| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent UAF caused by non-leader exec() race
Wongi and Jungwoo decoded and reported a non-leader exec() related race
which can result in an UAF:
sys_timer_delete() exec()
posix_cpu_timer_del()
// Observes old leader
p = pid_task(pid, pid_type); de_thread()
switch_leader();
release_task(old_leader)
__exit_signal(old_leader)
sighand = lock(old_leader, sighand);
posix_cpu_timers*_exit();
sighand = lock_task_sighand(p) unhash_task(old_leader);
sh = lock(p, sighand) old_leader->sighand = NULL;
unlock(sighand);
(p->sighand == NULL)
unlock(sh)
return NULL;
// Returns without action
if(!sighand)
return 0;
free_posix_timer();
This is "harmless" unless the deleted timer was armed and enqueued in
p->signal because on exec() a TGID targeted timer is inherited.
As sys_timer_delete() freed the underlying posix timer object
run_posix_cpu_timers() or any timerqueue related add/delete operations on
other timers will access the freed object's timerqueue node, which results
in an UAF.
There is a similar problem vs. posix_cpu_timer_set(). For regular posix
timers it just transiently returns -ESRCH to user space, but for the use
case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is
allocated on the stack.
Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops
to expire.
While debating solutions Frederic pointed out another problem:
posix_cpu_timer_del(tmr)
__exit_signal(p)
posix_cpu_timers*_exit(p);
unhash_task(p);
p->sighand = NULL;
sh = lock_task_sighand(p)
sighand = p->sighand;
if (!sighand)
return NULL;
lock(sighand);
if (!sh)
WARN_ON_ONCE(timer_queued(tmr));
On weakly ordered architectures it is not guaranteed that
posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()
when p->sighand is observed as NULL, which means the WARN() can be a false
positive.
Solve these issues by:
1) Changing the store in __exit_signal() to smp_store_release().
2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path
of lock_task_sighand().
3) Creating a helper function for looking up the task and locking sighand
which does not return when sighand == NULL. Instead it retries the
task lookup and only if that fails it gives up.
4) Using that helper in the three affected functions.
#1/#2 ensures that the reader side which observes sighand == NULL also
observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()
and the ones in unhash_task().
#3 ensures that the above described non-leader exec() situation is handled
gracefully. When the task lookup returns the old leader, but sighand ==
NULL then it retries. In the non-leader exec() case the subsequent task
lookup will observe the new leader due to #1/#2. In normal exit() scenarios
the subsequent lookup fails.
When the task lookup fails, the function also checks whether the timer is
still enqueued and issues a warning if that's the case. Unfortunately there
is nothing which can be done about it, but as the task is already not
longer visible the timer should not be accessed anymore. This check also
requires memory ordering, which is not provided when the first lookup
fails. To achieve that the check is preceeded by a smp_rmb() which pairs
with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that
the stores in posix_cpu_timers*_exit() are visible.
The history of the non-leader exec() issue goes back to the early days of
posix CPU timers, which stored a pointer to the group leader task in the
timer. That obviously fails when a non-leader exec() switches the leader.
commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems
with mt exec") added a temporary workaround for that in 2010 which surv
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Check for invalid/obsolete root *after* making MMU pages available
Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.
Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.
Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately. |
| Race condition in Extensions in Google Chrome on on Mac prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to obtain sensitive information via crafted network traffic. (Chromium security severity: High) |
| Divide By Zero vulnerability in davisking dlib allows
remote attackers to cause a denial of service via a crafted file.
.This issue affects dlib: before <19.24.7. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-blkback: Avoid UAF when reading I/O statistics
Reading I/O statistics via sysfs concurrently with tearing down a
frontend device might result in UAF or a NULL dereference, as the
reading of the statistics data is not synchronized with freeing the
data.
Use a rwlock for synchronizing.
This is XSA-528 / CVE-2026-100082 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Automattic WooCommerce woocommerce allows Leveraging Race Conditions.This issue affects WooCommerce: from 11.0.0 through 11.2.2. |
| Description
When launching a Docker or OCI worker, the setuid-root `worker-launcher` first changes ownership of the
entire worker directory to the untrusted topology user, and only afterwards reads and acts on the command
file that the supervisor wrote into that same directory. The file is opened without `O_NOFOLLOW` and without
re-verifying its owner, so between the ownership change and the read the tenant can replace its contents.
For the Docker path the parsed command is executed with real uid 0, and the command sanitiser is not a
privilege boundary: it admits `-v` with an arbitrary source, `--device`, `--cap-add`, `--security-opt`,
`--user` and `--net`, and copies positional arguments through verbatim. A rewritten file therefore yields an
attacker-authored, root-equivalent container invocation with the host filesystem available.
For the OCI path the same rewrite window applies, and mount validation is structural only, with no
source or destination allow-list, so arbitrary host paths can be bind-mounted read-write into the
container. The `username` field of the command file is likewise attacker-settable and is checked only
against non-root and minimum-uid rules, permitting execution as another tenant's uid.
Mitigation
Upgrade to 3.1.0, where the command file is validated before the ownership change and re-verified on open,
and where mount sources and destinations are constrained by configuration.
Users who cannot upgrade immediately should disable Docker and OCI worker isolation, or restrict topology
submission on affected supervisors to trusted principals. Note that the launcher must be rebuilt and
reinstalled after upgrading.
Credit
The ASF -- found using Claude agents to study the security of open-source projects, validated and reported by Apache Storm. |
| Description
The setuid-root `worker-launcher` binary adjusts ownership and permissions of worker directories by walking
the tree with FTS and calling `lchown` and `chmod` on each entry's full pathname while running with an
effective uid of 0. Both syscalls re-resolve the path at the time of the call, after FTS has classified the
entry, and the trees being walked are owned and writable by the untrusted topology user.
A tenant running code on a supervisor node could therefore replace an intermediate directory component with
a symbolic link between classification and the privileged operation, redirecting the root-owned `lchown` or
`chmod` at an arbitrary file on the host. The operation is repeatable at will, since crashing a worker
forces a relaunch and blob updates re-run the walk, so a failed attempt costs the attacker nothing.
This crosses the boundary that `supervisor.run.worker.as.user` and container isolation are intended to
enforce. It is the same defect class as the Hadoop container-executor issues from which this code derives.
Mitigation
Upgrade to 3.1.0, where the privileged walk operates on file descriptors it has already stat'd rather than
on pathnames re-resolved at call time.
Users who cannot upgrade immediately should not run untrusted topology code on supervisors configured with
`supervisor.run.worker.as.user`, since the launcher is the boundary being crossed. Note that the launcher
must be rebuilt and reinstalled after upgrading; replacing the Java artifacts alone is not sufficient.
Credit
The ASF -- found using Claude agents to study the security of open-source projects, validated and reported by Apache Storm. |
| NocoDB before 2026.08.1 contains a race condition vulnerability in users.service.ts that allows holders of a valid reset token to perform multiple password changes by sending concurrent reset requests. Attackers can exploit the window created by slow bcrypt hashing before the token is cleared to overwrite the owner's new password and lock them out. |
| NocoDB before 2026.08.0 contains a race condition in refresh-token rotation that allows attackers to reuse tokens because UserRefreshToken.ts never checks the affected-row count. Attackers holding a captured refresh token can present it concurrently with the legitimate user to obtain a valid authenticated session, and no reuse event is recorded. |
| NocoDB before 2026.06.2 contains a race condition vulnerability in oauth-token.service.ts that allows attackers to reuse a refresh token by presenting it concurrently during non-atomic rotation. Attackers holding a captured refresh token can race the legitimate client to obtain their own access and refresh tokens, retaining scoped access without triggering reuse detection. |
| n8n before 2.46.1 contains an arbitrary file read vulnerability that allows authenticated members to read server files by supplying absolute paths to the Browser Use browser_upload tool. Attackers with a connected remote browser session can have Playwright read files such as instance configuration from the n8n server and retrieve their contents from the page. |
| Wasmtime's wasmtime-wasi crate 48.0.0 before 48.0.8, 49.0.0 before 49.0.5, and 50.0.0 before 50.0.1 contains a time-of-check/time-of-use race in the wasip3 wasi:sockets udp-socket host implementation that lets guests bypass socket_addr_check send restrictions. A malicious guest can race udp-socket.send against udp-socket.connect to deliver attacker-controlled datagrams to addresses the policy permits only for receiving. |
| OpenMage magento-lts before 20.19.0 and 21.0.0-beta1 before 21.0.0-beta3 contains a race condition in shopping cart price rule usage limits, because Mage_SalesRule_Model_Validator checks coupon limits without locking and the usage counters are later incremented non-atomically. Unauthenticated attackers, including guest shoppers, can submit concurrent checkouts to redeem a limited coupon more times than its cap allows. |
| Paaster is a pastebin application. Prior to version 3.3.0, Paaster's "view once" (burn-after-reading) paste mode can be bypassed with concurrent requests. The check that's supposed to enforce single-use is a plain read followed by a separate write, with no atomicity, so multiple simultaneous requests can all see the paste as "not yet read" and all successfully retrieve it. This issue has been patched in version 3.3.0. |
| Zipline before 4.8.0 contains a race condition vulnerability in src/server/routes/raw/[id].ts that allows remote attackers to bypass file maxViews limits through non-atomic view counting. Attackers holding a file link can send parallel requests that read the same pre-increment count, viewing view-limited or delete-on-max-views files beyond their limit. |
| Dell Display and Peripheral Manager (DDPM Windows), versions prior to 2.4.0.17, contain a Time-of-check Time-of-use (TOCTOU) Condition vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution. |
| A time-of-check to time-of-use (TOCTOU) race condition in the AMD SEV Secure Encrypted Virtualization (SEV) firmware could allow an attacker with administrative privileges to bypass security checks on scatter lists, potentially resulting in loss of guest integrity. |