| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
[ rjw: Subject edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mipi-dsi: Detach devices when removing the host
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: Fix PM runtime leakage in am65_cpsw_nuss_ndo_slave_open()
Ensure pm_runtime_put() is issued in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Reinject transport-mode packets through workqueue
The following warning is displayed when the tcp6-multi-diffip11 stress
test case of the LTP test suite is tested:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198]
CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : des3_ede_encrypt+0x27c/0x460 [libdes]
lr : 0x3f
sp : ffff80000ceaa1b0
x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280
x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b
x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038
x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033
x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248
x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548
x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748
x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b
x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3
x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872
Call trace:
des3_ede_encrypt+0x27c/0x460 [libdes]
crypto_des3_ede_encrypt+0x1c/0x30 [des_generic]
crypto_cbc_encrypt+0x148/0x190
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_rcv_established+0x3c8/0x720
tcp_v6_do_rcv+0xdc/0x4a0
tcp_v6_rcv+0xc24/0xcb0
ip6_protocol_deliver_rcu+0xf0/0x574
ip6_input_finish+0x48/0x7c
ip6_input+0x48/0xc0
ip6_rcv_finish+0x80/0x9c
xfrm_trans_reinject+0xb0/0xf4
tasklet_action_common.constprop.0+0xf8/0x134
tasklet_action+0x30/0x3c
__do_softirq+0x128/0x368
do_softirq+0xb4/0xc0
__local_bh_enable_ip+0xb0/0xb4
put_cpu_fpsimd_context+0x40/0x70
kernel_neon_end+0x20/0x40
sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce]
sha1_ce_finup+0x94/0x110 [sha1_ce]
crypto_shash_finup+0x34/0xc0
hmac_finup+0x48/0xe0
crypto_shash_finup+0x34/0xc0
shash_digest_unaligned+0x74/0x90
crypto_shash_digest+0x4c/0x9c
shash_ahash_digest+0xc8/0xf0
shash_async_digest+0x28/0x34
crypto_ahash_digest+0x48/0xcc
crypto_authenc_genicv+0x88/0xcc [authenc]
crypto_authenc_encrypt+0xd8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_push+0xb4/0x14c
tcp_sendmsg_locked+0x71c/0xb64
tcp_sendmsg+0x40/0x6c
inet6_sendmsg+0x4c/0x80
sock_sendmsg+0x5c/0x6c
__sys_sendto+0x128/0x15c
__arm64_sys_sendto+0x30/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x170/0x194
do_el0_svc+0x38/0x4c
el0_svc+0x28/0xe0
el0t_64_sync_handler+0xbc/0x13c
el0t_64_sync+0x180/0x184
Get softirq info by bcc tool:
./softirqs -NT 10
Tracing soft irq event time... Hit Ctrl-C to end.
15:34:34
SOFTIRQ TOTAL_nsecs
block 158990
timer 20030920
sched 46577080
net_rx 676746820
tasklet 9906067650
15:34:45
SOFTIRQ TOTAL_nsecs
block 86100
sched 38849790
net_rx
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid crash when inline data creation follows DIO write
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.
[ 77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[ 77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[ 77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G OE 6.1.0-rc5 #1
[ 77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[ 77.554912] RIP: 0010:__might_sleep+0x116/0x160
[ 77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282
[ 77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000
[ 77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9
[ 77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba
[ 77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60
[ 77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660
[ 77.554934] FS: 0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000
[ 77.554937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0
[ 77.554942] Call Trace:
[ 77.554944] <TASK>
[ 77.554952] mutex_lock+0x78/0xf0
[ 77.554973] vub300_enable_sdio_irq+0x103/0x3c0 [vub300]
[ 77.554981] sdio_irq_thread+0x25c/0x5b0
[ 77.555006] kthread+0x2b8/0x370
[ 77.555017] ret_from_fork+0x1f/0x30
[ 77.555023] </TASK>
[ 77.555025] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_dsp_rproc: Add mutex protection for workqueue
The workqueue may execute late even after remoteproc is stopped or
stopping, some resources (rpmsg device and endpoint) have been
released in rproc_stop_subdevices(), then rproc_vq_interrupt()
accessing these resources will cause kennel dump.
Call trace:
virtqueue_add_split+0x1ac/0x560
virtqueue_add_inbuf+0x4c/0x60
rpmsg_recv_done+0x15c/0x294
vring_interrupt+0x6c/0xa4
rproc_vq_interrupt+0x30/0x50
imx_dsp_rproc_vq_work+0x24/0x40 [imx_dsp_rproc]
process_one_work+0x1d0/0x354
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Add mutex protection in imx_dsp_rproc_vq_work(), if the state is
not running, then just skip calling rproc_vq_interrupt().
Also the flush workqueue operation can't be added in rproc stop
for the same reason. The call sequence is
rproc_shutdown
-> rproc_stop
->rproc_stop_subdevices
->rproc->ops->stop()
->imx_dsp_rproc_stop
->flush_work
-> rproc_vq_interrupt
The resource needed by rproc_vq_interrupt has been released in
rproc_stop_subdevices, so flush_work is not safe to be called in
imx_dsp_rproc_stop. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H). |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Siebel CRM Deployment executes to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| In onStart of CompanionDeviceManagerService.java, there is a possible confused deputy due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible persistent denial of service due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of KeyguardViewMediator.java , there is a possible way to bypass lockdown mode with screen pinning due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
video/aperture: Call sysfb_disable() before removing PCI devices
Call sysfb_disable() from aperture_remove_conflicting_pci_devices()
before removing PCI devices. Without, simpledrm can still bind to
simple-framebuffer devices after the hardware driver has taken over
the hardware. Both drivers interfere with each other and results are
undefined.
Reported modesetting errors [1] are shown below.
---- snap ----
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008
Call Trace:
<TASK>
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
...
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e
Call Trace:
<TASK>
? memcpy_toio+0x76/0xc0
? memcpy_toio+0x1b/0xc0
? drm_fb_memcpy_toio+0x76/0xb0
? drm_fb_blit_toio+0x75/0x2b0
? simpledrm_simple_display_pipe_update+0x132/0x150
? drm_atomic_helper_commit_planes+0xb6/0x230
? drm_atomic_helper_commit_tail+0x44/0x80
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
The problem was added by commit 5e0137612430 ("video/aperture: Disable
and unregister sysfb devices via aperture helpers") to v6.0.3 and does
not exist in the mainline branch.
The mainline commit 5e0137612430 ("video/aperture: Disable and
unregister sysfb devices via aperture helpers") has been backported
from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that
reworks fbdev framebuffer ownership. The backport misses a change to
aperture_remove_conflicting_pci_devices(). Mainline itself is fine,
because the function does not exist there as a result of the patch
series.
Instead of backporting the whole series, fix the additional function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not sense pfmemalloc status in skb_append_pagefrags()
skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.
In commit 326140063946 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.
We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:
BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags
write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:323 [inline]
lru_add_fn+0x327/0x410 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
lru_add_drain_cpu+0x73/0x250 mm/swap.c:669
lru_add_drain+0x21/0x60 mm/swap.c:773
free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311
tlb_batch_pages_flush mm/mmu_gather.c:59 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:256 [inline]
tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263
tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363
exit_mmap+0x190/0x4d0 mm/mmap.c:3098
__mmput+0x27/0x1b0 kernel/fork.c:1185
mmput+0x3d/0x50 kernel/fork.c:1207
copy_process+0x19fc/0x2100 kernel/fork.c:2518
kernel_clone+0x166/0x550 kernel/fork.c:2671
__do_sys_clone kernel/fork.c:2812 [inline]
__se_sys_clone kernel/fork.c:2796 [inline]
__x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1817 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2432 [inline]
skb_fill_page_desc include/linux/skbuff.h:2453 [inline]
skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974
unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xffffea00058fc188
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: verify the expected usb_endpoints are present
The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
kthread+0x3b4/0x4a0 kernel/kthread.c:313
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.
This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.
Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: make sure skb->len != 0 when redirecting to a tunneling device
syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295
Call Trace:
dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
__bpf_tx_skb net/core/filter.c:2115 [inline]
__bpf_redirect_no_mac net/core/filter.c:2140 [inline]
__bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
____bpf_clone_redirect net/core/filter.c:2447 [inline]
bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
bpf_prog_48159a89cb4a9a16+0x59/0x5e
bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
__bpf_prog_run include/linux/filter.h:596 [inline]
bpf_prog_run include/linux/filter.h:603 [inline]
bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
__sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
__do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x61/0xc6
The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull? |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: set UXN on swapper page tables
[ This issue was fixed upstream by accident in c3cee924bd85 ("arm64:
head: cover entire kernel image in initial ID map") as part of a
large refactoring of the arm64 boot flow. This simple fix is therefore
preferred for -stable backporting ]
On a system that implements FEAT_EPAN, read/write access to the idmap
is denied because UXN is not set on the swapper PTEs. As a result,
idmap_kpti_install_ng_mappings panics the kernel when accessing
__idmap_kpti_flag. Fix it by setting UXN on these PTEs. |