Export limit exceeded: 430475 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26719 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-40120 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before.
CVE-2025-40119 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy().
CVE-2025-40127 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: hwrng: ks-sa - fix division by zero in ks_sa_rng_init Fix division by zero in ks_sa_rng_init caused by missing clock pointer initialization. The clk_get_rate() call is performed on an uninitialized clk pointer, resulting in division by zero when calculating delay values. Add clock initialization code before using the clock. drivers/char/hw_random/ks-sa-rng.c | 7 +++++++ 1 file changed, 7 insertions(+)
CVE-2025-68743 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: mshv: Fix create memory region overlap check The current check is incorrect; it only checks if the beginning or end of a region is within an existing region. This doesn't account for userspace specifying a region that begins before and ends after an existing region. Change the logic to a range intersection check against gfns and uaddrs for each region. Remove mshv_partition_region_by_uaddr() as it is no longer used.
CVE-2025-40115 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e
CVE-2025-68744 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bpf: Free special fields when update [lru_,]percpu_hash maps As [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missing calls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause the memory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until the map gets freed. Fix this by calling 'bpf_obj_free_fields()' after 'copy_map_value[,_long]()' in 'pcpu_copy_value()'.
CVE-2025-40110 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code.
CVE-2025-40108 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped.
CVE-2025-40107 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks.
CVE-2025-68778 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: don't log conflicting inode if it's a dir moved in the current transaction We can't log a conflicting inode if it's a directory and it was moved from one parent directory to another parent directory in the current transaction, as this can result an attempt to have a directory with two hard links during log replay, one for the old parent directory and another for the new parent directory. The following scenario triggers that issue: 1) We have directories "dir1" and "dir2" created in a past transaction. Directory "dir1" has inode A as its parent directory; 2) We move "dir1" to some other directory; 3) We create a file with the name "dir1" in directory inode A; 4) We fsync the new file. This results in logging the inode of the new file and the inode for the directory "dir1" that was previously moved in the current transaction. So the log tree has the INODE_REF item for the new location of "dir1"; 5) We move the new file to some other directory. This results in updating the log tree to included the new INODE_REF for the new location of the file and removes the INODE_REF for the old location. This happens during the rename when we call btrfs_log_new_name(); 6) We fsync the file, and that persists the log tree changes done in the previous step (btrfs_log_new_name() only updates the log tree in memory); 7) We have a power failure; 8) Next time the fs is mounted, log replay happens and when processing the inode for directory "dir1" we find a new INODE_REF and add that link, but we don't remove the old link of the inode since we have not logged the old parent directory of the directory inode "dir1". As a result after log replay finishes when we trigger writeback of the subvolume tree's extent buffers, the tree check will detect that we have a directory a hard link count of 2 and we get a mount failure. The errors and stack traces reported in dmesg/syslog are like this: [ 3845.729764] BTRFS info (device dm-0): start tree-log replay [ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c [ 3845.731236] memcg:ffff9264c02f4e00 [ 3845.731751] aops:btree_aops [btrfs] ino:1 [ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8 [ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00 [ 3845.735305] page dumped because: eb page dump [ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir [ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5 [ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701 [ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384 [ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0 [ 3845.737797] rdev 0 sequence 2 flags 0x0 [ 3845.737798] atime 1764259517.0 [ 3845.737800] ctime 1764259517.572889464 [ 3845.737801] mtime 1764259517.572889464 [ 3845.737802] otime 1764259517.0 [ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [ 3845.737805] index 0 name_len 2 [ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34 [ 3845.737808] location key (257 1 0) type 2 [ 3845.737810] transid 9 data_len 0 name_len 4 [ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34 [ 3845.737813] location key (258 1 0) type 2 [ 3845.737814] transid 9 data_len 0 name_len 4 [ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [ 3845.737816] location key (257 1 0) type 2 [ ---truncated---
CVE-2025-68751 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Fix false-positive kmsan report in fpu_vstl() A false-positive kmsan report is detected when running ping command. An inline assembly instruction 'vstl' can write varied amount of bytes depending on value of 'index' argument. If 'index' > 0, 'vstl' writes at least 2 bytes. clang generates kmsan write helper call depending on inline assembly constraints. Constraints are evaluated compile-time, but value of 'index' argument is known only at runtime. clang currently generates call to __msan_instrument_asm_store with 1 byte as size. Manually call kmsan function to indicate correct amount of bytes written and fix false-positive report. This change fixes following kmsan reports: [ 36.563119] ===================================================== [ 36.563594] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 36.563852] virtqueue_add+0x35c6/0x7c70 [ 36.564016] virtqueue_add_outbuf+0xa0/0xb0 [ 36.564266] start_xmit+0x288c/0x4a20 [ 36.564460] dev_hard_start_xmit+0x302/0x900 [ 36.564649] sch_direct_xmit+0x340/0xea0 [ 36.564894] __dev_queue_xmit+0x2e94/0x59b0 [ 36.565058] neigh_resolve_output+0x936/0xb40 [ 36.565278] __neigh_update+0x2f66/0x3a60 [ 36.565499] neigh_update+0x52/0x60 [ 36.565683] arp_process+0x1588/0x2de0 [ 36.565916] NF_HOOK+0x1da/0x240 [ 36.566087] arp_rcv+0x3e4/0x6e0 [ 36.566306] __netif_receive_skb_list_core+0x1374/0x15a0 [ 36.566527] netif_receive_skb_list_internal+0x1116/0x17d0 [ 36.566710] napi_complete_done+0x376/0x740 [ 36.566918] virtnet_poll+0x1bae/0x2910 [ 36.567130] __napi_poll+0xf4/0x830 [ 36.567294] net_rx_action+0x97c/0x1ed0 [ 36.567556] handle_softirqs+0x306/0xe10 [ 36.567731] irq_exit_rcu+0x14c/0x2e0 [ 36.567910] do_io_irq+0xd4/0x120 [ 36.568139] io_int_handler+0xc2/0xe8 [ 36.568299] arch_cpu_idle+0xb0/0xc0 [ 36.568540] arch_cpu_idle+0x76/0xc0 [ 36.568726] default_idle_call+0x40/0x70 [ 36.568953] do_idle+0x1d6/0x390 [ 36.569486] cpu_startup_entry+0x9a/0xb0 [ 36.569745] rest_init+0x1ea/0x290 [ 36.570029] start_kernel+0x95e/0xb90 [ 36.570348] startup_continue+0x2e/0x40 [ 36.570703] [ 36.570798] Uninit was created at: [ 36.571002] kmem_cache_alloc_node_noprof+0x9e8/0x10e0 [ 36.571261] kmalloc_reserve+0x12a/0x470 [ 36.571553] __alloc_skb+0x310/0x860 [ 36.571844] __ip_append_data+0x483e/0x6a30 [ 36.572170] ip_append_data+0x11c/0x1e0 [ 36.572477] raw_sendmsg+0x1c8c/0x2180 [ 36.572818] inet_sendmsg+0xe6/0x190 [ 36.573142] __sys_sendto+0x55e/0x8e0 [ 36.573392] __s390x_sys_socketcall+0x19ae/0x2ba0 [ 36.573571] __do_syscall+0x12e/0x240 [ 36.573823] system_call+0x6e/0x90 [ 36.573976] [ 36.574017] Byte 35 of 98 is uninitialized [ 36.574082] Memory access of size 98 starts at 0000000007aa0012 [ 36.574218] [ 36.574325] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G B N 6.17.0-dirty #16 NONE [ 36.574541] Tainted: [B]=BAD_PAGE, [N]=TEST [ 36.574617] Hardware name: IBM 3931 A01 703 (KVM/Linux) [ 36.574755] ===================================================== [ 63.532541] ===================================================== [ 63.533639] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 63.533989] virtqueue_add+0x35c6/0x7c70 [ 63.534940] virtqueue_add_outbuf+0xa0/0xb0 [ 63.535861] start_xmit+0x288c/0x4a20 [ 63.536708] dev_hard_start_xmit+0x302/0x900 [ 63.537020] sch_direct_xmit+0x340/0xea0 [ 63.537997] __dev_queue_xmit+0x2e94/0x59b0 [ 63.538819] neigh_resolve_output+0x936/0xb40 [ 63.539793] ip_finish_output2+0x1ee2/0x2200 [ 63.540784] __ip_finish_output+0x272/0x7a0 [ 63.541765] ip_finish_output+0x4e/0x5e0 [ 63.542791] ip_output+0x166/0x410 [ 63.543771] ip_push_pending_frames+0x1a2/0x470 [ 63.544753] raw_sendmsg+0x1f06/0x2180 [ 63.545033] inet_sendmsg+0xe6/0x190 [ 63.546006] __sys_sendto+0x55e/0x8e0 ---truncated---
CVE-2025-40106 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands.
CVE-2025-68754 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: rtc: amlogic-a4: fix double free caused by devm The clock obtained via devm_clk_get_enabled() is automatically managed by devres and will be disabled and freed on driver detach. Manually calling clk_disable_unprepare() in error path and remove function causes double free. Remove the redundant clk_disable_unprepare() calls from the probe error path and aml_rtc_remove(), allowing the devm framework to automatically manage the clock lifecycle.
CVE-2025-68756 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period.
CVE-2025-68757 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/vgem-fence: Fix potential deadlock on release A timer that expires a vgem fence automatically in 10 seconds is now released with timer_delete_sync() from fence->ops.release() called on last dma_fence_put(). In some scenarios, it can run in IRQ context, which is not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while working on new IGT subtests syncobj_timeline@stress-* as user space replacements of some problematic test cases of a dma-fence-chain selftest [1]. [117.004338] ================================ [117.004340] WARNING: inconsistent lock state [117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U [117.004346] -------------------------------- [117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes: [117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190 [117.004361] {HARDIRQ-ON-W} state was registered at: [117.004363] lock_acquire+0xc4/0x2e0 [117.004366] call_timer_fn+0x80/0x2a0 [117.004368] __run_timers+0x231/0x310 [117.004370] run_timer_softirq+0x76/0xe0 [117.004372] handle_softirqs+0xd4/0x4d0 [117.004375] __irq_exit_rcu+0x13f/0x160 [117.004377] irq_exit_rcu+0xe/0x20 [117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004385] cpuidle_enter_state+0x12b/0x8a0 [117.004388] cpuidle_enter+0x2e/0x50 [117.004393] call_cpuidle+0x22/0x60 [117.004395] do_idle+0x1fd/0x260 [117.004398] cpu_startup_entry+0x29/0x30 [117.004401] start_secondary+0x12d/0x160 [117.004404] common_startup_64+0x13e/0x141 [117.004407] irq event stamp: 2282669 [117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.004426] other info that might help us debug this: [117.004429] Possible unsafe locking scenario: [117.004432] CPU0 [117.004433] ---- [117.004434] lock((&fence->timer)); [117.004436] <Interrupt> [117.004438] lock((&fence->timer)); [117.004440] *** DEADLOCK *** [117.004443] 1 lock held by swapper/0/0: [117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0 [117.004450] stack backtrace: [117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004456] Call Trace: [117.004456] <IRQ> [117.004457] dump_stack_lvl+0x91/0xf0 [117.004460] dump_stack+0x10/0x20 [117.004461] print_usage_bug.part.0+0x260/0x360 [117.004463] mark_lock+0x76e/0x9c0 [117.004465] ? register_lock_class+0x48/0x4a0 [117.004467] __lock_acquire+0xbc3/0x2860 [117.004469] lock_acquire+0xc4/0x2e0 [117.004470] ? __timer_delete_sync+0x4b/0x190 [117.004472] ? __timer_delete_sync+0x4b/0x190 [117.004473] __timer_delete_sync+0x68/0x190 [117.004474] ? __timer_delete_sync+0x4b/0x190 [117.004475] timer_delete_sync+0x10/0x20 [117.004476] vgem_fence_release+0x19/0x30 [vgem] [117.004478] dma_fence_release+0xc1/0x3b0 [117.004480] ? dma_fence_release+0xa1/0x3b0 [117.004481] dma_fence_chain_release+0xe7/0x130 [117.004483] dma_fence_release+0xc1/0x3b0 [117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004485] dma_fence_chain_irq_work+0x59/0x80 [117.004487] irq_work_single+0x75/0xa0 [117.004490] irq_work_r ---truncated---
CVE-2025-40101 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST At the end of btrfs_load_block_group_zone_info() the first thing we do is to ensure that if the mapping type is not a SINGLE one and there is no RAID stripe tree, then we return early with an error. Doing that, though, prevents the code from running the last calls from this function which are about freeing memory allocated during its run. Hence, in this case, instead of returning early, we set the ret value and fall through the rest of the cleanup code.
CVE-2025-40100 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: do not assert we found block group item when creating free space tree Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---
CVE-2025-68758 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: backlight: led-bl: Add devlink to supplier LEDs LED Backlight is a consumer of one or multiple LED class devices, but devlink is currently unable to create correct supplier-producer links when the supplier is a class device. It creates instead a link where the supplier is the parent of the expected device. One consequence is that removal order is not correctly enforced. Issues happen for example with the following sections in a device tree overlay: // An LED driver chip pca9632@62 { compatible = "nxp,pca9632"; reg = <0x62>; // ... addon_led_pwm: led-pwm@3 { reg = <3>; label = "addon:led:pwm"; }; }; backlight-addon { compatible = "led-backlight"; leds = <&addon_led_pwm>; brightness-levels = <255>; default-brightness-level = <255>; }; In this example, the devlink should be created between the backlight-addon (consumer) and the pca9632@62 (supplier). Instead it is created between the backlight-addon (consumer) and the parent of the pca9632@62, which is typically the I2C bus adapter. On removal of the above overlay, the LED driver can be removed before the backlight device, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... Call trace: led_put+0xe0/0x140 devm_led_release+0x6c/0x98 Another way to reproduce the bug without any device tree overlays is unbinding the LED class device (pca9632@62) before unbinding the consumer (backlight-addon): echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind Fix by adding a devlink between the consuming led-backlight device and the supplying LED device, as other drivers and subsystems do as well.
CVE-2025-68759 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring() In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA allocations in a loop. When an allocation fails, the previously successful allocations are not freed on exit. Fix that by jumping to err_free_rings label on error, which calls rtl8180_free_rx_ring() to free the allocations. Remove the free of rx_ring in rtl8180_init_rx_ring() error path, and set the freed priv->rx_buf entry to null, to avoid double free.
CVE-2025-68760 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show In iommu_mmio_write(), it validates the user-provided offset with the check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`. This assumes a 4-byte access. However, the corresponding show handler, iommu_mmio_show(), uses readq() to perform an 8-byte (64-bit) read. If a user provides an offset equal to `mmio_phys_end - 4`, the check passes, and will lead to a 4-byte out-of-bounds read. Fix this by adjusting the boundary check to use sizeof(u64), which corresponds to the size of the readq() operation.