Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429899 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99754 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way. | ||||
| CVE-2026-99753 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution. | ||||
| CVE-2026-99752 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Handle buffer mapping failures when clearing a BO lsdc_bo_clear() ignores the return value from lsdc_bo_kmap() and writes to lbo->kptr unconditionally. When the first mapping of a newly allocated buffer fails, kptr is still NULL and the subsequent memset accesses it. Return the mapping error without touching the buffer and propagate it from lsdc_gem_object_create(). Install the GEM object functions before clearing so that drm_gem_object_put() can release the buffer correctly on failure. Do not add the failed object to the tracking list or return an uncleared buffer to the caller. Imported buffers still skip clearing, and successfully mapped buffers are cleared and unmapped as before. Tested on LS7A2000 with a one-shot range error in ttm_bo_kmap(). Its -EINVAL return reached userspace, the object was destroyed once, and no GEM handle was published. Normal create/map/zero/write/read/close cycles passed, with the tracked BO count and VRAM usage unchanged. AI assistance was used for the lifetime analysis, fix, fault-injection tools, build and test execution. | ||||
| CVE-2026-99751 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail. | ||||
| CVE-2026-99745 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ] | ||||
| CVE-2026-99742 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: charge shared policy nodes Any local user can bypass memory.max with mbind() on a tmpfs file, and allocate unbounded kernel memory. mbind() sets a NUMA memory policy for a range of a mapping. If the mapping is of a shmem and friends, the kernel also stores the policy on the inode, in a tree with one entry per range of the file. Each mbind() on a single page of a mapping can add one shared policy node (struct sp_node) and one struct mempolicy to that tree. They outlive the mapping and stay around until the inode is destroyed. The tree is not bounded by the file size, so the file can be empty. Memory that user space can allocate must be charged to a memory cgroup. A slab cache does that for all of its objects if it is created with SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both structs without SLAB_ACCOUNT, so they are not charged to any cgroup. Reproduced with mbind() on single pages of an empty tmpfs file, from a cgroup with memory.max=8M: the global OOM killer killed tasks owned by root, and the machine panicked. Fix this by creating both caches with SLAB_ACCOUNT. This change implies that mbind() can now fail when running into memcg limits. Further, the policy_cache also serves task and VMA policies, so they are similarly accounted now. Note that per-file limits are not really helpful, as the user could simply use many files; having limits per user is tricky as well. Fix generated by an LLM and submitted by Chris Mason in private. [ david: smaller description tweaks ] | ||||
| CVE-2026-99741 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tmpfs: keep the quota soft limits of an unused id When the last reference to a dquot goes away, shmem_release_dquot() stores its limits in the rb tree of the mount, unless shmem_is_empty_dquot() says that there is nothing worth storing. That function looks at the usage and at the two hard limits only. So if the administrator sets nothing but soft limits for an id that owns no file yet, the entry is thrown away as soon as the dquot that Q_SETQUOTA used is released, and the id never gets to see a limit. To fix it, compare the soft limits as well: an entry can be empty only if both soft limits are zero as well, which is exactly what shmem_acquire_dquot() sets for a new entry. Fix generated by an LLM and sent by Josef Bacik in private. [ david: slightly adjusted description ] | ||||
| CVE-2026-99733 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look again if a folio left the mapping invalidate_inode_pages2_range() skips a folio which no longer belongs to the mapping by the time it has got the folio lock, on the assumption that somebody else has removed it from the page cache. But the folio may have been replaced, and then there is a new folio with the same data at that index. For most cases, like folio migration, that is impossible. However, collapse_file() only checks the refcount of the old folios, under the i_pages lock, and relies on their folio locks from there on. That works for users which repeat the lookup when they find folio->mapping changed. The following scenario is, however, possible: CPU0 pwrite(O_DIRECT) CPU1 collapse_file() kiocb_invalidate_pages() read the folio (old data), lock it refcount check the write completes copy to new_folio kiocb_invalidate_post_direct_write() find_get_entries() -> old folio xas_store(new_folio) folio->mapping = NULL folio_unlock(folio) folio_lock() folio->mapping != mapping -> continue In that scenario, the collapsed folio with the data from before the write stays in the page cache after the write has returned. This used to be impossible, as khugepaged only collapsed files that nobody had open for writing. Restart the lookup at that index, like shmem_undo_range() does. The same problem seems to exist in truncate_inode_pages_range() as well when truncate_inode_folio() fails, so handle it there as well, but slightly differently: simply check once more through find_get_entries(). | ||||
| CVE-2026-99728 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio() Since the deferred split queue became a list_lru, the isolate callback moves the folios it took a reference on to an on-stack list, linked through folio->_deferred_list, and deferred_split_scan() takes them off that list with list_del_init() without holding the list_lru lock. deferred_split_folio() does not know about the on-stack list. It only holds the list_lru lock when it looks at the same list_head, and it can run for such a folio: a THP is queued when it is mapped, as a candidate for the underused check, and is queued "again" when a part of it gets unmapped: CPU0 deferred_split_scan() CPU1 deferred_split_folio() list_del_init(&folio->_deferred_list) next->prev = prev prev->next = next entry->next = entry list_lru_lock_irqsave() folio_set_partially_mapped() __list_lru_add() list_empty(item) -> true list_add_tail(item, &l->list) item->next = &l->list item->prev = tail entry->prev = entry The folio now sits on the list_lru with ->prev pointing to itself. The next removal leaves the neighbours pointing to it, and they still do so after the folio has been freed. With CONFIG_DEBUG_LIST: list_del corruption. prev->next should be ffd4000000270090, but was ffd4000000278090. (prev=ffd4000000270090) Fix it by grabbing the lock around list_del_init() so deferred_split_folio() cannot race with it. | ||||
| CVE-2026-99723 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix pinned page leak in vhost_vdpa_pa_map() error path When pin_user_pages() or vhost_vdpa_map() fails, vhost_vdpa_pa_map() is supposed to unpin the pages pinned after the last successfully mapped chunk, i.e. the range [map_pfn, last_pfn]. The unpin is guarded by nchunks, but nchunks is reset to 0 every time a chunk is mapped from inside the current page list, so a failure after any such boundary leaves that pending range pinned forever. With physically scattered memory nearly every page list contains a boundary, so the leak happens on practically every failed IOTLB update. The pending range is non-empty exactly when a page has been pinned, which last_pfn already tells us, so drop nchunks and test last_pfn. | ||||
| CVE-2026-99722 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vringh: bound top-level re-entry into indirect tables In __vringh_iov(), the F_INDIRECT branch descends into the indirect table and continues before the descriptor accounting runs. A top-level indirect descriptor is therefore never charged to count. If such a descriptor sets NEXT to point back at itself, returning from the indirect table resumes at the same top-level descriptor, which is again not counted, so the walk never makes forward progress. Because count stays flat and indirect_count is reset to 0 on every return to the top-level table, neither bound in the loop check trips. A guest can spin the vringh worker at 100% CPU inside __vringh_iov(), an uninterruptible host DoS. Move the descriptor accounting above the indirect switch so that a top-level indirect descriptor is charged one top-level traversal step before the walk descends into its table, bringing this re-entry under the existing vrh->vring.num bound. Each top-level descriptor is still charged at most one step and indirect_count still bounds a single table, so legitimate chains (including the multiple-indirect case in tools/virtio/vringh_test.c) stay within vring.num, while a cyclic indirect descriptor is now rejected with -ELOOP. | ||||
| CVE-2026-99703 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix mremap deadlock when PMD sharing is possible move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for write while moving hugetlb PTEs. This prevents races with truncation and protects huge_pmd_unshare(), but the move loop must not call helpers that can acquire the same rwsem for read. huge_pte_alloc() can do that when the destination can use PMD sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for read while searching for a shareable PMD table. Calling it while the move path already holds i_mmap_rwsem for write can deadlock. Avoid that path for PMD-sized hugetlb mappings that can use PMD sharing. Instead of allocating or sharing the destination page table while moving, zap the source range and let the destination fault path populate or share the PMD lazily. Reuse the hugetlb unmap logic for the source-side zap by splitting the core loop out of __unmap_hugepage_range(). The wrapper keeps the existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush() behavior, while move_hugetlb_page_tables() can reuse the unmap loop with its existing mmu_gather. | ||||
| CVE-2026-99694 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target. | ||||
| CVE-2026-99681 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return. | ||||
| CVE-2026-99662 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99661 | 1 Linux | 1 Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early. | ||||
| CVE-2026-130793 | 1 Gpac | 1 Gpac | 2026-11-20 | 6.6 Medium |
| GPAC before 26.07.0 contains a stack-based buffer overflow vulnerability in gf_filter_pid_resolve_file_template_ex() in src/filter_core/filter_pid.c that allows local attackers to write past fixed GF_MAX_PATH stack buffers. Attackers can convince a user to segment a crafted NHML input referencing an overly long media file name with MP4Box -dash to crash the process. | ||||
| CVE-2026-130635 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.07.0 contains an uncontrolled recursion vulnerability in dasher_gather_deps() in src/filters/dasher.c that fails to detect cyclic stream dependency chains. Attackers can supply a crafted MPEG-2 TS file that MP4Box processes with -dash, exhausting the stack and crashing the process for denial of service. | ||||
| CVE-2026-130634 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.07.0 contains a heap-based buffer overflow in gf_mpd_resolve_url() in src/media_tools/mpd.c that allows attackers to write past a heap buffer via crafted DASH manifests. Attackers can supply a crafted MPD whose segment template expands beyond the allocation through unchecked strcat() calls, crashing MP4Box and causing denial of service. | ||||
| CVE-2026-130632 | 1 Gpac | 1 Gpac | 2026-11-20 | 5.5 Medium |
| GPAC before 26.02.0 contains an out-of-bounds read vulnerability in m2tsdmx_send_packet() in src/filters/dmx_m2ts.c caused by double-skipping the VC-1 start-code offset. Attackers can supply a crafted MPEG-2 TS VC-1 stream that underflows the remaining length, causing memcpy() to over-read and crash MP4Box on import. | ||||