Search Results (5250 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-46080 1 Linux 1 Linux Kernel 2026-11-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions.
CVE-2026-107123 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-06 7.5 High
A flaw was found in the SAML XML processing component of Keycloak, an open-source identity and access management solution. The issue occurs when the server parses XML documents containing excessively long dateTime or duration values. Because these strings are not properly validated before processing, the XML parser consumes excessive CPU time. An unauthenticated remote attacker can exploit this by sending specially crafted SAML requests to the server, leading to high CPU utilization and a denial of service for all users.
CVE-2026-99254 1 Linux 2 Linux, Linux Kernel 2026-11-06 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: io_uring: don't flood a cancelling task with task_work io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round.
CVE-2026-0074 1 Google 1 Android 2026-11-06 5.5 Medium
In getPreferredSize of LauncherProcessImageListener.kt, there is a possible denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.
CVE-2026-0049 1 Google 1 Android 2026-11-06 6.2 Medium
In onHeaderDecoded of LocalImageResolver.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.
CVE-2026-45888 1 Linux 1 Linux Kernel 2026-11-06 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix memory leak in raid1_run() raid1_run() calls setup_conf() which registers a thread via md_register_thread(). If raid1_set_limits() fails, the previously registered thread is not unregistered, resulting in a memory leak of the md_thread structure and the thread resource itself. Add md_unregister_thread() to the error path to properly cleanup the thread, which aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVE-2026-64860 2026-11-06 6.5 Medium
ESP-Protocols is a collection of protocol components for ESP-IDF. Prior to mDNS version 1.11.2, the `mdns` component follows DNS name-compression pointers recursively when parsing fully qualified domain names (FQDNs) in inbound mDNS packets without capping pointer-follow depth in `mdns_utils_read_fqdn()`. An unauthenticated attacker on the same link-local network can send a crafted packet to UDP port 5353 on an `ESP-IDF` device using `espressif/mdns` with mDNS enabled. Deep recursion exhausts the fixed-size stack of the mDNS FreeRTOS task, causing a controlled panic and reboot; persistent malicious traffic can cause a crash loop. No confidentiality or integrity impact has been demonstrated, and remote code execution is not claimed. This issue is fixed in mDNS version 1.11.2.
CVE-2026-122052 1 Laspy 1 Laspy 2026-11-06 4.3 Medium
A vulnerability has been found in laspy up to 2.7.0. Affected by this issue is some unknown functionality of the file laspy/lasreader.py of the component LAS File Handler. The manipulation leads to uncontrolled memory allocation. Remote exploitation of the attack is possible.
CVE-2023-5870 2 Postgresql, Redhat 23 Postgresql, Advanced Cluster Security, Codeready Linux Builder Eus and 20 more 2026-11-06 2.2 Low
A flaw was found in PostgreSQL involving the pg_cancel_backend role that signals background workers, including the logical replication launcher, autovacuum workers, and the autovacuum launcher. Successful exploitation requires a non-core extension with a less-resilient background worker and would affect that specific background worker only. This issue may allow a remote high privileged user to launch a denial of service (DoS) attack.
CVE-2026-6844 2 Gnu, Redhat 8 Binutils, Enterprise Linux, Hardened Images and 5 more 2026-11-06 5.5 Medium
A flaw was found in the `readelf` utility of the binutils package. A local attacker could exploit two Denial of Service (DoS) vulnerabilities by providing a specially crafted Executable and Linkable Format (ELF) file. One vulnerability, a resource exhaustion (CWE-400), can lead to an out-of-memory condition. The other, a null pointer dereference (CWE-476), can cause a segmentation fault. Both issues can result in the `readelf` utility becoming unresponsive or crashing, leading to a denial of service.
CVE-2025-25208 1 Redhat 2 Connectivity Link, Openshift Ai 2026-11-06 5.7 Medium
A Developer persona can bring down the Authorino service, preventing the evaluation of all AuthPolicies on the cluster
CVE-2025-25207 1 Redhat 2 Connectivity Link, Openshift Ai 2026-11-06 5.7 Medium
The Authorino service in the Red Hat Connectivity Link is the authorization service for zero trust API security. Authorino allows the users with developer persona to add callbacks to be executed to HTTP endpoints once the authorization process is completed. It was found that an attacker with developer persona access can add a large number of those callbacks to be executed by Authorino and as the authentication policy is enforced by a single instance of the service, this leada to a Denial of Service in Authorino while processing the post-authorization callbacks.
CVE-2026-114349 1 Apache 1 Kafka 2026-11-06 6.5 Medium
When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size. Impact: An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record  is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited.
CVE-2026-95512 2 Freetype, Redhat 7 Freetype, Build Of Openjdk 11 Els, Enterprise Linux and 4 more 2026-11-06 5.5 Medium
A flaw was found in FreeType, specifically within its CID font loader. A remote attacker could exploit this vulnerability by tricking a user into opening content that embeds or references a specially crafted CID-keyed font. This crafted font can cause repeated allocations and decryptions of subroutine data across multiple font dictionaries, leading to excessive memory and CPU consumption. This can result in a denial of service (DoS) for the application or service processing the font, potentially causing it to hang or terminate.
CVE-2026-93007 3 Dnsmasq, Red Hat, Redhat 9 Dnsmasq, Enterprise Linux, Ceph Storage and 6 more 2026-11-06 5.3 Medium
A flaw was found in dnsmasq. The TCP DNS service uses a small fixed pool of child processes and does not set a receive timeout on client connections. A remote attacker can open idle TCP connections to port 53 and occupy the entire pool, preventing new TCP DNS connections and DNSSEC validation that requires TCP fallback. UDP DNS resolution continues, and occupied slots are released after a fixed lifetime.
CVE-2026-94449 1 Redhat 6 Apache Camel Quarkus, Apicurio Registry, Camel Quarkus and 3 more 2026-11-06 7.5 High
A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory.
CVE-2026-101427 1 Oracle 1 Peoplesoft Enterprise Peopletools 2026-11-05 8.1 High
Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H).
CVE-2026-101426 1 Oracle 1 Peoplesoft Enterprise Peopletools 2026-11-05 6.9 Medium
Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 6.9 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:C/C:N/I:H/A:H).
CVE-2026-23252 1 Linux 1 Linux Kernel 2026-11-05 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: get rid of the xchk_xfile_*_descr calls The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate memory if the formatted string is larger than 16 bytes (or whatever the nofail guarantees are nowadays). Some of them could easily exceed that, and Jiaming Zhang found a few places where that can happen with syzbot. The descriptions are debugging aids and aren't required to be unique, so let's just pass in static strings and eliminate this path to failure. Note this patch touches a number of commits, most of which were merged between 6.6 and 6.14.
CVE-2026-23113 1 Linux 1 Linux Kernel 2026-11-05 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: <TASK> context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There's really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again.