| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Untrusted Pointer Dereference in ASUS certain motherboards firmware allows a kernel-level privileges user can supply an arbitrary memory address via an I/O command, leading to subsequent system information being tampered with or causing a system crash.
Refer to the 'Security Update for Multiple ASUS Motherboards' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| FreeRDP before 3.32.2 contains a use-after-free in the urbdrc USB redirection channel because FindChannelById returns a channel pointer without a reference and the control-channel close path does not take the device manager's loading_lock. A malicious RDP server can send a control-channel CLOSE_REQUEST while the client announces a USB device, freeing the channel before the announcement thread reads channel->Write and crashing the client. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, built with TX_ENABLE_EVENT_TRACE, the Module Manager lets a user-mode, memory-protected module register any function pointer as the kernel's trace-buffer-full callback, which the kernel calls from privileged code when the trace buffer wraps. A malicious module can thereby run its own code with kernel privilege, defeating module isolation, or fault the kernel with an invalid pointer. |
| Refitter is a tool for generating a C# REST API client using the Refit library. Prior to 2.1.1, the `refitter` dotnet tool invokes `NJsonSchema` with unsafe defaults for `$ref` resolution when generating Refit interfaces and contracts from attacker-controlled or attacker-influenced OpenAPI descriptions. Remote `http(s)` references cause requests from the developer or CI host and inline untrusted remote schema content into generated output. Absolute local file paths and relative `../` traversal outside the input directory also resolve and inline local content, permitting arbitrary local-file disclosure. The demonstrated chain stops at server-side request forgery, remote file inclusion, and local file inclusion, not code execution: Refit sets the base URL at runtime, enum values use verbatim-string doubling, and string defaults are escaped. This issue is fixed in version 2.1.1. |
| Functype is a family of TypeScript functional programming libraries. Prior to 1.4.4, the `set_functype_version` MCP tool in `functype-mcp-server` accepts an unconstrained `version` string using only `z.string()` validation in `packages/mcp-server/src/index.ts` and interpolates it into `functype@<version>` for `pnpm add`. Package-alias syntaxes such as `file:`, `npm:`, URLs, or paths can cause an arbitrary local or remote package to be installed as functype. Immediately afterward, `initDocsData(true)` in `packages/mcp-server/src/lib/docs/data.ts` resolves `functype/cli` and dynamically imports the newly installed module, executing attacker-controlled JavaScript with the MCP server process's privileges. Any MCP client able to send a `tools/call` request invoking the tool can exploit the flaw; the tool is enabled by default without authentication in `stdio` mode. A connected AI assistant susceptible to indirect prompt injection can also be induced to invoke it from a malicious document or web page. In non-default `TRANSPORT_TYPE=httpStream` deployments, a network-accessible attacker does not require local access. Successful execution can read process secrets, modify files, or terminate the server. This issue is fixed in `version` 1.4.4. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing maliciously crafted web content may lead to arbitrary code execution. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in `PJSIP TCP/SDP` handling by sending a `SIP INVITE` over a connection-oriented transport and disconnecting before Asterisk responds with the `200 OK`. So far, the crash has only been reproduced when Asterisk is built with `Address Sanitizer`, which detects the issue. `Address Sanitizer` is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Mistral Vibe before 3.0.3 contains a remote code execution vulnerability that allows attackers to run commands by defining git filter drivers in an untrusted repository's .git/config. When started with --worktree, git worktree add applies .gitattributes and runs filter smudge, clean, or process commands before the trusted-folder check, executing attacker commands with user privileges. |
| Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 passes potentially unsafe content into ImageMagick when resizing images. SVG and EPS were accepted as valid image types for contact photo upload and conversion, and both formats can reference external resources and invoke ImageMagick delegates when processed. Upstream fixed this in the commit “Fix passing potentally unsafe attachment content into ImageMagick on image resize”, which removes svg and eps from the accepted types. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: unshare the skb before writing the control block
bcmgenet stores first_cb, last_cb and bytes_sent in the skb control
block and reads them back on completion to free the skb and credit BQL.
ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit
a shared skb that is still in the ring. The next transmit overwrites
last_cb, so the earlier slots complete without crediting their bytes
and BQL stalls the queue until the watchdog resets it.
Unshare the skb before writing the control block.
Reproduce with pktgen in clone_skb mode, which hands the driver the same
skb while earlier copies are still in the ring:
modprobe pktgen
pg=/proc/net/pktgen
echo "add_device eth0" > $pg/kpktgend_0
echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0
echo "dst 192.0.2.1" > $pg/eth0
echo "clone_skb 8" > $pg/eth0
echo "count 0" > $pg/eth0
echo start > $pg/pgctrl &
sleep 5
echo stop > $pg/pgctrl
wait
cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight
inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at
zero. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix use-after-free bug when adding shared proxies
The GPIO lookup table can stay alive for longer than the kobject whose
name string's address we're assigning to lookup->dev_id. Fix a potential
UAF by duplicating the string. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |