| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a container-level ErrorHandler is configured (the mitigation for finding 221000), each delivery whose processing throws still permanently consumes one link credit. After initialCredits (default 100) failing messages the receiver's credit reaches zero and the broker stops delivering, leaving the listener silently stalled while isRunning() remains true.
Spring AMQP 4.1.0 |
| It is possible for outbound HTTP requests using a Micrometer-instrumented client to cause a denial-of-service (DoS) condition due to an unbounded memory leak.
Micrometer 1.17.0
Micrometer 1.16.0 - 1.16.6
Micrometer 1.15.0 - 1.15.12
Micrometer 1.14.0 - 1.14.16
Micrometer 1.9.18 and earlier |
| In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed.
This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response.
In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak. |
| Missing Release of Resource after Effective Lifetime vulnerability in Apache CloudStack's scoped global configuration functionality. It affects different modules and plugins of the CloudStack management server, including Quota, Host-HA, etc., and may lead to eventual denial of service (DoS) scenario for the management server.
This issue affects Apache CloudStack: from 4.7.0 through 4.20.3.0 and from 4.21.0.0 through 4.22.1.0.
Users are recommended to upgrade to version 4.20.3.1 or 4.22.1.1 or later, which fixes the issue. |
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to version 4.2.9, the reservation refresh path in reservation-store.ts reuses the same retimeableSignal but unconditionally registers another abort listener on every refresh. As a result, a remote peer can repeatedly send valid RESERVE requests for the same reservation, causing unbounded listener and closure growth in @libp2p/circuit-relay-v2 relay servers and leading to denial of service. This issue is fixed in version 4.2.9. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: putback folios on invalid migrate nid
damon_pa_migrate() and damos_va_migrate() isolate folios into a local list
and then call damon_migrate_pages(). When target_nid is invalid
(including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages()
returns early without putting the folios back to the LRU.
Callers then discard the list head while those folios remain isolated with
an extra reference taken by folio_isolate_lru(). The pages stay off the
LRU for as long as the mapping exists (anon active+inactive counts drop
while RSS does not), and the leftover references can pin the pages after
the mapping is gone.
Put the folios back on the invalid-nid path so ignored migration requests
still return them to the LRU. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix memory leak in exec_queue_set_hang_replay_state()
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: Fix leak when custom dump_segments addition fails
Free allocated minidump_region 'name' in qcom_add_minidump_segments()
when failing before adding the region to 'dump_segments'. Otherwise,
the 'name' is not tracked and is never freed by qcom_minidump_cleanup().
Return error when adding to 'dump_segments' fails. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix firmware leak in async update
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ixp4xx_hss: fix duplicate HDLC netdev allocation
ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored
in ndev, initialized, and registered with register_hdlc_device(). The
second one is stored in port->netdev and later used by the remove path
for unregister_hdlc_device() and free_netdev().
This means that the registered netdev is not the same object that is
unregistered and freed on remove. It also leaks the first allocation if
the second alloc_hdlcdev() call fails, and the first allocation is not
checked before ndev is used.
Older code allocated the HDLC netdev only once and stored the same object
in both the local variable and port->netdev. The buggy conversion split
this into two alloc_hdlcdev() calls. A later rename changed the local
variable name to ndev, but the underlying mismatch remained.
Fix this by allocating the HDLC netdev only once and assigning the same
object to port->netdev. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: drop in-flight Tx SKBs on close
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix qentry overwrite for CONFIRM_LINK and ADD_LINK_CONT in smc_llc_event_handler()
The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in
smc_llc_event_handler() stores an incoming qentry into the local LLC flow
without first checking whether a qentry is already pending. If a malicious or
buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is
active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the
pointer without freeing the previous allocation, leaking one kmalloc-96 object
per spurious message.
The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry
guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a
duplicate message when qentry is already occupied falls through to break and is
freed by the kfree(qentry) at the out: label, rather than silently leaking the
existing allocation.
The response direction (smc_llc_rx_response()) is unaffected: it already guards
with flow->qentry at the equivalent site and drops duplicate responses
correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: free volume-wide resources on fill_super failure
ntfs_fill_super()'s err_out_now path frees only the volume struct via
kfree(vol), leaving several vol-owned allocations behind on every mount
failure:
- vol->nls_map, loaded by ntfs_init_fs_context() via
load_nls_default() (or replaced by an explicit nls= option in
ntfs_parse_param()), is never unload_nls()'d.
- vol->volume_label, allocated by load_system_files() through
ntfs_ucstonls() once the $Volume name attribute has been parsed, is
not released by load_system_files()'s own error labels nor by the
fill_super() inline cleanup that only runs on d_make_root()
failure. Any later failure inside load_system_files() leaks it.
- vol->lcn_empty_bits_per_page was kvfree()'d in
unl_upcase_iput_tmp_ino_err_out_now without clearing the pointer,
so it could not be folded into a single common cleanup.
Because the failure paths never call ntfs_volume_free() and never reach
the d_make_root() inline cleanup block (it sits above the label and is
jumped over by the load_system_files() / kvmalloc failure gotos), these
resources accumulate per failed mount attempt with no chance of
recovery short of unloading the module. This is a silent leak: the
inodes loaded prior to failure remain hashed but generic_shutdown_super()
skips evict_inodes() when sb->s_root is unset, so no CHECK_DATA_CORRUPTION
warning is emitted either.
Move the per-volume frees down to err_out_now and drop the
lcn_empty_bits_per_page kvfree() from the upper label so the cleanup is
performed exactly once on every failure path. Using unconditional
kvfree() / kfree() / unload_nls() is safe because they all accept NULL
and the upper labels that previously freed nls_map (the d_make_root()
inline cleanup) already clear the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: free madvise VMA array on L2 flush failure
xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas().
After get_vmas() succeeds with at least one VMA, error paths must go
through free_vmas so the array is released before the madvise details are
destroyed.
The L2 flush validation path added for PAT madvise rejects some
SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to
madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on
each failed ioctl.
Jump to free_vmas instead, matching the other validation failure paths
after get_vmas() has succeeded.
(cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix tx ident leak for commands without a response
Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding
TX ident") changed ident allocation to use an IDA, releasing idents in
l2cap_put_ident() when the matching response command is received.
But identifiers allocated for commands that have no response defined
are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for
the lifetime of an LE CoC channel, so a peer streaming data to the
host exhausts the 1-255 ident range after 254 credit packets. From
then on l2cap_get_ident() fails:
kernel: Bluetooth: Unable to allocate ident: -28
and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0,
which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling
identifier 0x00 is an invalid identifier and shall never be used in
any command"). Remote stacks that validate the ident drop these
commands, never receive new credits, and the channel stalls
permanently. With default socket buffers this happens after roughly 0.5 MB
of received data (the exact amount depends on the socket receive buffer):
< ACL Data TX: Handle 2048 flags 0x00 dlen 12
LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4
Source CID: 64
Credits: 1
Release the ident immediately after sending L2CAP_LE_CREDITS since no
response will ever release it. Use a local variable instead of
chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on
(e.g. a pending reconfigure) is not overwritten by a credit packet.
Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so
idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released
when the response arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writeback error handling
Fix the error handling in writeback_iter() loop. If an error occurs,
writeback_iter() needs to be called again with *error set to the error so
that it can clean up iteration state. Further, the current folio needs
unlocking and redirtying. |