| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles()
During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process
which will re-order the list if an entry with target pattern is found.
And once one is found, should have aborted the list_for_each_entry. But,
`break` just aborted the inner for-loop. The outer list_for_each_entry
still continues. Normally, only the first entry will match the target
pattern, and the re-ordering will change nothing, so there won't be
soft lockup. However, in some special cases, soft lockup would happen.
Fix it by `goto fill` to break from the list_for_each_entry.
The following is a sample of kernel log for this problem.
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055]
[...]
RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_load_clc()
This comparison should be >= instead of > to prevent an out of bounds
read and write. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links
In mt7925_change_vif_links() devm_kzalloc() may return NULL but this
returned value is not checked. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix memory corruption due to incorrect array size
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Initialize denominator defaults to 1
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
(cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7) |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1298: Add NULL check in ads1298_init
devm_kasprintf() can return a NULL pointer on failure. A check on the
return value of such a call in ads1298_init() is missing. Add it. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix the new buffer was not zeroed before writing
Before writing, if a buffer_head marked as new, its data must
be zeroed, otherwise uninitialized data in the page cache will
be written.
So this commit uses folio_zero_new_buffers() to zero the new
buffers before ->write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
fgraph: Add READ_ONCE() when accessing fgraph_array[]
In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[]
elements, which are fgraph_ops. The loop checks if an element is a
fgraph_stub to prevent using a fgraph_stub afterward.
However, if the compiler reloads fgraph_array[] after this check, it might
race with an update to fgraph_array[] that introduces a fgraph_stub. This
could result in the stub being processed, but the stub contains a null
"func_hash" field, leading to a NULL pointer dereference.
To ensure that the gops compared against the fgraph_stub matches the gops
processed later, add a READ_ONCE(). A similar patch appears in commit
63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]"). |
| In the Linux kernel, the following vulnerability has been resolved:
gve: guard XSK operations on the existence of queues
This patch predicates the enabling and disabling of XSK pools on the
existence of queues. As it stands, if the interface is down, disabling
or enabling XSK pools would result in a crash, as the RX queue pointer
would be NULL. XSK pool registration will occur as part of the next
interface up.
Similarly, xsk_wakeup needs be guarded against queues disappearing
while the function is executing, so a check against the
GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the
disabling of the bit and the synchronize_net() in gve_turndown. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1745: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
In split_large_buddy(), we might call pfn_to_page() on a PFN that might
not exist. In corner cases, such as when freeing the highest pageblock in
the last memory section, this could result with CONFIG_SPARSEMEM &&
!CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and
__section_mem_map_addr() dereferencing that NULL pointer.
Let's fix it, and avoid doing a pfn_to_page() call for the first
iteration, where we already have the page.
So far this was found by code inspection, but let's just CC stable as the
fix is easy. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adding array index check to prevent memory corruption
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: Fix potential null dereference in kunit_device_driver_test()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
These four chips:
* W25N512GW
* W25N01GW
* W25N01JW
* W25N02JW
all require a single bit of ECC strength and thus feature an on-die
Hamming-like ECC engine. There is no point in filling a ->get_status()
callback for them because the main ECC status bytes are located in
standard places, and retrieving the number of bitflips in case of
corrected chunk is both useless and unsupported (if there are bitflips,
then there is 1 at most, so no need to query the chip for that).
Without this change, a kernel warning triggers every time a bit flips. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP
disabled can trigger the following bug, as pcpu_hot is unavailable:
[ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c
[ 8.471849] #PF: supervisor read access in kernel mode
[ 8.471881] #PF: error_code(0x0000) - not-present page
Fix by inlining a return 0 in the !CONFIG_SMP case. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence. |