Export limit exceeded: 430479 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 30551 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26719 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-23225 1 Linux 1 Linux Kernel 2026-04-15 7.8 High
In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Don't assume CID is CPU owned on mode switch Shinichiro reported a KASAN UAF, which is actually an out of bounds access in the MMCID management code. CPU0 CPU1 T1 runs in userspace T0: fork(T4) -> Switch to per CPU CID mode fixup() set MM_CID_TRANSIT on T1/CPU1 T4 exit() T3 exit() T2 exit() T1 exit() switch to per task mode ---> Out of bounds access. As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in the task and drops the CID, but it does not touch the per CPU storage. That's functionally correct because a CID is only owned by the CPU when the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag. Now sched_mm_cid_exit() assumes that the CID is CPU owned because the prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the not set ONCPU bit and then invokes clear_bit() with an insanely large bit number because TRANSIT is set (bit 29). Prevent that by actually validating that the CID is CPU owned in mm_drop_cid_on_cpu().
CVE-2026-23233 1 Linux 1 Linux Kernel 2026-04-15 7.8 High
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile.
CVE-2026-23234 1 Linux 1 Linux Kernel 2026-04-15 7.8 High
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.
CVE-2026-23235 1 Linux 1 Linux Kernel 2026-04-15 7.1 High
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation.
CVE-2026-5877 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 8.8 High
Use after free in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5878 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 4.3 Medium
Incorrect security UI in Blink in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5880 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 4.3 Medium
Insufficient policy enforcement in browser UI in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to spoof the contents of the Omnibox (URL bar) via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5881 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 6.5 Medium
Policy bypass in LocalNetworkAccess in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5882 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 4.3 Medium
Incorrect security UI in Fullscreen in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5892 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 6.6 Medium
Insufficient policy enforcement in PWAs in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to install a PWA without user consent via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-5894 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 4.3 Medium
Inappropriate implementation in PDF in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low)
CVE-2026-5896 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 6.1 Medium
Policy bypass in Audio in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to bypass sandbox download restrictions via a crafted HTML page. (Chromium security severity: Low)
CVE-2026-5907 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-15 8.1 High
Insufficient data validation in Media in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform an out of bounds memory read via a crafted video file. (Chromium security severity: Low)
CVE-2026-39860 2 Linux, Nixos 2 Linux Kernel, Nix 2026-04-15 9 Critical
Nix is a package manager for Linux and other Unix systems. A bug in the fix for CVE-2024-27297 allowed for arbitrary overwrites of files writable by the Nix process orchestrating the builds (typically the Nix daemon running as root in multi-user installations) by following symlinks during fixed-output derivation output registration. This affects sandboxed Linux builds - sandboxed macOS builds are unaffected. The location of the temporary output used for the output copy was located inside the build chroot. A symlink, pointing to an arbitrary location in the filesystem, could be created by the derivation builder at that path. During output registration, the Nix process (running in the host mount namespace) would follow that symlink and overwrite the destination with the derivation's output contents. In multi-user installations, this allows all users able to submit builds to the Nix daemon (allowed-users - defaulting to all users) to gain root privileges by modifying sensitive files. This vulnerability is fixed in 2.34.5, 2.33.4, 2.32.7, 2.31.4, 2.30.4, 2.29.3, and 2.28.6.
CVE-2025-71140 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Use spinlock for context list protection lock Previously a mutex was added to protect the encoder and decoder context lists from unexpected changes originating from the SCP IP block, causing the context pointer to go invalid, resulting in a NULL pointer dereference in the IPI handler. Turns out on the MT8173, the VPU IPI handler is called from hard IRQ context. This causes a big warning from the scheduler. This was first reported downstream on the ChromeOS kernels, but is also reproducible on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though the actual capture format is not supported, the affected code paths are triggered. Since this lock just protects the context list and operations on it are very fast, it should be OK to switch to a spinlock.
CVE-2025-68322 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: parisc: Avoid crash due to unaligned access in unwinder Guenter Roeck reported this kernel crash on his emulated B160L machine: Starting network: udhcpc: started, v1.36.1 Backtrace: [<104320d4>] unwind_once+0x1c/0x5c [<10434a00>] walk_stackframe.isra.0+0x74/0xb8 [<10434a6c>] arch_stack_walk+0x28/0x38 [<104e5efc>] stack_trace_save+0x48/0x5c [<105d1bdc>] set_track_prepare+0x44/0x6c [<105d9c80>] ___slab_alloc+0xfc4/0x1024 [<105d9d38>] __slab_alloc.isra.0+0x58/0x90 [<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0 [<105b8e54>] __anon_vma_prepare+0x60/0x280 [<105a823c>] __vmf_anon_prepare+0x68/0x94 [<105a8b34>] do_wp_page+0x8cc/0xf10 [<105aad88>] handle_mm_fault+0x6c0/0xf08 [<10425568>] do_page_fault+0x110/0x440 [<10427938>] handle_interruption+0x184/0x748 [<11178398>] schedule+0x4c/0x190 BUG: spinlock recursion on CPU#0, ifconfig/2420 lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0 While creating the stack trace, the unwinder uses the stack pointer to guess the previous frame to read the previous stack pointer from memory. The crash happens, because the unwinder tries to read from unaligned memory and as such triggers the unalignment trap handler which then leads to the spinlock recursion and finally to a deadlock. Fix it by checking the alignment before accessing the memory.
CVE-2025-68216 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/
CVE-2025-68205 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver After restructuring and splitting the HDMI codec driver code, each HDMI codec driver contains the own build_controls and build_pcms ops. A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both build_controls and build_pcms are swapped. Unfortunately both callbacks have the very same form, and the compiler didn't complain it, either. This resulted in a NULL dereference because the PCM instance hasn't been initialized at calling the build_controls callback. Fix it by passing the proper entries.
CVE-2025-68204 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: scmi: Fix genpd leak on provider registration failure If of_genpd_add_provider_onecell() fails during probe, the previously created generic power domains are not removed, leading to a memory leak and potential kernel crash later in genpd_debug_add(). Add proper error handling to unwind the initialized domains before returning from probe to ensure all resources are correctly released on failure. Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20
CVE-2025-68199 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext When alloc_slab_obj_exts() fails and then later succeeds in allocating a slab extension vector, it calls handle_failed_objexts_alloc() to mark all objects in the vector as empty. As a result all objects in this slab (slabA) will have their extensions set to CODETAG_EMPTY. Later on if this slabA is used to allocate a slabobj_ext vector for another slab (slabB), we end up with the slabB->obj_exts pointing to a slabobj_ext vector that itself has a non-NULL slabobj_ext equal to CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to free slabB->obj_exts vector. free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will generate a warning because it expects slabobj_ext vectors to have a NULL obj_ext, not CODETAG_EMPTY. Modify mark_objexts_empty() to skip the warning and setting the obj_ext value if it's already set to CODETAG_EMPTY. To quickly detect this WARN, I modified the code from WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1); We then obtained this message: [21630.898561] ------------[ cut here ]------------ [21630.898596] kernel BUG at mm/slub.c:2050! [21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1 vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi net_failover virtio_console failover virtio_mmio dm_mirror dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4 aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject] [21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump: loaded Tainted: G        W           6.18.0-rc1+ #74 PREEMPT(voluntary) [21630.910495] Tainted: [W]=WARN [21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [21630.912392] pc : __free_slab+0x228/0x250 [21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp : ffff8000a02f73e0 [21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27: ffff0000c0011c40 [21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24: ffff000102199b40 [21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21: ffff0000c0011c40 [21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18: 0000000000000000 [21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12: ffff70001405ee66 [21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 : ffff800080a295dc [21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 : 0000000000003000 [21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 : 0000000000000007 [21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 : 0000000000000001 [21630.921810] Call trace: [21630.922130]  __free_slab+0x228/0x250 (P) [21630.922669]  free_slab+0x38/0x118 [21630.923079]  free_to_partial_list+0x1d4/0x340 [21630.923591]  __slab_free+0x24c/0x348 [21630.924024]  ___cache_free+0xf0/0x110 [21630.924468]  qlist_free_all+0x78/0x130 [21630.924922]  kasan_quarantine_reduce+0x11 ---truncated---