Export limit exceeded: 426915 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (30298 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-80607 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE().
CVE-2026-74711 1 Linux 1 Linux Kernel 2026-10-21 8.4 High
In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values.
CVE-2026-68470 1 Linux 1 Linux Kernel 2026-10-21 8.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer.
CVE-2024-53219 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated---
CVE-2026-104681 1 Wordpress-extensions 1 Envira Gallery 2026-10-21 2.7 Low
The Envira Gallery WordPress plugin before 1.16.2 does not verify that an image identifier added to a gallery refers to a media attachment the caller is permitted to view, allowing any user able to create and edit a gallery (Author and above by default) to disclose the title and excerpt of other users' private, draft, pending and trashed posts that WordPress would otherwise withhold from them.
CVE-2026-92999 2026-10-21 5.3 Medium
The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not perform any authorization check on a lead-export handler, allowing unauthenticated users to download every captured contact record (names, email addresses and phone numbers).
CVE-2026-110926 2026-10-21 5.3 Medium
CVE-2026-110926 has been marked as a duplicate of CVE-2026-106582.
CVE-2026-101146 1 Eleveo 1 Quality Management 2026-10-20 4.3 Medium
A security flaw has been discovered in Eleveo Quality Management 9.7.0. This issue affects the function UtilsService.createAndSaveAudit of the file /qm/cz.zoom.scorecard.webui.Scorecard/QMUtilsService of the component GWT RPC Handler. Performing a manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-101143 1 Eleveo 1 Quality Management 2026-10-20 4.3 Medium
A vulnerability was found in Eleveo Quality Management 9.7.0. Affected by this issue is some unknown functionality of the file /qm/cz.zoom.scorecard.webui.Scorecard/cz.zoom.scorecard.webui.Scorecard/QMBODownload. The manipulation results in information disclosure. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-111904 2 Phpmyfaq, Thorsten 2 Phpmyfaq, Phpmyfaq 2026-10-20 5.3 Medium
phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains an information disclosure vulnerability that allows unauthenticated attackers to read hidden open questions due to an inverted api.onlyPublicQuestions check in OpenQuestionController. Attackers can send GET requests to the /api/v4.0/open-questions endpoint to retrieve non-public moderation or internal questions and their associated usernames.
CVE-2026-101356 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-20 9.1 Critical
Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users. This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue.
CVE-2026-107755 1 Apache 1 Couchdb 2026-10-20 N/A
Insufficient filtering of credentials in the _replicator database in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to read replication credentials of other users’ replications, not just their own. Users are recommended to upgrade to version 3.5.3, which fixes this issue.
CVE-2026-112991 1 Misp 2 Misp-modules, Misp Modules \(html To Markdown Expansion Module\) 2026-10-20 N/A
The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128). An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks. The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources.
CVE-2026-107187 1 Eptura 1 Archibus 2026-10-20 8.5 High
A user can access any database details, such as usernames and passwords by sending a DWR request with a specified workflow rule. The authentication bypass vulnerability can be chained with this vulnerability to perform database reads without authentication. Database write and delete operations may also be possible, but this was untested.
CVE-2026-110180 1 Fast-uri 1 Fast-uri 2026-10-20 4.8 Medium
fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions from 2.4.2 through 2.4.7, from 3.1.3 through 3.1.8, and from 4.0.1 through 4.2.2, for HTTP-family schemes the canonicalizeHost() function passes the parsed host to the WHATWG URL parser and adopts its hostname without checking that the parser consumed the entire input as a host, so the authority can be silently rewritten: data before an at-sign is dropped and tab, carriage-return, and line-feed characters are stripped, with no error reported. An application that enforces host-based policy such as denylists, loopback filtering, redirect validation, or outbound proxy routing on one representation can then see the canonical host diverge from what it checked, allowing traffic to be steered to an unintended destination. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject an authority that contains more than one at-sign or any tab, carriage-return, or line-feed before calling fast-uri, or treat any non-empty parse error as fatal and compare hosts only from the same parse result.
CVE-2026-112953 1 Apostrophecms 2 Apostrophecms, Import-export 2026-10-20 N/A
ApostropheCMS is an open-source Node.js content management system. Prior to 3.7.1 of the import-export module, predictable export archive filenames allow an unauthenticated requester to download another user's export from publicly readable export storage before the archive expires or is removed. A user with export permission must first create the archive, and sites with exports disabled, private upload storage, or authenticated upload delivery are not exposed through this network-download path. This issue is fixed in version 3.7.1.
CVE-2026-113668 1 Apostrophecms 1 Apostrophecms 2026-10-20 5.3 Medium
ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the REST route GET /api/v1/<piece-type>/:_id/locales (and the equivalent page route) does not apply the publicApiCheckAsync gate that ApostropheCMS's other read routes enforce. An unauthenticated caller can therefore query this route for any document _id and learn whether the document exists and which locales it is published in — a document-existence and locale-metadata disclosure that the read-API is otherwise supposed to gate. This issue is fixed in version 4.33.0.
CVE-2026-98702 1 Linux 1 Linux Kernel 2026-10-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read.
CVE-2026-69080 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-20 7.5 High
Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-69077 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-20 7.5 High
Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.