by the outer IPTFS SKB. This causes kernel-visible memory corruption and can trigger a panic. All other frag-transfer helpers in the kernel (skb_try_coalesce, skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this convention by setting the flag inside the loop immediately after __skb_frag_ref() and nr_frags++, so every exit path that attaches a frag unconditionally propagates SKBFL_SHARED_FRAG.
CVE-2026-85647 1 Autodesk 1 Autocad 2026-11-17 7.8 High
A maliciously crafted DWG file containing a malformed embedded image, when parsed through Autodesk AutoCAD, can force a Heap-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVE-2026-64568 1 Linux 1 Linux Kernel 2026-11-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points at the object already queued for freeing. A later update or AP teardown re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().