| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Fix error code in drm_client_buffer_vmap_local()
This function accidentally returns zero/success on the failure path.
It leads to locking issues and an uninitialized *map_copy in the
caller. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
Requests the vchan lock before using xdma->stop_request. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Clear napi->skb before dev_kfree_skb_any()
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: keep DMA buffers required for suspend/resume
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. |
| In the Linux kernel, the following vulnerability has been resolved:
Both cadence-quadspi ->runtime_suspend() and ->runtime_resume()
implementations start with:
struct cqspi_st *cqspi = dev_get_drvdata(dev);
struct spi_controller *host = dev_get_drvdata(dev);
This obviously cannot be correct, unless "struct cqspi_st" is the
first member of " struct spi_controller", or the other way around, but
it is not the case. "struct spi_controller" is allocated by
devm_spi_alloc_host(), which allocates an extra amount of memory for
private data, used to store "struct cqspi_st".
The ->probe() function of the cadence-quadspi driver then sets the
device drvdata to store the address of the "struct cqspi_st"
structure. Therefore:
struct cqspi_st *cqspi = dev_get_drvdata(dev);
is correct, but:
struct spi_controller *host = dev_get_drvdata(dev);
is not, as it makes "host" point not to a "struct spi_controller" but
to the same "struct cqspi_st" structure as above.
This obviously leads to bad things (memory corruption, kernel crashes)
directly during ->probe(), as ->probe() enables the device using PM
runtime, leading the ->runtime_resume() hook being called, which in
turns calls spi_controller_resume() with the wrong pointer.
This has at least been reported [0] to cause a kernel crash, but the
exact behavior will depend on the memory contents.
[0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/
This issue potentially affects all platforms that are currently using
the cadence-quadspi driver. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: amdtee: fix race condition in amdtee_open_session
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: fix stuck flows on cleanup due to pending work
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey. |
| In the Linux kernel, the following vulnerability has been resolved:
dm btree remove: assign new_root only when removal succeeds
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory ordering between normal and ordered work functions
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:
pc : submit_compressed_extents+0x38/0x3d0
lr : async_cow_submit+0x50/0xd0
sp : ffff800015d4bc20
<registers omitted for brevity>
Call trace:
submit_compressed_extents+0x38/0x3d0
async_cow_submit+0x50/0xd0
run_ordered_work+0xc8/0x280
btrfs_work_helper+0x98/0x250
process_one_work+0x1f0/0x4ac
worker_thread+0x188/0x504
kthread+0x110/0x114
ret_from_fork+0x10/0x18
Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func. |
| In JetBrains WebStorm before 2026.2 arbitrary code execution was possible before granting project trust via project-local package-manager tooling |
| In JetBrains WebStorm before 2026.2 arbitrary code execution was possible before granting project trust via the configured Node.js interpreter |
| In JetBrains WebStorm before 2026.2 arbitrary code execution was possible via a project-supplied linter configuration |
| Exim before 4.99.5 allows .forward privilege escalation because force_command for a pipe transport is mishandled. |
| Use after free in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash. |
| sqlite3 provides Ruby bindings for the SQLite3 embedded database. In version 2.9.4 and earlier, redefining a SQLite function with a different arity frees the previously registered function handler while SQLite may still reference it, resulting in a use-after-free. This issue is fixed in version 2.9.5. |
| Bridge is affected by an Untrusted Pointer Dereference vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In JetBrains PyCharm before 2026.1.4, 2026.2 arbitrary code execution via malicious Python executable was possible on untrusted project open |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix work UAF on disconnect
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it. |