Export limit exceeded: 430109 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430109 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430109 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430109 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430109 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99668 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99768 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window. | ||||
| CVE-2026-99770 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone. | ||||
| CVE-2026-99771 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL. | ||||
| CVE-2026-99774 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there. | ||||
| CVE-2026-99777 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL. | ||||
| CVE-2026-131024 | 2 Apple, Google | 2 Iphone Os, Chrome | 2026-11-20 | 8.1 High |
| Incorrect authorization in iOSWeb in Google Chrome on on iOS prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-14915 | 2026-11-20 | 5.3 Medium | ||
| Exposure of sensitive system information to an unauthorized control sphere vulnerability in Tegsoft Yönetim ve Bilişim Hizmetleri Tic. Ltd. Şti. Tegsoft İletişim Merkezi allows Query System for Information. This issue affects Tegsoft İletişim Merkezi: before latest-202611161510. | ||||
| CVE-2026-133610 | 1 Antirez | 1 Gguf-tools | 2026-11-20 | 6.3 Medium |
| A vulnerability was found in antirez gguf-tools up to fdfafbed766db0a1e9019b07994cd88f133d1aab. The impacted element is the function gguf_get_tensor of the file gguflib.c of the component GGUF Parser. The manipulation of the argument offset/alignment results in out-of-bounds read. The attack can be launched remotely. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-129074 | 2026-11-20 | 7.1 High | ||
| Missing Authorization vulnerability in miniOrange miniOrange's Google Authenticator miniorange-2-factor-authentication allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects miniOrange's Google Authenticator: from n/a through 6.6.0. | ||||
| CVE-2026-129043 | 2026-11-20 | 9.3 Critical | ||
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Tribulant Software Newsletters newsletters-lite allows SQL Injection.This issue affects Newsletters: from n/a through 4.18.2. | ||||
| CVE-2026-132937 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.5 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4 arbitrary file write via read-write file channels in the Kotlin DSL sandbox was possible | ||||
| CVE-2026-132938 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 5.9 Medium |
| In JetBrains TeamCity before 2026.2 improper authorization allowed project-limited access tokens to act with full permissions via XML-RPC | ||||
| CVE-2026-132939 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.8 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Maven settings health report was possible | ||||
| CVE-2026-132940 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.4 Medium |
| In JetBrains TeamCity before 2026.2 credential leakage via Mercurial subrepository URLs was possible | ||||
| CVE-2026-132941 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 4.3 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4 missing authorization allowed users to remove all build configuration assignments from an agent | ||||
| CVE-2026-132942 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 5.3 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4 unauthenticated extraction of build parameter values via a timing attack on build status icons was possible | ||||
| CVE-2026-132943 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.1 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 reflected XSS on the Build Log page was possible | ||||
| CVE-2026-132945 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.1 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 reflected XSS in the inspection profile selector popup was possible | ||||
| CVE-2026-132946 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 6.1 Medium |
| In JetBrains TeamCity before 2026.2, 2026.1.5 reflected XSS on the Test History page was possible | ||||