| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| @fastify/proxy-addr determines which network hops are trusted proxies and backs Fastify's trustProxy setting, so that forwarded headers can be believed. In versions 3.0.0 through 5.1.2, when trustProxy is configured with a zoned IPv6 link-local address, the trust comparison checks only the address bits and ignores the zone identifier, so a host on another link of a multi-homed server that carries the same link-local address is trusted as well. Such an attacker can spoof the X-Forwarded-For, X-Forwarded-Host and X-Forwarded-Proto headers, making the client IP, host and protocol reported by Fastify attacker-chosen values and defeating IP allowlists, rate limiting and audit logging. Exploitation requires a multi-homed server whose trustProxy is a zoned link-local address and an attacker directly on one of its other links; the default configuration and global, private or loopback trust entries are not affected. The issue is fixed in @fastify/proxy-addr 5.1.3, and users should upgrade to 5.1.3 or later. As a workaround, avoid trusting a zoned link-local address on a multi-homed host and trust a global, private or loopback proxy address instead. |
| @fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 3.0.0 through 10.1.3, temporary files written by the saveRequestFiles helper are removed only by a response hook that runs when the response finishes or errors. When a client completes an upload and then disconnects before the handler writes the reply, for example while the handler scans, hashes or forwards the file, the response only emits a close event, the cleanup hook never runs, and the saved files are left on disk. An unauthenticated client can repeat this cheaply to exhaust disk space and deny service to applications that save uploaded files to disk. The issue is fixed in @fastify/multipart 10.1.4, and users should upgrade to 10.1.4 or later. As a workaround, avoid saving request files for untrusted clients, or clean the saved files from a close handler on the raw response so removal also happens when the client disconnects. |
| The
vulnerability enables any attacker with admin access to dump credentials of all
accounts stored on the device, which can then be reused for lateral movement or
further compromise. Since
passwords are stored or processed in a recoverable format, this represents a
critical failure in secure credential handling. |
| @fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 7.4.0 through 10.1.8, when the plugin is registered with the attachFieldsToBody option, the saveRequestFiles helper treats any object in the parsed request body that carries truthy file and buffer properties as an uploaded file. An unauthenticated client can forge such an object through a plain JSON request or a JSON-typed multipart field, so attacker-chosen bytes are written to the temporary directory while upload hooks and the file count and size limits are skipped, and the saved entry keeps the attacker's filename verbatim instead of being reduced to its basename. Because that filename can contain parent directory segments, applications that use it as a write destination, as the project README example does, are exposed to an arbitrary relative-path file write from a single request. The issue is fixed in @fastify/multipart 10.1.9, and users should upgrade to 10.1.9 or later. As a workaround, call saveRequestFiles only after confirming the request is multipart, and reduce each returned filename to its basename or validate it against an allowlist before using it as a destination. |
| @fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, a multipart part whose header block is never terminated before the next boundary is counted by the vendored Dicer parser as an open part that never ends, so the parser emits neither a finish nor an error event and the request hangs. A single unauthenticated request of roughly one hundred bytes triggers the stall, and through @fastify/multipart the hung handler is not released when the client disconnects, so repeated requests leak handlers and whatever resources they hold, such as files, database connections and concurrency slots, until the process is restarted. The same parser is reached by the formData methods of undici versions 5.25.3 through 6.7.0. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. As a workaround, configure Fastify's handler timeout so hung handlers are eventually terminated and their resources released. |
| @fastify/busboy is a streaming parser for multipart and url-encoded form data used by Fastify. In versions 1.0.0 through 3.2.5, the url-encoded parser stops accumulating a field only when the decoded length exactly equals the configured per-field size limit, and a malformed percent escape is passed through verbatim by the decoder, so the decoded length can jump from just below the limit to just above it and skip that equality check. The parser then keeps buffering the field in memory until the next delimiter or the end of the request, so a single unauthenticated url-encoded field or field name can grow to the size of the whole request body regardless of a much smaller configured per-field limit, with memory use bounded only by the independent whole-request body limit. The issue is fixed in @fastify/busboy 3.2.6, which clamps a field as soon as the decoded length reaches or exceeds the limit, and users should upgrade to 3.2.6 or later. As a workaround, set a conservative whole-request body limit so the per-field overshoot cannot exceed it. |
| @fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 3.2.1 through 3.2.5, the parser can interpret the same multipart bytes differently depending on how they are split across socket reads: when the sequence that terminates a part's header block arrives split exactly at the configured header size limit, an off by one error drops the final header line, so a part declared as a binary file attachment is emitted as an ordinary text field instead of a file. A remote client controls both the multipart body and the header padding needed to reach the boundary and can influence segmentation, so an application that applies upload validation such as malware scanning or extension checks only to file events while trusting plain field values may process the payload through the wrong path. The parser level type confusion is fully reproducible, while the downstream validation bypass depends on the application. The issue is fixed in @fastify/busboy 3.2.6, which tracks how many terminator bytes were actually buffered when the limit is reached so a split terminator no longer corrupts the final header, and users should upgrade to 3.2.6 or later. As a workaround, apply the same validation to field values as to file uploads rather than treating file events as a trust boundary. |
| @fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, when a request reaches the configured limit on the number of multipart parts, each further part is skipped without attaching an error listener to the skipped part stream. If the request body ends in the middle of such a skipped part, the vendored Dicer parser emits an error on that stream, and because nothing is listening Node.js raises an unhandled error event and the process exits. A single crafted unauthenticated request is therefore enough to crash the server. The bug is latent in the parser on its own and was first demonstrated through @fastify/multipart versions 10.1.2 through 10.1.4, which keep feeding the request body to the parser after a limit error, and it affects any consumer that sets a finite parts limit and parses request bodies that can be terminated early. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. There is no complete application level workaround because the crash happens inside the parser before application code runs, though consumers that set a finite parts limit should also attach an error listener to the parser stream. |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. Prior to datadog-apm-inject 0.66.0, the Datadog Single Step Instrumentation injector stores helper tooling in a predictable host directory. On Linux or Kubernetes systems with SSI enabled and at least one Java service instrumented through SSI, a local unprivileged attacker with shell access to the same host can influence that tooling and execute code with the privileges of the instrumented Java service. Services that use dd-java-agent without SSI and non-Java language runtimes are not affected. This issue is fixed in datadog-apm-inject 0.66.0. |
| Miren Runtime provides the runtime component for the Miren application platform. Prior to 0.11.1, the QUIC/HTTP3 RPC server on the default port 8443 uses tls.RequestClientCert and does not verify that presented certificates chain to the configured cluster certificate authority. The RPC authenticators derive a caller identity from PeerCertificates[0].Subject.CommonName without requiring a non-empty VerifiedChains value, and certificate identities bypass all RBAC checks. A network attacker who can reach the listener can present a self-signed certificate with an issuer distinguished name matching the public cluster CA subject and gain cluster superuser access, allowing disclosure, modification, or disruption of applications, sandboxes, disks, credentials, and other managed resources. This issue is fixed in version 0.11.1. |
| ALTCHA PHP is a lightweight PHP library for creating and verifying ALTCHA challenges. From 2.0.0 until 2.0.3, the verifySolution method skips HMAC signature verification when a challenge payload omits the signature field, even when hmacSignatureSecret is configured. An attacker can remove the signature, supply attacker-selected low-difficulty challenge parameters, solve the resulting proof of work, and submit a payload that verifies successfully, bypassing the CAPTCHA control. This issue is fixed in version 2.0.3. |
| install-artifact-from-github installs prebuilt native artifacts hosted by GitHub without compiling them locally. Prior to 1.7.0, bin/install-from-cache.js downloads a native .node artifact, allows RE2_DOWNLOAD_MIRROR to select a source, follows HTTP redirects including HTTPS-to-HTTP downgrades, and writes the decompressed response to the artifact path without cryptographic integrity verification before writing or loading it. An attacker who controls a configured mirror, replaces a release asset, or can modify plaintext transport can supply native code that executes when the consumer loads the artifact. Version 1.7.0 adds SHA-256 verification for default-GitHub-source downloads when the consuming package publishes an artifactHashes bag; configured mirrors and packages without a bag remain outside that verification. |
| MISP contains an authorization bypass vulnerability in the Galaxy import/sync functionality (captureGalaxy in app/Model/Galaxy.php). The captureGalaxy() method matched an incoming galaxy payload to an existing galaxy by UUID and unconditionally overwrote the matched record, regardless of whether the importing user belonged to the owning organization or whether the galaxy was a system-provided default galaxy. Any authenticated user holding the perm_galaxy_editor role could therefore: (1) demote a default galaxy by setting its default flag to false, (2) reassign the galaxy's org_id and orgc_id to the attacker's organization, effectively taking ownership, and (3) modify other galaxy fields (name, description, distribution, version). Additionally, the role-level permission check (perm_site_admin or perm_galaxy_editor) was executed after the captureOrganisationAndSG() call, meaning organization and sharing-group data was already captured before the authorization decision was made. The vulnerability requires an authenticated user with the perm_galaxy_editor role and the ability to submit a galaxy import payload containing a UUID that matches an existing galaxy. The security impact is loss of data integrity across the MISP instance: default galaxy definitions are corrupted, cross-organization ownership is silently transferred, and the integrity of shared threat-intelligence galaxy metadata is compromised for all users of the instance. |
| An unauthenticated Remote Code Execution vulnerability was found in the survey passthrough routing and Data Import processing logic, in which a malicious user could potentially exploit it by manipulating HTTP requests to access an unintended controller route from a public survey context and by supplying a crafted file-path/stream parameter during import handling. If successfully exploited, this could allow the attacker to remotely execute arbitrary code on the REDCap server. The attacker does not have to be authenticated in order to exploit this, but exploitation requires knowledge of a valid public survey hash. This vulnerability exists in REDCap 13.3.0 and higher. |
| ** UNSUPPORTED WHEN ASSIGNED ** Deserialization of an inbound SOAP fault in Apache Axis 1.x allows unauthenticated remote class instantiation. When a SOAP <Fault> carries a <detail><exceptionName> element, Axis loads the named class and, if a String <data> element is also present, instantiates it through its String constructor before checking that it is an AxisFault. Loading alone runs the class's static initializer. With a suitable class on the application's classpath this leads to remote code execution. The fault is parsed while the engine resolves the target service, before any per-service handler chain runs, so authentication handlers configured on a service do not protect against it. This affects all Apache Axis 1.x versions through 1.4.
As Axis 1 has been EOL we recommend you migrate to a different SOAP engine, such as Apache Axis 2/Java. Alternatively you could use a build of Axis with the patch from https://github.com/apache/axis-axis1-java/commit/41f3b4e8d04e310ca81f86b92630ab2c11d608bd applied. The Apache Axis project does not expect to create an Axis 1.x release fixing this problem. |
| nVision sends user's token via query parameters of GET requests. An attacker who obtains valid token can gain access to the victim's account and perform actions on their behalf.
This issue was fixed in version 18. |
| LiteLLM through 2026-04-08 allows remote attackers to execute arbitrary code via bytecode rewriting at the /guardrails/test_custom_code URI. |
| A flaw was found in hypershift-addon. Due to an overly permissive role-based access control (RBAC) configuration that grants permissions to all authenticated users rather than restricting them to the addon service, a low-privileged authenticated user can view, modify, or delete managed cluster resources. This improper authorization allows unauthorized users to alter or disrupt clusters across the entire managed fleet. |
| A flaw was found in cyrus-sasl. When processing authentication requests using the Salted Challenge Response Authentication Mechanism (SCRAM), a remote attacker can trigger a null pointer dereference by submitting unexpected channel-binding data. This causes the server process to crash before validating authentication proofs, leading to a Denial of Service (DoS). |
| Missing authorization in Editing in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |