| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N). |
| Improper Certificate Validation (CWE-295) in the operating system certificate bundle shipped in the Docker images of APM Server; Auditbeat, Filebeat, Heartbeat, Metricbeat and Packetbeat; Elastic Agent, including Fleet Server and Cloudbeat; Logstash, for TLS connections that use the operating system certificate bundle; Elastic connectors; Universal Profiling (host agent, collector and symbolizer); and Elastic Maps Server. This certificate bundle, a dependency of these products (Dependency on Vulnerable Third-Party Component, CWE-1395), could allow an attacker to intercept or modify TLS-protected traffic via Signature Spoofing by Key Theft (CAPEC-474). The certificate bundle includes root certificate authorities that signed eight eMudhra intermediate certificate authorities whose private keys are compromised. Anyone with these keys can issue a certificate for any host name that these products accept as trusted. Exploitation requires an attacker in a network position between the product and the remote party, who presents a certificate issued with one of the compromised keys. |
| Nanosystems Supremo for Windows and macOS before 5.0.2.3874 contains an improper certificate validation vulnerability that allows adjacent attackers to intercept TLS connections by presenting untrusted certificates. Attackers on the same network can terminate and relay the client's TLS session using self-signed certificates to read usernames, SHA-256 password hashes, and license codes. |
| vault-java-driver, a Java client for HashiCorp Vault, silently disables TLS certificate and hostname verification in three states where the caller asked for verification: an SslConfig passed to VaultConfig without calling build(), an SslConfig restored by Java deserialization, and VAULT_SSL_VERIFY set to a truthy value other than "true", such as 1, yes or on. In each case SslConfig.isVerify() returns false and the driver installs a trust-all SSLContext. An attacker on the network path to the Vault server can then read the Vault token and secrets in transit and forge responses. This issue affects io.github.jopenlibs:vault-java-driver 5.2.0 through 6.2.3. It is fixed in 7.0.0. |
| Cendio ThinLinc contains an improper authentication vulnerability in its browser-based web client (tlwebaccess) that allows an authenticated attacker to impersonate any other user, including root, by exploiting flaws in multi-step authentication flows such as one-time passwords, login banners, or expired password prompts. Attackers can leverage this authentication bypass during the multi-step login process to gain unauthorized access to other user accounts, including administrative privileges, in versions from 4.1.0 through 4.20.0. |
| A session validation vulnerability has been identified in the SonicOS management interface, which in specific conditions could potentially enable a remote unauthenticated attacker to perform unauthorized operations. |
| Tanium addressed an improper certificate validation vulnerability in multiple products. Products have been updated to distrust several intermediate CA certificates associated with compromised private keys. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, improper verification of cryptographic signatures and improper certificate validation in RadPdfProcessing digital signature validation allow an unauthenticated attacker to cause signature validation to report forged content as unmodified and its signing certificate as valid via a crafted signed PDF document. |
| The ZSIRep client library (ZSIREP.CLIENT.DLL) is vulnerable to improper server certificate validation. It registers a process-wide .NET callback that accepts any certificate for HTTPS connections without verification. This allows a man-in-the-middle attacker to impersonate the ZSIRep server and intercept or modify authentication data and documents. The callback persists after the client is closed, weakening other HTTPS connections in the same application.
The issue was fixed in version 2.12.3.1. The library is used in KS-SOMED (fixed in 2026.03.0.01), KS-PPS (fixed in 2026.03.1.0), KS-MEDIS (fixed in 2026.03.0.0), KS-SOLAB (fixed in 2026.3.1.0), and KS-ASW (fixed in 2026.3.0.1). |
| Apache WSS4J remembers the Nonce of each UsernameToken it accepts, so a captured token cannot be reused. It stored the Nonce as raw base64 text, but authentication decodes that text and uses the bytes.The same bytes can be written as base64 in several ways. An attacker who captured an authenticated request could re-send it with a space added to the Nonce: the password digest still verified, but the token no longer matched the remembered one, so the replay was accepted. Since a UsernameToken does not cover the message body, the captured token could then be reused on requests of the attacker's choosing until it expired. Affects deployments with a nonce replay cache configured, as Apache CXF has by default, and only tokens using a password digest. The cache is now keyed on the decoded Nonce. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. |
| A vulnerability was found in the internal Access Control List (ACL) subsystem of kronosnet (Version affected: <= 1.34). When the framework is explicitly configured to manage dynamic links (accepting network traffic from any IP address) without network payload encryption, the validation architecture implicitly trusts the link ID provided within incoming data packets. A remote, unauthenticated attacker can exploit this lack of validation by spoofing a legitimate link ID inside crafted network frames. This allows the attacker to fully bypass the ACL framework and inject arbitrary data packets into the application layer, potentially leading to data corruption or service instabilities. |
| A security vulnerability was discovered in SUSE Rancher Fleet's cluster registration flow, in Fleet versions before 0.12, 0.13.0 up to 0.13.17, 0.14.0 up to 0.14.12, 0.15.0 up t o 0.15.17 and 0.16.0 up to 0.16.3. The cluster identity claimed by a registration request was accepted without being bound to the registration token that the request was made with. As a result, a registration request could be associated with a managed cluster that was originally registered with a different registration token. |
| The Dokan: AI Powered WooCommerce Multivendor Marketplace Solution WordPress plugin before 5.3.3 does not use a trusted site-owned sender address when relaying its store contact form, instead placing the unauthenticated submitter's supplied address directly in the message's From header rather than a Reply-To, allowing unauthenticated attackers to make the site email its own vendors with the sender spoofed to an address at the site's own domain (such as its administrator), aligned with the domain's own SPF/DKIM. |
| Improper Validation of Certificate with Host Mismatch vulnerability in deadtrickster ssl_verify_fun allows an adversary in the middle to impersonate a TLS peer via a certificate that carries a partial-label wildcard. try_match_wildcard/4 in src/ssl_verify_hostname.erl anchors only the text before and after the * of an identifier such as f*.example.net, so the wildcard also consumes dots and the certificate is accepted for f.evil.example.net. RFC 6125 confines a wildcard to the left-most label. The same matcher lets *.168.1.1 match the IP literal 192.168.1.1. Whole-label wildcards are matched correctly.
Erlang/OTP 20.0 and later check the hostname in ssl before a user verify_fun sees valid_peer, so a client that keeps server_name_indication set rejects the mismatch regardless. Exposed are clients that disable SNI, servers that verify client certificate hostnames with this library, and direct callers of verify_cert_hostname/2.
This issue affects ssl_verify_fun: from 1.0.1 before 1.1.8. |
| Acceptance of Extraneous Untrusted Data With Trusted Data vulnerability in the Sign in with Apple strategy in pow-auth Assent allows an unauthenticated remote attacker to impersonate another user via the user parameter of the authorization callback.
Apple posts the user's name to the callback endpoint in a user form parameter that the browser submits and the client controls. Assent.Strategy.Apple.callback/2 in lib/assent/strategies/apple.ex decodes that parameter, and fetch_user/2 merges it over the claims of the verified ID token, so the unverified map wins. An attacker who completes a Sign in with Apple login with their own Apple ID and edits the user parameter can replace sub, email, and any other claim. Applications that look up, link, or authorize accounts by the returned subject or email then act on the attacker's values.
This issue affects assent: from 0.1.25 before 0.3.2. |
| GPUStack is an open-source GPU cluster manager for AI model serving and GPU instance provisioning. From 0.7.1 until 2.2.2, the /auth/saml/callback endpoint decoded SAML XML, used its NameID and attributes to resolve or provision a user, and minted a gpustack_session JWT without calling OneLogin_Saml2_Auth.process_response to verify the signature, issuer, audience, destination, or time conditions. Any network client could submit an identity for an existing user, including an administrator, or provision a new non-administrator account, even when SAML was not configured. Response and Assertion identifiers were not consumed, so captured signed responses could also be replayed. This issue is fixed in version 2.2.2. |
| A flaw was found in JSS (Java Security Services). The JSSTrustManager class does not verify NSS trust flags when validating CA certificates, allowing certificates present in the NSS database without TRUSTED_CA flags to be accepted as trust anchors for TLS connections. In non-default configurations where certificate revocation checking is disabled, this could allow a man-in-the-middle attacker to forge certificates accepted by PKI client connections. |
| When using the OpenSSL TLS implementation, both the pn_ssl_domain_set_trusted_ca_db() & pn_tls_config_set_trusted_certs() APIs added to rather than replaced the default system trust anchors. Leading to potentially trusting unexpected peer certificates.
This can be worked around by setting the SSL_CERT_FILE environment variable for the application to /dev/null.
This issue does not affect the Win32 SChannel TLS implementation.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Authentication Bypass by Spoofing vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Session theft. |