| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: use pages instead of pointer for kernel direct IO
When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
Modules linked in:
CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:__alloc_pages+0x2bf/0x380
......
Call Trace:
<TASK>
? __warn+0x8e/0x150
? __alloc_pages+0x2bf/0x380
__kmalloc_large_node+0x86/0x160
__kmalloc+0x33c/0x480
virtio_fs_enqueue_req+0x240/0x6d0
virtio_fs_wake_pending_and_unlock+0x7f/0x190
queue_request_and_unlock+0x55/0x60
fuse_simple_request+0x152/0x2b0
fuse_direct_io+0x5d2/0x8c0
fuse_file_read_iter+0x121/0x160
__kernel_read+0x151/0x2d0
kernel_read+0x45/0x50
kernel_read_file+0x1a9/0x2a0
init_module_from_file+0x6a/0xe0
idempotent_init_module+0x175/0x230
__x64_sys_finit_module+0x5d/0xb0
x64_sys_call+0x1c3/0x9e0
do_syscall_64+0x3d/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
......
</TASK>
---[ end trace 0000000000000000 ]---
The warning is triggered as follows:
1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.
2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().
3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().
4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():
if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
return NULL;
5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.
A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.
So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.
After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.
It may seem necessary to introduce another fie
---truncated--- |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that an image identifier added to a gallery refers to a media attachment the caller is permitted to view, allowing any user able to create and edit a gallery (Author and above by default) to disclose the title and excerpt of other users' private, draft, pending and trashed posts that WordPress would otherwise withhold from them. |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not perform any authorization check on a lead-export handler, allowing unauthenticated users to download every captured contact record (names, email addresses and phone numbers). |
| CVE-2026-110926 has been marked as a duplicate of CVE-2026-106582. |
| A security flaw has been discovered in Eleveo Quality Management 9.7.0. This issue affects the function UtilsService.createAndSaveAudit of the file /qm/cz.zoom.scorecard.webui.Scorecard/QMUtilsService of the component GWT RPC Handler. Performing a manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Eleveo Quality Management 9.7.0. Affected by this issue is some unknown functionality of the file /qm/cz.zoom.scorecard.webui.Scorecard/cz.zoom.scorecard.webui.Scorecard/QMBODownload. The manipulation results in information disclosure. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains an information disclosure vulnerability that allows unauthenticated attackers to read hidden open questions due to an inverted api.onlyPublicQuestions check in OpenQuestionController. Attackers can send GET requests to the /api/v4.0/open-questions endpoint to retrieve non-public moderation or internal questions and their associated usernames. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| Insufficient filtering of credentials in the _replicator database in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to read replication credentials of other users’ replications, not just their own.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128).
An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks.
The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources. |
| A user can access any database details, such as usernames and passwords by sending a DWR request with a specified workflow rule. The authentication bypass vulnerability can be chained with this vulnerability to perform database reads without authentication. Database write and delete operations may also be possible, but this was untested. |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions from 2.4.2 through 2.4.7, from 3.1.3 through 3.1.8, and from 4.0.1 through 4.2.2, for HTTP-family schemes the canonicalizeHost() function passes the parsed host to the WHATWG URL parser and adopts its hostname without checking that the parser consumed the entire input as a host, so the authority can be silently rewritten: data before an at-sign is dropped and tab, carriage-return, and line-feed characters are stripped, with no error reported. An application that enforces host-based policy such as denylists, loopback filtering, redirect validation, or outbound proxy routing on one representation can then see the canonical host diverge from what it checked, allowing traffic to be steered to an unintended destination. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject an authority that contains more than one at-sign or any tab, carriage-return, or line-feed before calling fast-uri, or treat any non-empty parse error as fatal and compare hosts only from the same parse result. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 3.7.1 of the import-export module, predictable export archive filenames allow an unauthenticated requester to download another user's export from publicly readable export storage before the archive expires or is removed. A user with export permission must first create the archive, and sites with exports disabled, private upload storage, or authenticated upload delivery are not exposed through this network-download path. This issue is fixed in version 3.7.1. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the REST route GET /api/v1/<piece-type>/:_id/locales (and the equivalent page route) does not apply the publicApiCheckAsync gate that ApostropheCMS's other read routes enforce. An unauthenticated caller can therefore query this route for any document _id and learn whether the document exists and which locales it is published in — a document-existence and locale-metadata disclosure that the read-API is otherwise supposed to gate. This issue is fixed in version 4.33.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reject invalid 320 MHz CSA bandwidth
The HT/VHT channel definition validator can receive a 320 MHz
bandwidth indication from a received CSA frame on a non-6 GHz link.
It warns for this unsupported width but continues with an uninitialized
vht_operation.chan_width, which is then read by
ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a
received frame panic the kernel.
Reject the channel definition before entering the VHT operation
conversion. This preserves the existing CSA fallback while avoiding
both the warning and the uninitialized read. |
| Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: replace bind when clearing stale local source
The UDP output fallback clears bind->local in place when the remembered
source address is no longer usable. The bind is RCU-published and read
locklessly by concurrent TX, so an IPv6 reader can observe a torn
address.
Retry the route lookup with source address autoselection without
modifying the bind. After a successful lookup, revalidate the bind and
route key under peer->lock, reset the dst cache, and best-effort publish
a replacement bind with a wildcard local address.
Do not cache the resolved dst when clearing the local source. Replacing
the source invalidates all per-CPU cache entries, while
dst_cache_set_ip4 and dst_cache_set_ip6 update only the current CPU
slot. The current packet can still use the resolved route; if bind
allocation fails, a later cache miss retries the repair. |