| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: QUIC, when performing automated peer detection, may allow
uninitialized stack data to leak into the received address which is then used
as the destination for outgoing packets.
Impact summary: Applications using QUIC's automated peer detection mechanism
may receive an invalid address, leading to connection loss and disclosure of
uninitialized stack data to an attacker observing the outgoing network traffic.
CWE: CWE-457 (Use of Uninitialized Variable)
Description: The OpenSSL QUIC stack contains a feature in which, when using an
already connected socket, it will auto-detect the peer address during the SSL
handshake. This feature uses the getpeername() function, passing a buffer of
sufficient length to hold any supported address family, but passes a buffer
length that is only sized such that larger addresses, such as IPv6, cannot be
retrieved. The getpeername() function however, still returns the full address
length, which is accepted as the valid input buffer length, leading to the
address buffer containing uninitialized stack data instead of the actual peer
address. The invalid peer address is then used as destination for the outgoing
packets which leads to a connectivity breakage and a leakage of the
uninitialized stack data to passive network observers.
FIPS impact: no
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE as
the affected protocol is not implemented in the FIPS module. |
| Issue summary: The AES-GCM-SIV implementation treats a zero-length Additional
Authenticated Data (AAD) update as a reset of all the AAD supplied so far,
instead of leaving the AAD unchanged. An application that supplies its AAD in
several fragments, one of which is empty, therefore produces or verifies
messages whose authentication tag does not cover the AAD supplied before
the empty fragment.
Impact summary: Data an application intended to authenticate alongside a
message is silently left unauthenticated. An attacker can forge the AAD of such
a message.
CWE: CWE-325: Missing Cryptographic Step
Description: An application passing AAD in multiple chunks of which some have
zero length will have the previous AAD chunks effectively unauthenticated. Also,
on context re-initialisation, the AAD was not reset, which meant that any AAD
accumulated from the previous context usage were also included in the AAD of the
new message.
The fix makes a zero-length AAD update a no-op and clears any accumulated AAD
whenever the context is re-initialised with a key or a nonce.
A re-initialisation that only changes parameters keeps the AAD.
FIPS impact: no
The FIPS modules are not affected, as AES-GCM-SIV is not a FIPS approved
algorithm and is implemented only in the default provider, outside the
OpenSSL FIPS module boundary. |
| Issue summary: A retransmitted QUIC CRYPTO frame can release packet storage
while the TLS record layer retains a direct pointer into that storage causing
use after free.
Impact summary: A malicious QUIC server can cause a heap-use-after-free read
in the OpenSSL QUIC client. The server can also identify one allocator-adjacent
byte through the client's protected Handshake response.
CWE: CWE-416: Use After Free
Description: During CRYPTO stream processing, a pointer into the first frame's
memory on the stream is lent to the TLS handshake processing. The memory
must remain stable until it is processed and released. However the processing
of retransmitted CRYPTO frames could release the memory if the retransmitted
frame fully overlapped the existing frame. This then causes use-after-free read
when the TLS handshake processing continues.
The use-after-free read can lead to a Denial-of-Service of the client
application or a minor leak of information about the heap memory contents
that might be overwritten with other data, subsequently allocated by
the application, to the peer.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: Setting an AES-GCM-SIV IV shorter than the expected nonce
length via EVP_CipherInit_ex() may trigger a heap out-of-bounds read.
Supplying a longer IV is silently truncated instead of rejected.
Impact summary: An application passing a caller-supplied IV of the wrong
length may crash or read beyond its buffer. Because trailing IV bytes are
ignored, an attacker who knows one message and tag may forge messages under a
different IV.
CWE: CWE-125: Out-of-bounds Read
Description: AES-GCM-SIV copies the caller-supplied IV or nonce into its
internal state using a copy whose length is taken from the expected nonce size
rather than from the length the caller actually provided. When the caller
passes a shorter IV, the copy reads past the end of the caller's buffer;
AddressSanitizer confirms a heap out-of-bounds read reached through
EVP_CipherInit_ex() into ossl_aes_gcm_siv_init(). When the caller passes a
longer IV, the implementation silently discards the trailing bytes instead of
rejecting the length.
The truncation breaks the binding between the IV and the computed
authentication tag. An attacker who has observed a message and its tag under
one IV can produce a message and tag that verify under a different IV whose
first bytes match, since the surplus bytes never influence the computation.
The message itself is unchanged, so this is a failure of IV commitment rather
than a classic existential forgery.
Only applications that call EVP_CipherInit_ex() (or the equivalent provider
cipher initialization) with an IV length other than the standard 12 bytes for
AES-GCM-SIV are affected. The severity is limited because the out-of-bounds
read is small and attacker-controlled only in length, and the forgery requires
an unusual IV length choice by the application.
FIPS impact: no
The FIPS modules are not affected by this issue, as AES-GCM-SIV is not an
approved algorithm. |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order
is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely.
Impact summary: An attacker able to supply the recipient certificate to an
application performing CMS encryption can cause that application to loop
indefinitely, consuming CPU and resulting in Denial of Service.
CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or
more recipient certificates and, for an EC recipient, generate an ephemeral
key in the recipient's group. If the certificate declares a group order of 1,
random scalar generation can only produce zero. The key generation routine
then retries without limit while waiting for a nonzero private scalar, so the
call never returns.
The OpenSSL TLS and QUIC implementations do not use this path. An application
is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient
certificate whose EC parameters are attacker-controlled. Certificates with
normal EC group orders do not trigger the loop.
OpenSSL 4.0 and later reject unknown explicit EC groups in default builds.
These versions are affected only when configured with the
enable-ec_explicit_curves option.
The result is a hang that consumes a CPU core until the process is
interrupted, a Denial of Service. The severity is Low because the attacker
must supply the recipient certificate and the application must choose to
encrypt to it; ordinary CMS encryption to trusted recipients is unaffected.
The fix makes EC key generation fail when the group has no valid nonzero
private scalar, instead of retrying indefinitely.
FIPS impact: no
The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider
does not support arbitrary explicit EC domain parameters, so an order-1 group
is rejected during key import before the vulnerable key generation path is
reached. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.
Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.
CWE: CWE-125: Out-of-bounds Read
Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.
The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.
Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.
The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: SM2 signature generation uses non-constant-time arithmetic
on secret values, forming a timing side-channel.
Impact summary: An attacker able to measure SM2 signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.
CWE: CWE-208: Observable Timing Discrepancy
Description: SM2 signature generation computes the signature value using
variable-time BIGNUM operations on the secret nonce and the private key, so
the time taken to produce an SM2 signature depends on these secret values,
forming a timing side-channel.
Applications performing SM2 signature generation are affected on all
platforms.
FIPS Impact: no
SM2 is not a FIPS algorithm. |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A CMP client that requests certificate revocation on the basis
of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when
processing a crafted revocation response.
Impact summary: The NULL pointer dereference happens on a read which
leads to a crash and a Denial of Service for the affected client application.
CWE: CWE-476: NULL-pointer dereference
Description: A CMP client revoking a certificate has to tell the server which
certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the
certificate itself or its issuer name and serial number. This is
'openssl cmp -cmd rr -csr <file>' on the command line, or
OSSL_CMP_exec_RR_ses() with the certificate supplied via
OSSL_CMP_CTX_set1_p10CSR() through the API.
A CSR does not contain the issuer name and serial number of the certificate,
so the client does not send them. A server may optionally name the
certificate it revoked in its response, and the client then compares that
name against what it sent. Having sent neither an issuer name nor a serial
number, it has nothing to compare against, and a server returning a specially
crafted name causes the client to read from a NULL pointer and crash.
The revocation response is checked for valid message protection before
the affected code is reached, so an attacker must be a malicious or
compromised CMP server, or a man-in-the-middle in possession of the
secret used for message protection. Clients that identify the certificate
to be revoked by a certificate or by issuer and serial number rather
than by a PKCS#10 CSR are not affected.
FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary. |
| Issue summary: The generic elliptic-curve scalar multiplication used for
ECDSA and SM2 signature operations with curves that do not have a dedicated
implementation leaks information about the secret nonce through timing.
Impact summary: An attacker able to measure signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.
CWE: CWE-208: Observable Timing Discrepancy
Description: The generic elliptic-curve scalar multiplication used for
curves that do not have a dedicated constant-time implementation pads the
secret scalar with non-constant-time BIGNUM operations, so the time taken
depends on the value of the secret scalar derived from the ECDSA and SM2 nonce.
The leak is very small; observing it requires a large number of
measurements. The effect is largest for curves whose group order lies
on a machine-word boundary, such as brainpoolP384r1.
Applications using ECDSA signing over the Brainpool and other generic prime
curves, and SM2 signing on platforms that use the generic implementation,
are vulnerable to this issue.
The NIST curves P-256, P-384 and P-521 use dedicated constant-time
implementations and are not affected.
FIPS Impact: no
The FIPS modules are not affected: the approved NIST curves used in the FIPS
provider have dedicated constant-time implementations and do not use the
affected code path. |
| Issue summary: A certificate with many nameRelativeToCRLIssuer CRL
distribution points causes disproportionate heap growth when OpenSSL caches
X.509 extensions.
Impact summary: Receiving a crafted certificate from a malicious peer can lead
to significant memory pressure and possible Denial of Service in clients or
in servers that solicit client certificates.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: A certificate or a set of certificates that fits under the limit for
size of certificates accepted from the peer (~100 KiB) can result in allocation
of several hundred MiB of resident memory on the receiving side
during a normal TLS handshake. This may be enough to crash the client or
server, if multiple concurrent connections lead to similarly large memory
allocations.
The fix postpones processing of the CRL distribution points extensions in
certificates to the time when the processed value is required for CRL processing.
This avoids keeping large memory allocations for a long time when such
certificates are received.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with
maliciously crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: An application using the OpenSSL HTTP client API functions may
trigger an out-of-bounds read if the 'no_proxy' environment variable is set and
the host portion of the authority component of the HTTP URL is an IPv6 address.
Impact summary: An out-of-bounds read can trigger a crash which leads to
Denial of Service for an application.
The OpenSSL HTTP client API functions can be used directly by applications
but they are also used by the OCSP client functions and CMP (Certificate
Management Protocol) client implementation in OpenSSL. However the URLs used
by these implementations are unlikely to be controlled by an attacker.
In this vulnerable code the out of bounds read can only trigger a crash.
Furthermore the vulnerability requires an attacker-controlled URL to be
passed from an application to the OpenSSL function and the user has to have
a 'no_proxy' environment variable set. For the aforementioned reasons the
issue was assessed as Low severity.
The vulnerable code was introduced in the following patch releases:
3.0.16, 3.1.8, 3.2.4, 3.3.3, 3.4.0 and 3.5.0.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as the HTTP client implementation is outside the OpenSSL FIPS module
boundary. |
| Issue summary: An application trying to decrypt CMS messages encrypted using
password based encryption can trigger an out-of-bounds read and write.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application. The out-of-bounds write can cause
a memory corruption which can have various consequences including
a Denial of Service or Execution of attacker-supplied code.
Although the consequences of a successful exploit of this vulnerability
could be severe, the probability that the attacker would be able to
perform it is low. Besides, password based (PWRI) encryption support in CMS
messages is very rarely used. For that reason the issue was assessed as
Moderate severity according to our Security Policy.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary. |
| Issue summary: A timing side-channel which could potentially allow remote
recovery of the private key exists in the SM2 algorithm implementation on 64 bit
ARM platforms.
Impact summary: A timing side-channel in SM2 signature computations on 64 bit
ARM platforms could allow recovering the private key by an attacker..
While remote key recovery over a network was not attempted by the reporter,
timing measurements revealed a timing signal which may allow such an attack.
OpenSSL does not directly support certificates with SM2 keys in TLS, and so
this CVE is not relevant in most TLS contexts. However, given that it is
possible to add support for such certificates via a custom provider, coupled
with the fact that in such a custom provider context the private key may be
recoverable via remote timing measurements, we consider this to be a Moderate
severity issue.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as SM2 is not an approved algorithm. |
| Issue summary: A timing side-channel which could potentially allow recovering
the private key exists in the ECDSA signature computation.
Impact summary: A timing side-channel in ECDSA signature computations
could allow recovering the private key by an attacker. However, measuring
the timing would require either local access to the signing application or
a very fast network connection with low latency.
There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In particular
the NIST P-521 curve is affected. To be able to measure this leak, the attacker
process must either be located in the same physical computer or must
have a very fast network connection with low latency. For that reason
the severity of this vulnerability is Low.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |