| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to improper validation of the length field during memory reallocation. |
| MOOS core-moos through 10.4.0 contains a denial of service vulnerability in the MOOSDB HTTP server that creates unbounded connections and threads without limits. Attackers can open many connections and send endless header data to exhaust server threads and memory, causing service unavailability. |
| MOOS-IvP pMarineViewer through 24.8.1 fails to limit the number of tracked node identities from NODE_REPORT messages, allowing attackers to exhaust memory by supplying unbounded distinct node names. Attackers can publish crafted NODE_REPORT data to cause memory exhaustion and stall the operator display without authentication. |
| MOOS-IvP uFldShoreBroker through 24.8.1 fails to limit the number of claimed communities stored in parallel vectors within ShoreBroker::handleMailNodePing(). A single publisher can supply unbounded distinct community names to grow retained state and per-pass work without limit, causing memory exhaustion and performance degradation. |
| MOOS-IvP pRealm through version 24.8.1 accepts unbounded REALMCAST_REQ subscriptions without validating duration or variable list limits. Attackers can register long-lived pipeways with many variables to cause pRealm to generate excessive output indefinitely, exhausting system resources. |
| An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the "chained" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable "links" in this "decompression chain" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a "malloc bomb", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors. |
| Improper neutralization of special elements used in a command ('command injection') in Microsoft 365 Copilot's Business Chat allows an unauthorized attacker to disclose information over a network. |
| Ai command injection in Microsoft Copilot allows an unauthorized attacker to disclose information over a network. |
| Unspecified vulnerability in Oracle Java SE 6u101, 7u85, and 8u60; Java SE Embedded 8u51; and JRockit R28.3.7 allows remote attackers to affect availability via vectors related to JAXP, a different vulnerability than CVE-2015-4803 and CVE-2015-4911. |
| Issue summary: Processing some specially crafted ASN.1 object identifiers or
data containing them may be very slow.
Impact summary: Applications that use OBJ_obj2txt() directly, or use any of
the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message
size limit may experience notable to very long delays when processing those
messages, which may lead to a Denial of Service.
An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers -
most of which have no size limit. OBJ_obj2txt() may be used to translate
an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL
type ASN1_OBJECT) to its canonical numeric text form, which are the
sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by
periods.
When one of the sub-identifiers in the OBJECT IDENTIFIER is very large
(these are sizes that are seen as absurdly large, taking up tens or hundreds
of KiBs), the translation to a decimal number in text may take a very long
time. The time complexity is O(n^2) with 'n' being the size of the
sub-identifiers in bytes (*).
With OpenSSL 3.0, support to fetch cryptographic algorithms using names /
identifiers in string form was introduced. This includes using OBJECT
IDENTIFIERs in canonical numeric text form as identifiers for fetching
algorithms.
Such OBJECT IDENTIFIERs may be received through the ASN.1 structure
AlgorithmIdentifier, which is commonly used in multiple protocols to specify
what cryptographic algorithm should be used to sign or verify, encrypt or
decrypt, or digest passed data.
Applications that call OBJ_obj2txt() directly with untrusted data are
affected, with any version of OpenSSL. If the use is for the mere purpose
of display, the severity is considered low.
In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME,
CMS, CMP/CRMF or TS. It also impacts anything that processes X.509
certificates, including simple things like verifying its signature.
The impact on TLS is relatively low, because all versions of OpenSSL have a
100KiB limit on the peer's certificate chain. Additionally, this only
impacts clients, or servers that have explicitly enabled client
authentication.
In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects,
such as X.509 certificates. This is assumed to not happen in such a way
that it would cause a Denial of Service, so these versions are considered
not affected by this issue in such a way that it would be cause for concern,
and the severity is therefore considered low. |
| The Bluetooth Mesh Access layer delayable-message machinery in subsys/bluetooth/mesh/delayable_msg.c manages a static pool of CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_COUNT message contexts (default 4) threaded onto a free_ctx or busy_ctx list. release_delayable_msg_ctx() returned a context to free_ctx only when sys_slist_find_and_remove() found it on busy_ctx. The chunk-exhaustion error path in bt_mesh_delayable_msg_manage() releases a context that was already popped off free_ctx but not yet inserted on busy_ctx, so the context was appended to neither list and was permanently lost from the pool. Because bt_mesh_delayable_msg_init() runs only once from bt_mesh_init(), and node reset/suspend only drain busy_ctx, the loss survives unprovision, re-provision and suspend/resume — it is cleared only by a reboot.
The error path is reached when the chunk pool (CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CHUNK_COUNT, default 40 chunks) is short of the chunks a new delayed message needs and the oldest pending message cannot be flushed because bt_mesh_access_send() returns -EBUSY or -ENOBUFS (all segmented-TX contexts busy, or advertising/segment buffers exhausted). A peer that is provisioned into the mesh network — holding a valid NetKey plus an AppKey or DevKey bound to a server model — can drive both conditions by flooding the victim with requests that elicit segmented responses while withholding the Segment Acknowledgment, which keeps the transmit contexts occupied while queued responses hold the chunk pool. Each further request that arrives in that window leaks one context.
Once the pool is drained, bt_mesh_delayable_msg_manage() returns -ENOMEM for every subsequent send and bt_mesh_model_send() propagates that error with no fallback to an immediate transmit. Since CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED are both enabled by default, ctx->rnd_delay is set for every received access message, so all replies from Configuration Server, Health Server and application server models are silently dropped. The node keeps receiving and processing traffic but never answers, a persistent denial of service until the device is restarted. There is no memory corruption, information disclosure or integrity impact; releases before the fix compute the chunk count from the transmit buffer capacity rather than its payload length, making chunk-pool starvation — and therefore the leak — considerably easier to provoke. |
| The Model Context Protocol Java SDK is the official Java SDK for Model Context Protocol servers and clients. From version 0.8.0 through 0.12.0 in the io.modelcontextprotocol.sdk:mcp artifact, from 0.13.0 through 0.18.3 and 1.0.0 through 1.1.3 in io.modelcontextprotocol.sdk:mcp-core, and from mcp-core 2.0.0-M1 through 2.0.0, the Servlet-based SSE, Streamable HTTP, and Stateless server transports read an HTTP request body into memory without enforcing a maximum size. An unauthenticated remote client able to reach an affected transport can stream an arbitrarily large POST body, including with chunked transfer encoding, until the Java process exhausts its heap and becomes unavailable. Authentication, Origin or Host validation, or an upstream request-size limit can reject the request before the vulnerable read. The maintained mcp-core lines are fixed in versions 0.18.4, 1.1.4, and 2.0.1. |
| An input validation vulnerability exists in the security certificate management component of the Brocade Fabric OS administrative management API. When processing certificate management operations, user-supplied certificate identifiers are handled without adequate sanitization prior to execution in external system routines. An authenticated attacker with privileges to perform certificate deletion requests can leverage this flaw to execute arbitrary system commands with the privileges of the underlying management daemon. This vulnerability affects Fabric OS versions before 9.2.2d and 10.0.0 through 10.0.0a1. |
| SGLang through 0.5.21 contains a resource budget bypass vulnerability that allows remote attackers to override GLM-V video processing limits by supplying fps, max_frames, max_tokens_per_frame and max_image_tokens in the video_url object. Attackers can set these values arbitrarily high so glm4v.py decodes every frame of high-resolution video at full size, exhausting worker memory and denying service. |
| LogicalDOC Community Edition through 9.3 contains an unauthenticated file upload vulnerability in the UploadServlet that allows remote attackers to write files to disk without a session. Attackers can repeatedly send multipart requests with unlimited file parts to /upload, persisting files in uncleaned temporary directories and exhausting server disk space. |
| A security flaw has been discovered in Linksys E1700 1.0.0.4.003. Impacted is the function addStaticRoute of the file /goform/addStaticRoute of the component Static Route Handler. Performing a manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Improper neutralization of special elements used in a command ('command injection') in Visual Studio Code allows an unauthorized attacker to execute code over a network. |
| Hatchet through 0.110.5 contains an allocation of resources without limits vulnerability that allows unauthenticated attackers to exhaust memory via the SNS ingestion endpoint. Attackers can send arbitrarily large or concurrent request bodies to POST /api/v1/sns/{tenant}/{event} with any UUID, which the SnsUpdate handler buffers before signature verification, degrading availability. |