Export limit exceeded: 426438 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (426438 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-124004 | 1 Copeland | 1 Xweb Evo | 2026-11-16 | 9.8 Critical |
| XWEB EVO before 5.6.2 contains a hardcoded backdoor password vulnerability that allows unauthenticated remote attackers to gain full administrative access to the built-in Administrator account. Attackers can authenticate using the hardcoded credential xwebevonewgeneration in a single request to obtain a complete admin session and full control over the application. This product line reached it's end of service date in March 2026. | ||||
| CVE-2026-120980 | 1 Arista | 1 Eos | 2026-11-16 | 5.3 Medium |
| On affected platforms running Arista EOS with VPLS-BGP enabled, an attacker who has established a BGP session with the PE routers can send a specially crafted BGP packet to cause the BGP agent to restart unexpectedly. | ||||
| CVE-2026-120979 | 1 Arista | 1 Eos | 2026-11-16 | 8.1 High |
| This vulnerability affects customers using Arista Pathfinder for WAN path selection with Border Gateway Protocol-Link State (BGP-LS) configured for Dynamic Path Selection (DPS). On affected platforms running Arista EOS with BGP-LS configured for DPS, an attacker who has established an authenticated BGP-LS session with the device can send a specially crafted BGP packet to cause incorrect WAN path selection and disrupt traffic forwarding. | ||||
| CVE-2026-120978 | 1 Arista | 1 Eos | 2026-11-16 | 6.5 Medium |
| On affected Arista EOS platforms running Border Gateway Protocol with Link State ( BGP-LS) and configured with the Dynamic Path Selection (DPS) consumer role, an attacker who has established an authenticated BGP-LS session with the device can send a crafted message to cause the BGP agent to restart unexpectedly. An Arista Pathfinder deployment is not required. | ||||
| CVE-2026-120976 | 1 Arista | 1 Eos | 2026-11-16 | 6 Medium |
| On affected platforms running Arista EOS with IEEE 802.1X authentication and MACsec using dynamically derived keys, sensitive authentication information may be recorded in diagnostic data during a Smart Switch Upgrade (SSU). An attacker with administrative access on the device who obtains the affected diagnostic data could recover sensitive authentication information. This could potentially compromise the confidentiality and integrity of traffic protected by MACsec on the affected link. The vulnerability is only exposed during and after an SSU reload where an active 802.1X session used for MACsec is present. | ||||
| CVE-2026-120975 | 1 Arista | 1 Eos | 2026-11-16 | 3.1 Low |
| On affected platforms running Arista EOS with automatic certificate management configured and automatic Certificate Authority (CA) certificate retrieval enabled, a malicious packet may cause the AutoCertMgmt process to be terminated unexpectedly. Managed X.509 certificates will not be renewed automatically and may eventually expire, potentially disrupting TLS-dependent services. | ||||
| CVE-2026-120974 | 1 Arista | 1 Eos | 2026-11-16 | 5.3 Medium |
| On affected platforms running Arista EOS with IPsec AutoVPN Feature configured with dynamic paths, the configured IPsec replay window may not be applied as expected. As a result, IPsec anti-replay protection may be silently inactive even when it has been configured via an SA policy, contrary to the operator's expectation. This issue does not allow decryption of the affected IPsec traffic, but it may allow replay of previously valid protected traffic. | ||||
| CVE-2026-116081 | 1 Fenrir | 2 Sleipnir Mobile For Iphone Ipad, Sleipnir Mobile For Iphone Ipad Black Edition | 2026-11-16 | 4.2 Medium |
| Sleipnir Mobile for iPhone / iPad and Sleipnir Mobile for iPhone / iPad Black Edition provided by Fenrir Inc. are vulnerable to improper certificate verification. A man-in-the-middle attack may allow an attacker to eavesdrop on an encrypted communication. | ||||
| CVE-2026-115690 | 1 Apache | 1 Wss4j | 2026-11-16 | N/A |
| Apache WSS4J remembers the UsernameToken Nonce, the Timestamp and signature of a signed message, and the ID of a SAML 2.0 "OneTimeUse" assertion, so that a captured message cannot be accepted twice. It checked whether a value had already been seen, validated the message, and only then remembered the value, as two separate steps. If several copies of the same message were processed at the same time, they could all pass the check before any of them was remembered, and all be accepted. An attacker who obtained a valid message before the recipient first processed it could send several copies at once, so that the same authenticated request was executed more than once. Where a UsernameToken is not bound to the message by a signature, the copies could carry different message bodies. The attacker needs to obtain the message while it is still in transit; a message captured after it has been accepted cannot be replayed. Affects deployments with a replay cache configured, as Apache CXF has by default. The value is now checked and remembered in a single atomic step. Custom ReplayCache implementations should override the new ReplayCache.addIfAbsent method with an operation that is atomic in their underlying store. Users are recommended to upgrade to versions 4.0.3 or 3.0.7 or 2.4.5, which fix this issue. | ||||
| CVE-2026-115539 | 2 Docker, Moby | 3 Docker Engine, Moby, Swarmkit | 2026-11-16 | N/A |
| SwarmKit's Cluster-API proxy can overwrite a forwarded client's TLS identity with an intermediary manager's identity. WithMetadataForwardTLSInfo replaces outgoing metadata with a copy of the incoming metadata, discarding the redirect guard's changes when built with grpc-go 1.39 or later. During a short window after a leader change, two proxy hops through managers with inconsistent views of the leader can allow an attacker possessing a valid worker node TLS certificate and private key to obtain a manager node certificate for the attacker's own key, escalating privileges from worker to manager. Applications built with an affected SwarmKit version and grpc-go 1.39 or later are impacted. | ||||
| CVE-2026-115538 | 2 Docker, Moby | 2 Docker Engine, Moby | 2026-11-16 | N/A |
| Moby's overlay network driver does not restore the iptables rules for encrypted overlay networks after firewalld deletes them. Unlike other Docker Engine networking components, the overlay driver does not handle firewalld reload or start signals over D-Bus. The missing rules cause outgoing VXLAN datagrams to bypass IPsec encryption and remove the protection against incoming cleartext VXLAN traffic. The condition is not logged by dockerd and persists until the encrypted network's last local endpoint is removed and another is added, or dockerd is restarted. Each further firewalld event repeats the condition. | ||||
| CVE-2026-111456 | 2 Red Hat, Redhat | 5 Red Hat Satellite 6, Satellite, Satellite Capsule and 2 more | 2026-11-16 | 7.1 High |
| A missing authorization check has been found in ConsumerResource.setupOwner() function of consumer registration module in the Candlepin package. The registration method checks permission to create a consumer only when the caller is a user. A consumer that authenticates with its identity certificate does not go through that check. A low-privileged network attacker or user who has a valid consumer certificate for one organization can register a new consumer in a different organization by supplying that organization's key. The response includes an identity certificate for the new consumer. With that certificate, the attacker can view the target organization's subscription pools. When the organization is not using simple content access, the attacker can attach that organization's entitlements to the new consumer. | ||||
| CVE-2026-111436 | 1 Openeuler | 1 Isula | 2026-11-16 | 4.4 Medium |
| Missing release of memory after effective lifetime vulnerability in openEuler iSulad on Linux. This vulnerability is associated with program file src/daemon/modules/spec/specs_mount.c. This issue affects iSulad: through 2.1.6. The memory leak vulnerability causes the iSulad daemon to be triggered frequently, exhausting the host machine's memory and ultimately leading to an OOM crash of the daemon, resulting in a denial of service (DoS). | ||||
| CVE-2026-111435 | 1 Openeuler | 1 Isula | 2026-11-16 | 7.4 High |
| Relative path traversal vulnerability in openEuler iSulad on Linux. This vulnerability is associated with program file src/daemon/modules/image/oci/oci_load.c. This issue affects iSulad: through 2.1.6. In oci_load.c, oci_load_process_manifest() does not sanitize the Config path of manifest.json. A malicious tar package can enable the isulad with the root permission to read any file on the host. | ||||
| CVE-2026-111434 | 1 Openeuler | 1 Isula | 2026-11-16 | 5.6 Medium |
| Use of Externally-Controlled format string vulnerability in openEuler iSulad on Linux. This vulnerability is associated with program file src/daemon/modules/image/oci/oci_load.c. This issue affects iSulad: through 2.1.6. When the iSulad daemon performs container lifecycle operations (such as create, start, exec, stop, etc.) through the isula runtime (shim), the daemon reads the stderr output of the shim process via a pipe for error information display. If the buffer contains format specifiers such as %s, %x, or %n, it may trigger a format string vulnerability, potentially leading to information leakage, denial of service, or the risk of arbitrary writes. | ||||
| CVE-2026-111433 | 1 Openeuler | 1 Isula | 2026-11-16 | 8.6 High |
| UNIX symbolic link (symlink) following vulnerability in openEuler iSulad on Linux. This vulnerability is associated with program file src/daemon/modules/spec/specs_mount.c. This issue affects iSulad: through 2.1.6. If an attacker can get the victim or the platform to run their crafted malicious image, they can cause the iSulad daemon to copy sensitive host directories into an anonymous volume when creating a container, which the container can then read. | ||||
| CVE-2026-110278 | 1 Ibm | 2 Contextforge, Contextforge Mcp Gateway | 2026-11-16 | 7.4 High |
| IBM ContextForge MCP Gateway 1.0.0 through 1.1.0 could allow an attacker to replay identity propagation claims signatures or expose sensitive user identity information to third-party MCP servers due to static signature payloads and missing per-gateway configuration checks during tool invocation. | ||||
| CVE-2026-110178 | 1 Ibm | 2 Contextforge, Contextforge Mcp Gateway | 2026-11-16 | 4.1 Medium |
| IBM ContextForge MCP Gateway 1.0.0 through 1.0.11 is vulnerable to improper access control in the bulk import path. A remote authenticated attacker holding a team-scoped `admin.import` permission can overwrite the endpoint URL, request headers, and authentication credentials of public tools, resources, and prompts owned by other tenants by sending a crafted POST request to `/v1/import` with `conflict_strategy=update`, redirecting subsequent AI gateway invocations to an attacker-controlled host. | ||||
| CVE-2026-102166 | 1 Arista | 1 Wi-fi Access Points | 2026-11-16 | 8.8 High |
| Arista C-260 and C-250 access points ship with fleet-wide static cryptographic keys used for firmware image verification and SSLP authentication. An attacker who is able to access these keys would be able to create modified firmware that will pass verification checks. This vulnerability is specific to the C-260 and C-250 models; other access point models enforce digitally signed upgrade images with secure boot and are not affected by this issue. | ||||
| CVE-2025-71470 | 1 Bellard | 1 Mquickjs | 2026-11-16 | 5.5 Medium |
| MicroQuickJS (mquickjs) before commit 99eed3f contains an out-of-bounds read vulnerability because JS_Call() raises exceptions during frame setup without updating ctx->sp and ctx->fp. Attackers can supply JavaScript that calls a non-function value, causing build_backtrace() to walk stale frame pointers and crash the engine for denial of service. | ||||