| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Move vevent memory allocation outside spinlock
The veventq memory allocation happens inside the spinlock. Given its depth
is decided by the user space, this leaves a vulnerability, where userspace
can allocate large queues to exhaust atomic memory reserves.
Move the allocation outside the spinlock and use GFP_NOWAIT, which can fail
fast under memory pressure without dipping into the GFP_ATOMIC reserves or
direct-reclaiming from the threaded IRQ handler. On allocation failure,
queue the lost_events_header (so userspace learns of the drop) and return
-ENOMEM so the caller learns of the kernel-side memory pressure.
This is intentionally distinct from the queue-overflow path, which also
queues the lost_events_header but returns 0: a full queue is an expected
userspace-pacing condition rather than a kernel error.
A subsequent change will cap the upper bound of the veventq_depth. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set veventq_depth upper bound
iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with
an upper bound at U32_MAX.
This leaves a vulnerability where userspace can allocate excessively large
queues to exhaust kernel memory reserves.
Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the
maximum number of entries in the SMMUv3 EVTQ (the largest use case today). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: fix queue limit check to include reordered packets
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the total number of nodes
Currently, the nameserver doesn't limit the number of nodes it handles.
This can be an attack vector if a malicious client starts registering
random nodes, leading to memory exhaustion.
Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is
chosen based on the current platform requirements. If requirement changes
in the future, this limit can be increased. |
| Starlet versions before 0.33 for Perl allow a request declaring a large Content-Length to kill a worker by exhausting memory.
The request body is read in a loop that asks sysread for all of the remaining declared length at once. Perl grows the read buffer to that size before any data arrives, so a length larger than available memory makes the worker exit with an uncatchable out of memory error before the application is called.
A remote attacker can force a worker restart with each request of a few bytes. |
| A flaw was found in Netty's HttpServerCodec. A remote, unauthenticated attacker can exploit this vulnerability by pipelining HTTP/1.1 requests on a single connection and withholding reads. This action causes the methodOverflowQueue to grow without limit, leading to unbounded heap memory consumption and a denial of service due to memory exhaustion. |
| A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum server registration per node
Current code does no bound checking on the number of servers added per
node. A malicious client can flood NEW_SERVER messages and exhaust memory.
Fix this issue by limiting the maximum number of server registrations to
256 per node. If the NEW_SERVER message is received for an old port, then
don't restrict it as it will get replaced. While at it, also rate limit
the error messages in the failure path of qrtr_ns_worker().
Note that the limit of 256 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts
The usbtmc driver accepts timeout values specified by the user in an
ioctl command, and uses these timeouts for some usb_bulk_msg() calls.
Since the user can specify arbitrarily long timeouts and
usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()
instead to avoid the possibility of the user hanging a kernel thread
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Limit the length of unkillable synchronous timeouts
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in wait ioctl
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reserve enough transaction items for qgroup ioctls
Currently our qgroup ioctls don't reserve any space, they just do a
transaction join, which does not reserve any space, neither for the quota
tree updates nor for the delayed refs generated when updating the quota
tree. The quota root uses the global block reserve, which is fine most of
the time since we don't expect a lot of updates to the quota root, or to
be too close to -ENOSPC such that other critical metadata updates need to
resort to the global reserve.
However this is not optimal, as not reserving proper space may result in a
transaction abort due to not reserving space for delayed refs and then
abusing the use of the global block reserve.
For example, the following reproducer (which is unlikely to model any
real world use case, but just to illustrate the problem), triggers such a
transaction abort due to -ENOSPC when running delayed refs:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
# Limit device to 1G so that it's much faster to reproduce the issue.
mkfs.btrfs -f -b 1G $DEV
mount -o commit=600 $DEV $MNT
fallocate -l 800M $MNT/filler
btrfs quota enable $MNT
for ((i = 1; i <= 400000; i++)); do
btrfs qgroup create 1/$i $MNT
done
umount $MNT
When running this, we can see in dmesg/syslog that a transaction abort
happened:
[436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28
[436.493] ------------[ cut here ]------------
[436.494] BTRFS: Transaction aborted (error -28)
[436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372
[436.497] Modules linked in: btrfs loop (...)
[436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[436.510] Tainted: [W]=WARN
[436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs]
[436.514] Code: 0f 82 ea (...)
[436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292
[436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001
[436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80
[436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867
[436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400
[436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000
[436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000
[436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0
[436.530] Call Trace:
[436.530] <TASK>
[436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs]
[436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs]
[436.532] sync_filesystem+0x7a/0x90
[436.533] generic_shutdown_super+0x28/0x180
[436.533] kill_anon_super+0x12/0x40
[436.534] btrfs_kill_super+0x12/0x20 [btrfs]
[436.534] deactivate_locked_super+0x2f/0xb0
[436.534] cleanup_mnt+0xea/0x180
[436.535] task_work_run+0x58/0xa0
[436.535] exit_to_user_mode_loop+0xed/0x480
[436.536] ? __x64_sys_umount+0x68/0x80
[436.536] do_syscall_64+0x2a5/0xf20
[436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[436.537] RIP: 0033:0x7fe5906b6217
[436.538] Code: 0d 00 f7 (...)
[436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217
[436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100
[436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff
[436.544] R10: 0000000000000103 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node
When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during
vmalloc cleanup triggers expensive stack unwinding that acquires RCU read
locks. Processing a large purge_list without rescheduling can cause the
task to hold CPU for extended periods (10+ seconds), leading to RCU stalls
and potential OOM conditions.
The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node()
where iterating through hundreds or thousands of vmap_area entries and
freeing their associated shadow pages causes:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l
...
task:kworker/0:17 state:R running task stack:28840 pid:6229
...
kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299
purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299
Each call to kasan_release_vmalloc() can free many pages, and with
page_owner tracking, each free triggers save_stack() which performs stack
unwinding under RCU read lock. Without yielding, this creates an
unbounded RCU critical section.
Add periodic cond_resched() calls within the loop to allow:
- RCU grace periods to complete
- Other tasks to run
- Scheduler to preempt when needed
The fix uses need_resched() for immediate response under load, with a
batch count of 32 as a guaranteed upper bound to prevent worst-case stalls
even under light load. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - limit RX SG extraction by receive buffer budget
Make af_alg_get_rsgl() limit each RX scatterlist extraction to the
remaining receive buffer budget.
af_alg_get_rsgl() currently uses af_alg_readable() only as a gate
before extracting data into the RX scatterlist. Limit each extraction
to the remaining af_alg_rcvbuf(sk) budget so that receive-side
accounting matches the amount of data attached to the request.
If skcipher cannot obtain enough RX space for at least one chunk while
more data remains to be processed, reject the recvmsg call instead of
rounding the request length down to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| Starlet versions from 0.20 before 0.33 for Perl allow memory exhaustion via unbounded buffering when decoding chunked request bodies.
The decoder adds each read to one buffer of unconsumed input. Nothing limits the length of a chunk-size line, so a line without a CRLF grows the buffer for as long as the client keeps sending, and the read timeout restarts after every read. The data of a large chunk is also held in the buffer until the whole chunk has arrived.
A remote attacker can exhaust a worker's memory with a single request. |
| Allocation of resources without limits or throttling in Apache Wicket.
org.apache.wicket.markup.html.form.upload.resource.AbstractFileUploadResource is the server side of the form-less upload offered by FileUploadToResourceField, which posts the selected files to a separately mounted resource rather than through a Form. The resource is an application-wide singleton with no component to consult, so newResourceResponse() takes the three limits that bound the upload - the total request size, the maximum size of a single part and the maximum number of parts - from the request parameters maxSize, fileMaxSize and fileCountMax, and hands them to the multipart parser as they arrive. Nothing binds those numbers to the field that is supposed to be uploading. A request naming a very large maxSize is therefore parsed with no effective ceiling on the total size, and omitting fileMaxSize and fileCountMax leaves the per-part and part-count limits unset as well. The values the application configured through FileUploadToResourceField#setMaxSize(), #setFileMaxSize() and #setFileCountMax() are consulted only when the client omits the corresponding parameter, so against a client that supplies one they have no effect at all.
Parts above the parser's in-memory threshold are spooled to the container's temporary directory, and the file parts are then copied into the folder the application's IUploadsFileManager owns, under a sub-folder the request names, where they remain. A part that is not a file is read into the heap in full while the request is parsed. One request, repeatable, can therefore consume as much disk or as much heap as the client chooses to send. The resource carries no authorization annotation and the default authorization strategy permits every resource request, so unless the application authorizes the resource itself the request needs no authentication, no session, no prior page view and no user interaction.
An application is affected where it uses FileUploadToResourceField, or mounts FileUploadResourceReference itself. This is not the ordinary upload path: the resource is a singleton that has to be created and mounted deliberately. An application that configures no upload limit at all loses nothing, because Wicket applies no total-size limit of its own by default; what the defect removes is a limit the application set. Uploads through Form with FileUploadField, and through AjaxFileDropBehavior, are not affected, because both read their limits from the component rather than from the request. The upload resource does not exist in the 8.x line.
This issue affects Apache Wicket: from 9.14.0 through 9.24.0, from 10.0.0 through 10.9.1. Users are recommended to upgrade to version 9.25.0 or 10.12.0, which fix the issue. |