| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The BLOCKED access control list items that are evaluated to deny access on the the proxy protocol port can be bypassed completely when connecting over TCP or TLS and sending the query twice on connection that is kept open. |
| Use of released resource in Mobile in Google Chrome on on Android prior to 152.0.7977.82 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. Prior to version 0.7.1, revocation is the only in-band mechanism that isolates a compromised/offboarded host from a Nebula mesh. Because the blocklist never reaches any peer's config.yml, a Blocked host retains full overlay reachability to every peer under its CA (and internal services on the mesh) for up to 30d (agent) / 365d (mobile). An attacker who exfiltrates host.key+host.crt can run stock slackhq/nebula directly, ignore the agent's 403/410 poll responses, and stay connected after the operator revokes the host. Operator-visible state (UI shows blocked, audit log records it) is misleading. This issue has been patched in version 0.7.1. |
| Operation on a resource after expiration or release in Network in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| EMQX is a scalable and reliable MQTT broker for AI, IoT, IIoT, and connected vehicles. Prior to versions 5.8.11, 5.9.3, 5.10.4, 6.0.3, 6.1.2, and 6.2.1, the plugin-install REST API and dashboard upload accepted stale grants created with emqx ctl plugins allow because there was no five-minute grant lifetime or SHA-256 package binding. An attacker with a compromised dashboard administrator credential or API key with plugin-install permission who finds a stale allowed name and version can upload attacker-controlled bytes under the allowed .tar.gz filename through POST /api/v5/plugins/install or the dashboard plugin upload. The broker then installs and runs attacker-controlled Erlang code with the privileges of the EMQX process. This issue is fixed in versions 5.8.11, 5.9.3, 5.10.4, 6.0.3, 6.1.2, and 6.2.1. |
| BetterDesk is a remote desktop management solution. BetterDesk versions through 2.3.0 improperly invalidate deleted device identities, allowing an unauthenticated client to replay or spoof a device ID and bypass registration controls. Version 3.0.0-alpha contains a patch. No known workarounds are available. |
| In Apache CXF's DefaultEncryptingOAuthDataProvider, revoked access tokens still decrypt successfully, and TokenIntrospectionService reports active:true. The same applies to refresh tokens. This violates the RFC stipulations that 'The authorization server MUST invalidate the token.' and 'introspection of a revoked token MUST return {"active":false}'. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
When dm_bm_read_lock() fails due to locking or checksum errors, it
releases the faulty block implicitly while leaving an invalid output
pointer behind. The caller of dm_bm_read_lock() should not operate on
this invalid dm_block pointer, or it will lead to undefined result.
For example, the dm_array_cursor incorrectly caches the invalid pointer
on reading a faulty array block, causing a double release in
dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put().
Reproduce steps:
1. initialize a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. wipe the second array block offline
dmsteup remove cache cmeta cdata corig
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try reopen the cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
device-mapper: array: array_block_check failed: blocknr 0 != wanted 10
device-mapper: block manager: array validator check failed for block 10
device-mapper: array: get_ablock failed
device-mapper: cache metadata: dm_array_cursor_next for mapping failed
------------[ cut here ]------------
kernel BUG at drivers/md/dm-bufio.c:638!
Fix by setting the cached block pointer to NULL on errors.
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/damaged" test in dm-unit:
dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext()
This command:
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: block dev insert failed: -EBUSY.
fails because user space requests the same block index to be set for
both ingress and egress.
[ side note, I don't think it even failed prior to commit 913b47d3424e
("net/sched: Introduce tc block netdev tracking infra"), because this
is a command from an old set of notes of mine which used to work, but
alas, I did not scientifically bisect this ]
The problem is not that it fails, but rather, that the second time
around, it fails differently (and irrecoverably):
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: dsa_core: Flow block cb is busy.
[ another note: the extack is added by me for illustration purposes.
the context of the problem is that clsact_init() obtains the same
&q->ingress_block pointer as &q->egress_block, and since we call
tcf_block_get_ext() on both of them, "dev" will be added to the
block->ports xarray twice, thus failing the operation: once through
the ingress block pointer, and once again through the egress block
pointer. the problem itself is that when xa_insert() fails, we have
emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the
offload never sees a corresponding FLOW_BLOCK_UNBIND. ]
Even correcting the bad user input, we still cannot recover:
$ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact
Error: dsa_core: Flow block cb is busy.
Basically the only way to recover is to reboot the system, or unbind and
rebind the net device driver.
To fix the bug, we need to fill the correct error teardown path which
was missed during code movement, and call tcf_block_offload_unbind()
when xa_insert() fails.
[ last note, fundamentally I blame the label naming convention in
tcf_block_get_ext() for the bug. The labels should be named after what
they do, not after the error path that jumps to them. This way, it is
obviously wrong that two labels pointing to the same code mean
something is wrong, and checking the code correctness at the goto site
is also easier ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Ignore multiple conn complete events
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 |
| In the Linux kernel, the following vulnerability has been resolved:
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
do_mq_timedreceive calls wq_sleep with a stack local address. The
sender (do_mq_timedsend) uses this address to later call pipelined_send.
This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:
RIP: 0010:wake_q_add_safe+0x13/0x60
Call Trace:
__x64_sys_mq_timedsend+0x2a9/0x490
do_syscall_64+0x80/0x680
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f5928e40343
The race occurs as:
1. do_mq_timedreceive calls wq_sleep with the address of `struct
ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
holds a valid `struct ext_wait_queue *` as long as the stack has not
been overwritten.
2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
__pipelined_op.
3. Sender calls __pipelined_op::smp_store_release(&this->state,
STATE_READY). Here is where the race window begins. (`this` is
`ewq_addr`.)
4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
will see `state == STATE_READY` and break.
5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
stack. (Although the address may not get overwritten until another
function happens to touch it, which means it can persist around for an
indefinite time.)
6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
`struct ext_wait_queue *`, and uses it to find a task_struct to pass to
the wake_q_add_safe call. In the lucky case where nothing has
overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
bogus address as the receiver's task_struct causing the crash.
do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.
As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix
those in the same way. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this. |
| In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query. |
| An issue was discovered in cyrus-imapd in Cyrus IMAP through 3.12.2. URLAUTH does not honor revoked authorizer access. A URLAUTH URL minted while the authorizer had access continued to work after that access was revoked. |
| Operation on a resource after expiration or release in Microsoft Edge (Chromium-based) allows an unauthorized attacker to disclose information over a network. |
| Capgo before 12.128.12 fails to filter deleted app versions when joining channels during /updates resolution, allowing deleted bundles to remain selectable. Attackers can continue deploying deleted bundles to devices by exploiting the missing app_versions.deleted filter in channel version joins. |
| Mattermost versions 11.5.x <= 11.5.1, 10.11.x <= 10.11.13 fail to enforce the PostEditTimeLimit on non-message post fields which allows an authenticated user to modify post file attachments, props, and pin status after the edit window has expired via the post patch and update API endpoints.. Mattermost Advisory ID: MMSA-2026-00631 |
| Squid is a caching proxy for the Web. Due to an expired pointer reference bug, Squid prior to version 6.6 is vulnerable to a Denial of Service attack against Cache Manager error responses. This problem allows a trusted client to perform Denial of Service when generating error pages for Client Manager reports. Squid older than 5.0.5 have not been tested and should be assumed to be vulnerable. All Squid-5.x up to and including 5.9 are vulnerable. All Squid-6.x up to and including 6.5 are vulnerable. This bug is fixed by Squid version 6.6. In addition, patches addressing this problem for the stable releases can be found in Squid's patch archives. As a workaround, prevent access to Cache Manager using Squid's main access control: `http_access deny manager`. |
| The Notary Project is a set of specifications and tools intended to provide a cross-industry standard for securing software supply chains by using authentic container images and other OCI artifacts. An external actor with control of a compromised container registry can provide outdated versions of OCI artifacts, such as Images. This could lead artifact consumers with relaxed trust policies (such as `permissive` instead of `strict`) to potentially use artifacts with signatures that are no longer valid, making them susceptible to any exploits those artifacts may contain. In Notary Project, an artifact publisher can control the validity period of artifact by specifying signature expiry during the signing process. Using shorter signature validity periods along with processes to periodically resign artifacts, allows artifact producers to ensure that their consumers will only receive up-to-date artifacts. Artifact consumers should correspondingly use a `strict` or equivalent trust policy that enforces signature expiry. Together these steps enable use of up-to-date artifacts and safeguard against rollback attack in the event of registry compromise. The Notary Project offers various signature validation options such as `permissive`, `audit` and `skip` to support various scenarios. These scenarios includes 1) situations demanding urgent workload deployment, necessitating the bypassing of expired or revoked signatures; 2) auditing of artifacts lacking signatures without interrupting workload; and 3) skipping of verification for specific images that might have undergone validation through alternative mechanisms. Additionally, the Notary Project supports revocation to ensure the signature freshness. Artifact publishers can sign with short-lived certificates and revoke older certificates when necessary. This revocation serves as a signal to inform artifact consumers that the corresponding unexpired artifact is no longer approved by the publisher. This enables the artifact publisher to control the validity of the signature independently of their ability to manage artifacts in a compromised registry. |
| On affected platforms with hardware IPSec support running Arista EOS with certain IPsec features enabled, EOS may exhibit unexpected behavior in specific cases. Physical interface flaps and certain agent restarts can cause IPsec tunnel re-establishment with existing Security Associations, resulting in sequence number mismatches between tunnel endpoints potentially causing unstable communication. |