Export limit exceeded: 36467 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36467 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38336 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330 The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on WinXP, although it requires more attempts to cause it. The hang in that case is also resolved by forcing PIO. It doesn't appear that VIA has produced any drivers for that OS, thus no known workaround exists. HDDs attached to the controller do not suffer from any DMA issues. | ||||
| CVE-2025-38324 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu(). As syzbot reported [0], mpls_route_input_rcu() can be called from mpls_getroute(), where is under RTNL. net->mpls.platform_label is only updated under RTNL. Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to silence the splat. [0]: WARNING: suspicious RCU usage 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted ---------------------------- net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.2.4451/17730: #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline] #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961 stack backtrace: CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865 mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84 mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381 rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964 netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmmsg+0x200/0x420 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0a2818e969 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969 RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268 </TASK> | ||||
| CVE-2025-38318 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: arm-ni: Fix missing platform_set_drvdata() Add missing platform_set_drvdata in arm_ni_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. | ||||
| CVE-2025-38310 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: seg6: Fix validation of nexthop addresses The kernel currently validates that the length of the provided nexthop address does not exceed the specified length. This can lead to the kernel reading uninitialized memory if user space provided a shorter length than the specified one. Fix by validating that the provided length exactly matches the specified one. | ||||
| CVE-2025-38305 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use() There is no disagreement that we should check both ptp->is_virtual_clock and ptp->n_vclocks to check if the ptp virtual clock is in use. However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in ptp_vclock_in_use(), we observe a recursive lock in the call trace starting from n_vclocks_store(). ============================================ WARNING: possible recursive locking detected 6.15.0-rc6 #1 Not tainted -------------------------------------------- syz.0.1540/13807 is trying to acquire lock: ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline] ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415 but task is already holding lock: ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ptp->n_vclocks_mux); lock(&ptp->n_vclocks_mux); *** DEADLOCK *** .... ============================================ The best way to solve this is to remove the logic that checks ptp->n_vclocks in ptp_vclock_in_use(). The reason why this is appropriate is that any path that uses ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater than 0 before unregistering vclocks, and all functions are already written this way. And in the function that uses ptp->n_vclocks, we already get ptp->n_vclocks_mux before unregistering vclocks. Therefore, we need to remove the redundant check for ptp->n_vclocks in ptp_vclock_in_use() to prevent recursive locking. | ||||
| CVE-2025-38282 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.) | ||||
| CVE-2025-38280 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). | ||||
| CVE-2025-38279 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Do not include stack ptr register in precision backtracking bookkeeping Yi Lai reported an issue ([1]) where the following warning appears in kernel dmesg: [ 60.643604] verifier backtracking bug [ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10 [ 60.648428] Modules linked in: bpf_testmod(OE) [ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full) [ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10 [ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04 01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ... [ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246 [ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000 [ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff [ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a [ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8 [ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001 [ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000 [ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0 [ 60.691623] Call Trace: [ 60.692821] <TASK> [ 60.693960] ? __pfx_verbose+0x10/0x10 [ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10 [ 60.697495] check_cond_jmp_op+0x16f7/0x39b0 [ 60.699237] do_check+0x58fa/0xab10 ... Further analysis shows the warning is at line 4302 as below: 4294 /* static subprog call instruction, which 4295 * means that we are exiting current subprog, 4296 * so only r1-r5 could be still requested as 4297 * precise, r0 and r6-r10 or any stack slot in 4298 * the current frame should be zero by now 4299 */ 4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) { 4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt)); 4302 WARN_ONCE(1, "verifier backtracking bug"); 4303 return -EFAULT; 4304 } With the below test (also in the next patch): __used __naked static void __bpf_jmp_r10(void) { asm volatile ( "r2 = 2314885393468386424 ll;" "goto +0;" "if r2 <= r10 goto +3;" "if r1 >= -1835016 goto +0;" "if r2 <= 8 goto +0;" "if r3 <= 0 goto +0;" "exit;" ::: __clobber_all); } SEC("?raw_tp") __naked void bpf_jmp_r10(void) { asm volatile ( "r3 = 0 ll;" "call __bpf_jmp_r10;" "r0 = 0;" "exit;" ::: __clobber_all); } The following is the verifier failure log: 0: (18) r3 = 0x0 ; R3_w=0 2: (85) call pc+2 caller: R10=fp0 callee: frame1: R1=ctx() R3_w=0 R10=fp0 5: frame1: R1=ctx() R3_w=0 R10=fp0 ; asm volatile (" \ @ verifier_precision.c:184 5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78 7: (05) goto pc+0 8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0 9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx() 10: (b5) if r2 <= 0x8 goto pc+0 mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1 mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0 mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3 mark_preci ---truncated--- | ||||
| CVE-2025-38245 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). syzbot reported a warning below during atm_dev_register(). [0] Before creating a new device and procfs/sysfs for it, atm_dev_register() looks up a duplicated device by __atm_dev_lookup(). These operations are done under atm_dev_mutex. However, when removing a device in atm_dev_deregister(), it releases the mutex just after removing the device from the list that __atm_dev_lookup() iterates over. So, there will be a small race window where the device does not exist on the device list but procfs/sysfs are still not removed, triggering the splat. Let's hold the mutex until procfs/sysfs are removed in atm_dev_deregister(). [0]: proc_dir_entry 'atm/atmtcp:0' already registered WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377 Modules linked in: CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377 Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48 RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248 RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001 RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140 R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444 FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_create_data+0xbe/0x110 fs/proc/generic.c:585 atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361 atm_dev_register+0x46d/0x890 net/atm/resources.c:113 atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369 atmtcp_attach drivers/atm/atmtcp.c:403 [inline] atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x115/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f38b3b74459 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459 RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005 RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b </TASK> | ||||
| CVE-2025-38202 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf program. When BPF JIT is disabled or under 32-bit host, bpf_map_lookup_percpu_elem() will not be inlined. Using it in a sleepable bpf program will trigger the warning in bpf_map_lookup_percpu_elem(), because the bpf program only holds rcu_read_lock_trace lock. Therefore, add the missed check. | ||||
| CVE-2025-38201 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. Similar to: b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX") | ||||
| CVE-2025-38190 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atm: Revert atm_account_tx() if copy_from_iter_full() fails. In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ | ||||
| CVE-2025-38170 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: Discard stale CPU state when handling SME traps The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state incorrectly, and a race with preemption can result in a task having TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SME traps enabled). This can result in warnings from do_sme_acc() where SME traps are not expected while TIF_SME is set: | /* With TIF_SME userspace shouldn't generate any traps */ | if (test_and_set_thread_flag(TIF_SME)) | WARN_ON(1); This is very similar to the SVE issue we fixed in commit: 751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps") The race can occur when the SME trap handler is preempted before and after manipulating the saved FPSIMD/SVE/SME state, starting and ending on the same CPU, e.g. | void do_sme_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SME clear, SME traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | /* With TIF_SME userspace shouldn't generate any traps */ | if (test_and_set_thread_flag(TIF_SME)) | WARN_ON(1); | | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | unsigned long vq_minus_one = | sve_vq_from_vl(task_get_sme_vl(current)) - 1; | sme_set_vq(vq_minus_one); | | fpsimd_bind_task_to_cpu(); | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SME traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. Note: this was originallly posted as [1]. [ Rutland: rewrite commit message ] | ||||
| CVE-2025-38140 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target. | ||||
| CVE-2025-38128 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data (i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes). Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()' to do 'skb_put_data()' from an area beyond the one actually passed to 'mgmt_hci_cmd_sync()'. | ||||
| CVE-2025-38125 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring EST If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code. | ||||
| CVE-2025-38105 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too. | ||||
| CVE-2025-38099 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken A SCO connection without the proper voice_setting can cause the controller to lock up. | ||||
| CVE-2025-38096 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: don't warn when if there is a FW error iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently. | ||||
| CVE-2025-38071 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Check return value from memblock_phys_alloc_range() At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of contiguous free memory available at this point, the kernel will crash and burn because memblock_phys_alloc_range() returns 0 on failure, which leads memblock_phys_free() to throw the first 4 MiB of physical memory to the wolves. At a minimum it should fail gracefully with a meaningful diagnostic, but in fact everything seems to work fine without the weird reserve allocation. | ||||