| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: picoLCD: check for fb_deferred_io_init() error
fb_deferred_io_init() allocates deferred I/O state, populating
info->fbdefio_state, or leaving it NULL if an error occurs.
Currently picolcd_init_framebuffer() ignores its return value.
Therefore if an error arises in fb_deferred_io_init() (for instance, due
to an allocation failure) info->fbdefio_state is left NULL.
When the file is subsequently opened, fb_open() will dereference a NULL
pointer (calling fb_deferred_io_open()).
Fix this by checking for the error.
Also correct cleanup ordering - defio is initialised after the sysfs file,
so cleanup defio first. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: kovaplus: reject short button reports
The raw event callback runs before HID core validates and zero-pads the
report. It passes the buffer to helpers which inspect data[0] and read a
complete struct kovaplus_mouse_report_button for button reports. A
truncated report can therefore cause an out-of-bounds read.
Require enough data for the button report before calling either helper.
Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init
sequence") added the same kind of raw-event length validation to hid-asus. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup
hid_gos_cfg_remove() calls a mutex before canceling delayed work. That
delayed work function calls mcu_property_out(), which holds the same mutex.
Prevent deadlock my removing the mutex prior to stopping the work.
Additionally, since cancel_delayed_work has the potential to re-arm,
switch to disable_delayed_work. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go-s: Add suspend function and gate access under bool.
Currently a device can suspend while delayed work is pending or
executing. Cancel delayed work if it was pending and restart it if it
hasn't run yet. Gate access to show/store functions behind a bool to
prevent access prior to cfg_setup() being completed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read when padding the final compound response
Compound response handling pads the last response of a compound to an
8-byte boundary by growing the final iov and the RFC1002 length.
smb2_allocate_rsp_buf() allocates exactly response_sz. A command can
fill the response buffer to within 7 bytes of its end, for example a
QUERY_INFO whose output is bounded only by the space left. The padding
can then run past the allocation, and ksmbd_tcp_writev() reads those
bytes when it sends the response.
BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0
Call Trace:
_copy_from_iter+0x744/0x10e0
tcp_sendmsg_locked+0x2290/0x3f80
ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd]
Allocate room for the padding when the request is a compound, as
smb2_read() and smb2_read_pipe() do for their payloads. response_sz is
unchanged, so commands still fill only up to it, and kvzalloc() zeroes
the padding. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix invalid pointer dereference when get_inode_acl() fails
When get_inode_acl() fails, it returns an ERR_PTR(), but
ksmbd_acls_fattr() stored that pointer in smb_fattr without
checking for errors. Later callers then passed the error pointer
to security descriptor helpers or posix_acl_release(), resulting
in an invalid pointer dereference.
This was reproduced on an XFS-backed share when xfs_get_acl()
returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client
triggered the crash:
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd]
Call Trace:
smb2_query_info+0x40d/0x17c0 [ksmbd]
handle_ksmbd_work+0x1ca/0x770 [ksmbd]
Fix this by checking the return values from get_inode_acl() in
ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is
available, and propagate all other errors to the callers. Update
smb2_open() and smb2_get_info_sec() to handle these errors. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rebind completed CREATE replays without draining the old channel
A completed DurableHandleReqV2 CREATE can be replayed through another
channel while its original channel is exiting. The existing replay path
returns the open but leaves its connection and oplock references pointing
at the old channel. Its open count also stays on that channel, and a
later CLOSE through the surviving channel decrements the wrong counter.
After checking the owner, lease key and persistent flag, verify that an
active open is still published in the requesting session's file table.
Do this even when no oplock was granted, and before processing a consumed
replay. Do not read a borrowed opinfo session pointer for this check.
Keep a healthy original binding. If the original channel is exiting or
releasing, move the open and its own oplock references to the requesting
channel. Serialize this with CLOSE using the session file-table lock,
and with detach, reconnect and notification snapshots using m_lock.
The earlier lock index and lease-table changes make their lifetimes
independent of this connection change. No old-channel r_count wait is
needed, including when an unrelated request remains active there.
Account final close against fp->conn in one place, balance durable detach
and reconnect, and transfer the count with a replay binding change. A
final global lookup put may run after CLOSE has removed the volatile id;
unlink the open from the inode list on that final close as well.
A live completed CREATE replay may follow a break that lowered the
durable open's batch oplock. Apply the batch eligibility check only to
detached reconnects, while retaining the owner, lease key and persistent
flag checks for active replays. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: wake epoll on self-work queued to poll thread
When a thread pushes work to its own todo list, InnerThread::push_work()
returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four
call sites in thread.rs discard this return value. As a result, a
non-blocking BC_* write that enqueues work onto the calling thread's
todo list without also reading will not wake epoll. Check the return
value and call self.process.notify_poll(false) when
PushWorkRes::OkNotifyPoll is returned.
This is similar to commit 97830f3c3088 ("binder: signal epoll threads of
self-work"), but in C Binder pending thread work also prevented
subsequent process work from waking epoll, causing a permanent hang,
which is not the case in Rust Binder. This means that in practice, it
merely delays notifications rather than completely failing to send them. |
| install-artifact-from-github installs prebuilt native artifacts hosted by GitHub without compiling them locally. Prior to 1.7.0, bin/install-from-cache.js downloads a native .node artifact, allows RE2_DOWNLOAD_MIRROR to select a source, follows HTTP redirects including HTTPS-to-HTTP downgrades, and writes the decompressed response to the artifact path without cryptographic integrity verification before writing or loading it. An attacker who controls a configured mirror, replaces a release asset, or can modify plaintext transport can supply native code that executes when the consumer loads the artifact. Version 1.7.0 adds SHA-256 verification for default-GitHub-source downloads when the consuming package publishes an artifactHashes bag; configured mirrors and packages without a bag remain outside that verification. |
| Confused deputy in Grid in Google Chrome on on Android prior to 158.0.8127.36 allowed a remote attacker to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) |
| Use-after-free in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 160.0.1. |
| A maliciously crafted SBSAR file, when imported or loaded through the Substance in 3ds Max plugin in Autodesk 3ds Max, can trigger a Stack Overflow vulnerability. A malicious actor may leverage this vulnerability to cause an application crash. |
| A maliciously crafted SBSAR file, when imported or loaded through the Substance in 3ds Max plugin in Autodesk 3ds Max, can trigger an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause an application crash, data corruption, or potentially execute arbitrary code in the context of the current process. |
| A maliciously crafted SBSAR file, when imported or loaded through the Substance in 3ds Max plugin in Autodesk 3ds Max, can trigger an Out-of-Bounds Read (table-index lookup) vulnerability. A malicious actor may leverage this vulnerability to cause an application crash or potentially read sensitive data from the current process. |
| A maliciously crafted SBSAR file, when imported or loaded through the Substance in 3ds Max plugin in Autodesk 3ds Max, can trigger an Out-of-Bounds Read (unvalidated element begin-pointer) vulnerability. A malicious actor may leverage this vulnerability to cause an application crash or potentially read sensitive data from the current process. |
| Inline mitigations exists. |
| Mattermost Plugins versions <=12.-1 11.0.11 11.11.7 11.2.10.0 fail to check for a nil result after decoding the HTTP request body which allows an authenticated user to crash the Zoom plugin process, causing denial of service, via sending a JSON null body to the plugin's action endpoints. Mattermost Advisory ID: MMSA-2026-00722 |
| Mattermost Plugins versions <=12.-1 11.0.11 11.11.7 11.2.10.0 fail to verify that the caller can post in a run's channel when executing a checklist slash command which allows an authenticated run participant to post arbitrary messages into a private channel they are not a member of via the checklist item run endpoint. Mattermost Advisory ID: MMSA-2026-00730 |
| Mattermost Plugins versions <=12.-1 11.11.7 11.2.10 11.1.11.0 fail to enforce the GitLab project permission check for confidential issues when the project is publicly visible which allows an authenticated user with no GitLab membership in the project to obtain the contents of confidential issues, including title, description, author, and URL via subscribing a channel to the parent public GitLab group with the confidential_issues feature and waiting for a confidential issue webhook event. Mattermost Advisory ID: MMSA-2026-00738 |
| Improper neutralization of special elements in data query logic (Cypher injection) in the fulltext and vector index query generator of the sharded property database in Neo4j Enterprise Edition 2026.07.0 before 2026.10.0 allows an authenticated user holding ACCESS, CREATE INDEX and NAME MANAGEMENT privileges to inject Cypher that is accepted for execution on a property shard, in the session of any user who later queries the index, via a crafted index name containing a single quote. The impact is bounded by the privileges of the querying user. |