| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: A malicious remote peer may flood the local QUIC
stack with NEW_CONNECTION_ID frames by avoiding a limit check on
how many connection IDs the remote QUIC stack can use.
Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame
for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID
frame is dispatched via the Control Frame Queue (CFQ). If the remote
peer also withholds ACKs, then it can force the local stack
to allocate ~400MB (depending on ACK delay).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism
by which a remote peer can notify the local QUIC stack to change the
destination connection ID (a.k.a. CID) the local stack uses to
identify the connection at the remote peer. Each CID is associated
with a sequence number. The sequence number is transmitted
in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID
which is being either associated with a connection or retired.
The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know
a new CID is being associated with an existing connection. The
NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the
retire-prior-to number. The retire-prior-to identifies existing
CIDs that are to be retired. The local QUIC stack must send a
RETIRE_CONNECTION_ID for every destination CID whose sequence number
is less than retire-prior-to. The CID becomes retired after the
local stack receives an ACK for its RETIRE_CONNECTION_ID frame.
Although the OpenSSL QUIC stack supports at most one destination CID
for every connection, it can be tricked into processing more than
one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC
stack currently retires the destination CID as soon as it receives
the NEW_CONNECTION_ID, while in fact the destination CID must
be retired after an ACK for the RETIRE_CONNECTION_ID frame is received.
Correcting the flawed logic also fixes the backlog growth.
[1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.
Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.
CWE: CWE-416: Use After Free
Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.
Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.
FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.
OpenSSL 4.0 is vulnerable to this issue.
OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.
The fix has been developed by Bob Beck.
-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck |
| Issue summary: OpenSSL QUIC stack does not enforce connection
level flow control for streams. Remote peers may send more bytes
as long as they fit within the stream flow control limits.
Impact summary: A malicious remote peer may exploit the lack of connection
flow control for streams to make the QUIC stack receive ~100MB of memory
instead of 768 KiB (default flow control window size).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The local QUIC stack advertises two flow control limits
to its remote peer: stream flow control limit and connection flow
control limit. The remote peer must follow both limits when transmitting
stream data.
Whenever the local QUIC stack receives a stream frame, it validates
that the size of the received stream frame stays within flow control limits.
If either limit is exceeded (stream level or connection level), then
the QUIC stack must close the connection with a flow control error.
The vulnerable OpenSSL QUIC stack enforces the stream-level but not
the connection-level limit. To exploit the issue, three conditions must be met:
- the remote peer opens several streams
- each stream must stay within the stream-level flow control limit
- there must be no zero-offset byte sent on any of the streams
(to prevent the vulnerable QUIC stack from consuming data).
By meeting the conditions above, the remote peer may make the local stack
allocate 2 x MAX_STREAMS x (stream flow control limit) bytes
of memory. MAX_STREAMS defaults to 100, and the limit applies to both
bidirectional and unidirectional streams, making it 200 in total. The default
flow control window for a stream is 512kB. The remote peer may
force the vulnerable QUIC stack to allocate 100MB of heap per connection.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a
connection to a different SSL_CTX part way through a handshake may access
memory beyond the end of an internal array if the replacement context knows
about more provider signature algorithms than the context the connection was
created from. Applications which never call SSL_set_SSL_CTX() are not
affected.
Impact summary: A remote peer may be able to cause a small out-of-bounds
read, and in some circumstances a fixed-value out-of-bounds write, on the
server heap. This may lead to a Denial of Service.
CWE: CWE-787: Out-of-bounds Write
Description: A TLS connection records how many certificate slots it has
when it is created, taken from the SSL_CTX that created it: the built-in
certificate types plus one slot for each provider TLS-SIGALG entry that
context was aware of. That count sizes an internal array of per-slot
certificate validity flags.
An application may replace a connection's SSL_CTX part way through the
handshake by calling SSL_set_SSL_CTX(), most commonly from a servername
callback in order to serve a different virtual host. Doing so did not
refresh the recorded count. A provider signature algorithm's slot index is
its position in the list of whichever context resolves it, so if the
replacement context is aware of more of them than the original, an
algorithm offered by the peer can resolve to an index beyond the end of the
array. Processing the peer's signature algorithms then reads one four byte
word past the end for each such algorithm and, where the word read is zero,
writes a fixed value over it. A peer offering many of them can corrupt heap
metadata and abort the process.
Only provider signature algorithms which occupy one of the excess slots,
and which the server also has configured, have this effect. Codepoints the
replacement context does not recognise are discarded without being resolved
to a slot, and provider signature algorithms are usable only from TLS 1.3.
The two contexts must therefore be aware of different numbers of provider
signature algorithms, which requires separate library contexts, a provider
loaded between the two being created, or providers which differ in what
they advertise - in 4.0, for example, the default provider advertises SM2
where the FIPS provider does not. A deployment meeting the condition is
also unable to negotiate the affected algorithms with legitimate clients,
since the same stale count hides the corresponding certificates, so the
misconfiguration is likely to be noticed. For that reason, and because the
configuration is not the default, this issue has been assessed as Low
severity.
FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: A non-constant-time optimized implementation of scalar
point multiplication is used for SM2 private key operations on ARM64 and
RISC-V platforms.
Impact summary: An attacker able to measure the time taken by, or to observe
the cache-line access pattern of SM2 signing or decryption on an affected
platform can learn information about the secret scalar.
CWE: CWE-208: Observable Timing Discrepancy
Description: On ARM64 and RISC-V processors, the SM2 curve uses an optimized
scalar multiplication implementation whose conditional branches and table
look ups are chosen according to the bits of the secret scalar. The execution
time and the cache-access pattern therefore depend on the long-term private
key (during SM2 decryption) or the per-signature nonce (during SM2 signature
generation), forming a timing and cache side-channel.
FIPS Impact: no
SM2 is not a FIPS algorithm and the optimized SM2 implementation is not part
of the FIPS module.
OpenSSL 4.0, 3.6, 3.5 and 3.4 are vulnerable to this issue on AArch64 and
RISC-V.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.5.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.9.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.8.
This issue was reported on 2 May 2026 by Abhinav Agarwal.
It was independently reported on 6 June 2026 by Feng Xue.
The fix was developed by Igor Ustinov.
-- cut (non-publishing metadata for internal use) --
Reported by: Abhinav Agarwal, Feng Xue
Fixed by: Igor Ustinov |
| Issue summary: QUIC process may keep memory for QUIC packet
buffer for much longer period than necessary.
Impact summary: Remote peer can exploit this vulnerability
by sending maliciously crafted packets, making the local
QUIC stack to keep the memory for packet buffers allocated.
The time for which the memory remains allocated is entirely
under the control of the potentially malicious remote peer.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: To save copy operation from the packet buffer to the
stream reassemble buffer the QUIC stack leaves the stream data
on the packet buffer waiting to be copied to a buffer provided
by the local receiving application. The QUIC stack releases
a reference to the packet buffer only after the data are copied
to the application buffer. This design is more efficient for
legitimate data transfers but enables an attacker to allocate a lot
more memory than actually required by the data kept in the receiving
stream buffer.
To mitigate the vulnerability, the QUIC stack now calculates
and monitors memory overhead for every stream. The memory overhead
for a single stream frame is calculated as a difference between the
size of the whole packet that carries the stream frame and the size
of the stream frame itself. The memory overhead for a single stream
frame is added to the total (cumulative) memory overhead QUIC stack
keeps for each stream. Once the cumulative memory overhead exceeds
64kB, the QUIC stack moves the stream frame data from the packet
buffer to the stream buffer, starting with the next packet received.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: The QUIC stream reassembly algorithm performance deteriorates
progressively as packets are arriving out of order. The worst case has
a quadratic complexity proportional to the number of stream frames kept in
the buffer for the received stream data.
Impact summary: A remote QUIC peer that completes the handshake can create
a connection-scoped CPU pressure and potentially a Denial of Service using
compliant STREAM frames inside the advertised receive window, with low
attacker bandwidth.
CWE: CWE-407: Inefficient Algorithmic Complexity
Description: OpenSSL manages received QUIC stream fragments using a
doubly-linked list. While it optimizes for append operations (at the end of
the list), it falls back to a head-to-tail linear search for any fragment
that does not immediately follow the current `tail`.
By manipulating the sequence of offsets, an attacker can force the server
to perform O(n^2) operations, consuming excessive CPU time for the
QUIC process.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: The OpenSSL QUIC server, when configured to not preform address
validation, can be forced to count incoming packets multiple times in its
unvalidated credit computation, leading to a violation of the RFC 9000
unvalidated connection amplification limit of 3 times the amount of data
received.
Impact summary: A remote attacker able to spoof packets to a server using the
OpenSSL QUIC implementation might use the server for an amplification of
a DDoS attack.
CWE: CWE-440: Expected Behavior Violation
Description: OpenSSL's QUIC stack, when operating as a server, enforces client
address validation (RFC 9000, Section 8), to confirm the peer address is not
used for a traffic amplification attack. If this feature is disabled on the
server, the QUIC stack limits the amount of server data that can be sent to 3
times the amount of data received from the peer address, until such time as the
TLS handshake is completed.
The OpenSSL QUIC server, when operating in non-validation mode, adds the
length of the whole datagram received to the unvalidated credit limit when
processing each QUIC packet in the datagram. A remote peer may,
after establishing a connection with an initial client hello frame, send a
subsequent datagram containing multiple QUIC packets, leading the server to
account the entire datagram length for each packet in the datagram, resulting
in the server believing that the peer has sent more data than it actually has,
thereby violating the 3x amplification limit mandated by the RFC.
FIPS impact: no
As the QUIC stack lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE. |
| Issue summary: QUIC server may double free QRX (QUIC record layer RX) object
when channel creation fails for initial packet.
Impact summary: Double free leads to heap corruption, which typically results in
termination of QUIC server process, leading to Denial of Service. There is so
far no evidence that this double free is exploitable for remote code execution,
thus it is considered highly improbable.
CWE: CWE-415: Double Free
Description: In order to validate initial packet, OpenSSL QUIC stack default
packet handler (port_default_packet_handler()) creates a so-called QRX object.
If the initial packet validates successfully with QRX object, the default packet
handler proceeds to channel (connection object) creation. The QRX object used
for packet validation is passed to port_bind_channel(), so it becomes part of
the newly created connection. If port_bind_channel() fails, then it also frees
the QRX object. Once port_bind_channel() returns, the port_default_packet_handler()
detects the failure and proceeds to the error branch, where the same QRX object is
freed for the second time.
The failure in port_bind_channel() function can be induced with a relatively
low effort by a malformed (non RFC 9000 compliant) INITIAL packet. If the packet
carries DCID (destination connection ID) which is shorter than 8 bytes, then
port_bind_channel() jumps to the error path after ossl_quic_lcidm_enrol_odcid()
detects that the DCID has invalid length.
FIPS impact: no
The FIPS module is not affected, as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: ChaCha20-Poly1305 and AES-OCB decryption with an empty
ciphertext can report success without verifying the supplied authentication
tag when the operation is finalized by calling the EVP_Cipher() function.
Impact summary: Applications calling EVP_Cipher() on an empty ciphertext and
expecting the call to check the AEAD tag may accept forged messages.
CWE: CWE-354 (Improper Validation of Integrity Check Value)
Description: The EVP_Cipher() API call for AEAD ciphers behaves like a one
shot encryption and decryption call. It also verifies the AEAD tag after the
decryption operation. However for AES-OCB and ChaCha20-Poly1305 ciphers
it skipped the AEAD tag verification when an empty ciphertext was passed to
the function. The callers of this function might believe that a successful
return indicates a valid AEAD tag for these ciphers, even when that has not
truly been validated in this case.
FIPS impact: no
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE
as the affected algorithms are not FIPS approved and thus not implemented
in the FIPS module. |
| Issue summary: OpenSSL CMP password based protection verification only
checks whether the protectionAlg parameter was not NULL and not its
ASN.1 type, before treating it as a PBMParameter. A crafted message can
contain a parameter of a different type, which is then dereferenced as an
invalid pointer.
Impact summary: A remote, unauthenticated attacker can crash an application
acting as a CMP server that accepts PBM-protected messages, or a CMP client
talking to a malicious or intercepted CMP server, resulting in a Denial of
Service.
CWE: CWE-476: NULL Pointer Dereference
Description: When verifying the password-based MAC protection of a CMP
message, OpenSSL library reads the protectionAlg algorithm parameter with
X509_ALGOR_get0(), which returns both the parameter type and its value
pointer. The value is then cast to an ASN1_STRING and treated as the
expected PBMParameter after only checking that pointer is not NULL. The
parameter type returned by X509_ALGOR_get0() was never consulted.
This happens during protection verification, before any MAC is computed, so
no knowledge of the PBM shared secret is required; the only precondition is
that PBM verification is reachable. On the server side this is reached from
OSSL_CMP_SRV_process_request() for any application that stands up a CMP
server accepting PBM-protected messages, and on the client side from CMP
response validation against a malicious or on-path (MITM) server. The
reliable consequence is a denial of service; there is no memory disclosure,
no controlled memory write, and no path to code execution. CMP is a
specialized feature that an application must explicitly enable.
FIPS impact: no
As the CMP code lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE. |
| Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly
sends ack-eliciting packets while not acknowledging ACK-only responses, the
QUIC stack can retain ACK-only packet metadata for the lifetime of the
connection.
Impact summary: A remote peer that can complete a QUIC handshake can
cause connection-scoped memory growth which may lead to Denial of Service
through memory exhaustion, especially with sustained traffic or many concurrent
QUIC connections.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: When the OpenSSL QUIC stack sends an ACK-only packet,
there is no requirement by the QUIC protocol that the peer will acknowledge
that ACK-only packet (i.e. it is itself not ack-eliciting). However, the OpenSSL
implementation stores the metadata about the ACK frames regardless.
In and of itself that's ok, but if a malicious peer establishes a connection, and
then drives the connection such that ACK-only packets are forced from the
OpenSSL implementation peer (i.e., by sending numerous PING frames),
and then withholding any subsequent acks for ack-eliciting data, like
legitimate data, said malicious peer can force inappropriate memory growth
on the OpenSSL peer, potentially leading to a Denial of Service.
The fix is to ensure that we account for the transmission of the ACK-only
packet in the packet histories high and low watermark without actually storing
the ACK-only packet metadata itself.
FIPS impact: no
The OpenSSL FIPS module is not affected as the QUIC code is
outside the FIPS module boundary. |
| Issue summary: The OpenSSL Certificate Management Protocol (CMP) caches
additional certificates (extraCerts) sent in a CMP message, but never expunges
them (for instance if they are invalid). If a server reuses an OSSL_CMP_CTX
frequently, this cache of extraCerts may grow unboundedly, and a malicious
client may flood a CMP server with requests driving this growth.
Impact summary: Users utilizing a CMP server that reuses a single OSSL_CMP_CTX
for the lifetime of a server process may observe unbounded memory growth in the
event a malicious client repeatedly sends requests containing unique extra
certificates, which may lead to OOM conditions.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: If a remote user sends CMP messages to a server with a list of
extraCerts and the message is rejected, the extraCerts from the message remains
in the server contexts untrusted certificate stack. This exposes servers with
long lived ctx objects to Denial of Service attacks in which an attacker sends
messages intending to be rejected with a large list of additional certificates
repeatedly, forcing the server to store them indefinitely.
The issue was fixed by removing the added extra certs if the message is
rejected, using the same method as when the context is configured to not do
caching at all.
FIPS impact: no
As the CMP code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| Issue summary: OpenSSL CMP response validation passed an unexpected response
sender distinguished name directly as the format string to `ERR_raise_data()`.
Impact summary: A malicious or intercepted CMP endpoint can crash a CMP client
that enforces an expected sender or uses a pinned server certificate whose
subject becomes the default expected sender.
CWE: CWE-134 (Use of Externally-Controlled Format String)
Description: When validating a received CMP message, ossl_cmp_msg_check_update()
converts the peer-supplied sender distinguished name with X509_NAME_oneline()
and passes it directly as the format argument to ERR_raise_data(). Percent
characters survive the conversion, so a sender DN such as "CN=%s%n" reaches
BIO_vsnprintf() as an attacker-controlled format string with no matching variadic
arguments. This path is only reached when the caller configures an expected
sender or pins a server certificate, which is the normal configuration for a
CMP client validating server responses.
Since the attacker controls the format string but none of the variadic
arguments, such specifiers as %s and %n dereference or write through unrelated
stack contents and crash the client. The reliable consequence is a denial of
service, when the response comes from a malicious or intercepted CMP endpoint.
There is no controlled memory write, arbitrary-address read, or reliable path
to remote code execution.
FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary. |
| Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based
on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive
can write and cleanse more bytes than that query reports, causing an 8-byte
out-of-bounds heap write.
Impact summary: An attacker who supplies a crafted CMS message can trigger a
deterministic 8-byte out-of-bounds heap write when the victim decrypts it
with CMS_decrypt(), corrupting the heap and typically resulting in a Denial
of Service.
CWE: CWE-787: Out-of-bounds Write
Description: The key-wrap OID is potentially attacker-controlled on the wire.
CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers.
An attacker can take a legitimate message and change a single OID byte to
select the padded variant while leaving the message otherwise valid. Since
the unwrap key is derived from the recipient's private operation (ECDH key
agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot
pass, and the decryption fails with integrity failure.
The write is a fixed-size (8-byte), fixed-value (zero) heap overflow
immediately past the allocation, requires no special configuration, and is
reachable from the public CMS_decrypt() function. The consequence is
a heap corruption leading to a Denial of Service. The fix in the CMS code
sizes the unwrap output buffer for the worst case so a failed unwrap cannot
write past the allocation.
FIPS impact: no
As the CMS code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| Issue summary: Receiving a DTLS record for a future epoch while a handshake
is in progress causes OpenSSL to buffer far more memory than the record
itself requires.
Impact summary: A peer can use a small amount of network traffic to make an
OpenSSL DTLS endpoint retain a disproportionately large amount of memory,
which may lead to a Denial of Service.
CWE: CWE-405: Asymmetric Resource Consumption (Amplification)
Description: While a DTLS handshake is in progress, a peer may legitimately
have already moved on to the next epoch (for example, having sent its
ChangeCipherSpec and Finished messages) before the local endpoint has
processed the same transition, typically because of reordering on the
underlying UDP transport. OpenSSL buffers such early records so that they
can be processed once the local endpoint catches up.
Buffering a record currently retains the entire read buffer it arrived in,
which is sized to hold the largest possible DTLS record (around 16
kilobytes), rather than just the bytes that make up the record itself. Up
to 100 such records may be buffered per connection. As a result, a peer
that sends a stream of small forged records claiming to belong to the next
epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of
memory, despite sending only a small fraction of that amount of data over
the network.
An attacker therefore gains a memory amplification factor of around 1200,
and can multiply the effect across as many associations as it is able to
open, making this a remote memory exhaustion Denial of Service risk for
DTLS servers. Since the memory retained per connection remains bounded,
and any limit an application already places on the number of concurrent
associations also bounds the total exposure, this issue has been assessed
as Low severity.
FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary.
OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this
issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7.
OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22.
Premium support customers only:
OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi
OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr
This issue was reported on 18 May 2026 by Amazon Web Services.
The fix has been developed by Matt Caswell.
-- cut (non-publishing metadata for internal use) --
Reported by: Amazon Web Services
Fixed by: Matt Caswell |
| Issue summary: In a server or client configuration with RFC7250 Raw Public Keys (RPKs)
enabled, and only the private key (with no associated certificate) configured locally,
a NULL pointer dereference may occur when the remote peer solicits raw public keys and
also sends the typically omitted "signature_algorithms_cert" TLS extension.
Impact summary: The impact is limited to a possible Denial of Service as a result of
an application abort, no data disclosure or remote command execution are possible.
CWE: CWE-476: NULL Pointer Dereference
Description: While a passing comment in sample code in the documentation suggests
that key-only RPK configurations are supported, the best-practice RPK configuration
is to always configure a corresponding certificate (possibly self-signed or
signed by any convenient CA).
When the private key is configured along with a matching certificate, the
"signature_algorithms_cert" extension is handled reliably even without the
fix, and peer clients or servers that don't support raw public keys may be
able to complete a TLS connection by pinning or verifying the corresponding
certificate or its public key.
Deployments that prefer to configure just a private key with no certificate
need to upgrade to an updated release as noted below.
FIPS impact: no
No FIPS modules are affected by this issue, as the SSL protocol implementation
is outside the OpenSSL FIPS module boundary. |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.
Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.
When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.
In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.
Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this
issue. |
| Issue summary: Applications performing certificate name checks (e.g., TLS
clients checking server certificates) may attempt to read an invalid memory
address resulting in abnormal termination of the application process.
Impact summary: Abnormal termination of an application can a cause a denial of
service.
Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an `otherName` subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.
Note that basic certificate chain validation (signatures, dates, ...) is not
affected, the denial of service can occur only when the application also
specifies an expected DNS name, Email address or IP address.
TLS servers rarely solicit client certificates, and even when they do, they
generally don't perform a name check against a reference identifier (expected
identity), but rather extract the presented identity after checking the
certificate chain. So TLS servers are generally not affected and the severity
of the issue is Moderate.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |