Search Results (426434 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-82724 1 Ash-project 1 Ash Phoenix 2026-09-01 N/A
Incorrect Authorization vulnerability in ash-project ash_phoenix invokes the SubdomainHook authorization callback with a nil tenant, so tenant-scoped access checks never see the tenant they are meant to enforce. AshPhoenix.LiveView.SubdomainHook.on_mount/4 attached a handle_params hook to assign the tenant and then immediately called handle_subdomain in the same on_mount. The tenant assign is only written when LiveView later runs handle_params, strictly after on_mount returns, so handle_subdomain read an unset assign and ran as apply(m, f, [socket, nil | a]). A consumer gate that halts when the user does not belong to the tenant instead evaluated nil, either crashing or taking a permissive branch, and it was never re-run once the real subdomain was assigned or on later navigations. The fix runs handle_subdomain inside the handle_params hook with the real tenant on every navigation. This issue affects ash_phoenix: from 2.1.26 before 2.3.25.
CVE-2026-82367 1 Ash-project 1 Ash Graphql 2026-09-01 N/A
Exposure of Data Element to Wrong Session vulnerability in ash-project ash_graphql can deliver one subscription's resolved records to a different subscriber's topic. AshGraphql.Subscription.Batcher.do_send/5 reads the resolved batch from the process dictionary via Process.get(:batch_resolved) and then unconditionally deletes it. That is sound only inside a task the library owns. On the :backpressure_sync and :noproc fallbacks do_send/5 runs inline in the publishing caller's process, so if a resolver inside an outer do_send/5 triggers another synchronous Ash notification, the inner call finds the outer run's value still under :batch_resolved, adopts it as its own result, and publishes it to the inner topic, a different subscription document with a different actor and tenant. It then deletes the key, so the outer run publishes nothing. The key is not namespaced by run, so records cannot be told apart. The fix saves, clears, and restores :batch_resolved around each run. This issue affects ash_graphql: from 1.4.0 before 1.11.0.
CVE-2026-81322 1 Ash-project 1 Ash Cloak 2026-09-01 N/A
Exposure of Sensitive Information to an Unauthorized Actor vulnerability in ash-project ash_cloak allows anyone with access to logs, error trackers, or crash reports, or anyone who can trigger a validation error, to recover the plaintext of a field the library encrypts. AshCloak.Transformers.SetUpEncryption removes each cloaked attribute from the action's accept list and adds an action argument that carries the plaintext into the encryption change. That argument is built with sensitive?: attr.sensitive?, inheriting the flag from the source attribute, so a cloaked attribute declared without sensitive? true produces a non-sensitive argument. It is the only place the cleartext value lives, and the one place Ash will not redact: it appears verbatim in inspect(changeset), Ash.Error.Invalid and validation error messages, telemetry, :sys dumps, and error-tracker payloads. The generated encrypted attribute and decrypt calculation are already hardcoded sensitive. This issue affects ash_cloak: from 0.1.0 before 0.4.0.
CVE-2026-81319 1 Ash-project 1 Ash Cloak 2026-09-01 N/A
Deserialization of Untrusted Data vulnerability in ash-project ash_cloak allows an attacker who can influence the bytes of an encrypted column to crash the BEAM node, by triggering unbounded atom creation or a decompression bomb during decryption. AshCloak.Calculations.Decrypt decodes the decrypted binary with Ash.Helpers.non_executable_binary_to_term/1 without the :safe option, so atoms in the payload are interned during the decode and never garbage collected, and the term format's compressed form is inflated transparently. vault.decrypt!() is the only barrier and stops tampering only for an authenticated cipher. Cloak also ships the unauthenticated AES.CTR, whose ciphertext an attacker who knows their own plaintext can XOR into any same-length payload without the key, so an ordinary read of the forged column reaches the decoder. A few hundred kilobytes of distinct atoms exhausts the atom table, or a small compressed payload inflates to gigabytes. This issue affects ash_cloak: from 0.1.0 before 0.4.0.
CVE-2026-78699 1 Ash-project 1 Ash Postgres 2026-09-01 N/A
Unchecked Return Value vulnerability in ash-project ash_postgres allows a user who can drive a tenant rename to a name that collides with an existing tenant's schema to have their tenant record repointed at that other tenant's live schema, gaining access to its data. AshPostgres.MultiTenancy.rename_tenant/3 issues the ALTER SCHEMA ... RENAME TO ... with the non-raising Ecto.Adapters.SQL.query/2, discards its {:ok, _} | {:error, _} result, and unconditionally returns :ok. PostgreSQL rejects the rename when the target schema already exists (and on insufficient privilege or lock timeout), but that failure never reaches the caller. The calling manage_tenant update action therefore sees success and commits the tenant row with the new name, which is the schema of a different existing tenant, so subsequent reads and writes for that tenant run against the other tenant's data. This issue affects ash_postgres: from 0.25.0 before 2.13.0.
CVE-2026-77950 1 Ash-project 1 Ash Typescript 2026-09-01 N/A
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to receive unredacted internal error data by provoking an error shape the configured error handler does not match. apply_error_handler/3 in lib/ash_typescript/rpc/errors.ex is the only hook an application has for redacting or suppressing errors before they reach the client, with a nil return dropping the error entirely. Its rescue clause logs a warning and then returns the original, pre-handler error map. Error handlers are conventionally written as pattern-matching functions over expected error shapes, so an unmatched shape raises FunctionClauseError and the raw transformed error, including any secrets carried in vars, is emitted instead. An intent to suppress an error becomes an intent to publish it. The rescue catches exceptions only, so a handler that throws or exits still propagates. This issue affects ash_typescript: from 0.8.0 before 0.18.0.
CVE-2026-74837 1 Ash-project 1 Ash Typescript 2026-09-01 N/A
Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_typescript allows an unauthenticated attacker to exhaust the BEAM atom table and abort the node via client-supplied RPC field names. AshTypescript.FieldFormatter.convert_to_field_atom/2 in lib/ash_typescript/field_formatter.ex converts a client-supplied field name to an atom with String.to_atom/1 when no matching atom already exists. It delegates first to parse_input_field/2, which resolves the name with String.to_existing_atom/1 and falls back to returning the plain string; convert_to_field_atom/2 then mints an atom from that string rather than treating the name as unknown. RPC field selection reaches it for every requested field name through AshTypescript.Rpc.FieldProcessing.FieldSelector, which resolves each name before checking that the field exists, with no allowlist, length bound, or rate limit. Atoms are never garbage collected, so each distinct name mints a permanent one and the VM aborts once the atom table limit is reached. A field name over 255 characters additionally raises an uncaught SystemLimitError. This issue affects ash_typescript: from 0.1.0 before 0.18.0.
CVE-2026-75758 1 Elixir-lang 1 Elixir 2026-09-01 N/A
Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory. Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape. Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs. This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4.
CVE-2026-79653 1 Eclipse 1 Eclipse Sw360 2026-09-01 N/A
In Eclipse SW360 versions 19.0.0, 19.1.0, 19.2.0, 20.0.0, 20.1.0, if the system is configured to use file system storage with config key enable.attachment.store.to.file.system, the attacker can manipulate the filename upon upload and can essentially cause arbitrary file path traversal. The immediate workaround is to disable enable.attachment.store.to.file.system or update to fixed versions.
CVE-2026-19471 2 Rockwell Automation, Rockwellautomation 2 Armorstart Lt, Armorstart Lt 2026-09-01 N/A
Multiple stored cross-site scripting security issues exist within ArmorStart® LT. Stored XSS occurs when user input is not properly sanitized and is stored on the server, allowing an attacker to inject malicious scripts that will be executed when other users access the affected page.
CVE-2026-71566 1 Openshift-metal3 1 Fakefish 2026-09-01 9.3 Critical
FakeFish handles incoming credentials by passing them down to scripts. This works for real hardware because in the end it's up to the BMC to validate them. However, KubeVirt relies on a KUBECONFIG file mounted to the container and completely ignores the credentials. This allows any user of the cluster to control VMs of the user that created fakefish, power them on and off, and mount arbitrary CD images to them.
CVE-2026-51745 1 Totolink 1 T6 2026-09-01 5.3 Medium
Incorrect access control in the updatePriStaList function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to refresh the primary station list via sending a crafted MQTT message to the cs_broker component.
CVE-2026-75418 2026-09-01 7.5 High
A path traversal vulnerability exists in the built-in preview/development web server of Lektor <3.3.14 on Windows. An attacker with network access to the server can send a crafted HTTP request containing path traversal sequences to read arbitrary files accessible to the process, disclosing sensitive information such as system files and deployment configuration files containing credentials.
CVE-2020-8619 7 Canonical, Debian, Fedoraproject and 4 more 7 Ubuntu Linux, Debian Linux, Fedora and 4 more 2026-09-01 4.9 Medium
In ISC BIND9 versions BIND 9.11.14 -> 9.11.19, BIND 9.14.9 -> 9.14.12, BIND 9.16.0 -> 9.16.3, BIND Supported Preview Edition 9.11.14-S1 -> 9.11.19-S1: Unless a nameserver is providing authoritative service for one or more zones and at least one zone contains an empty non-terminal entry containing an asterisk ("*") character, this defect cannot be encountered. A would-be attacker who is allowed to change zone content could theoretically introduce such a record in order to exploit this condition to cause denial of service, though we consider the use of this vector unlikely because any such attack would require a significant privilege level and be easily traceable.
CVE-2026-11617 1 Tanium 1 Findings 2026-09-01 3.1 Low
Tanium addressed a compression bomb vulnerability in Findings.
CVE-2026-71401 1 Suse 1 Wicked 2026-09-01 N/A
An integer underflow was found in the DHCPv4 packet capture code of wicked. ni_capture_inspect_udp_header() in src/capture.c does not verify that the IP total length field (ip_len) is at least as large as the IP header length (ihl) before subtracting the header length. An unauthenticated attacker on the same network can thereby trigger an out-of-bounds read past the receive buffer in the wicked DHCPv4 client (wickedd-dhcp4), which can crash the daemon depending on the process memory layout. No information disclosure has been demonstrated. This issue affects wicked up to and including version 0.6.80.
CVE-2026-71402 1 Suse 1 Wicked 2026-09-01 5.4 Medium
An out-of-bounds read was found in the DHCPv4 packet capture code of wicked. ni_capture_inspect_udp_header() in src/capture.c reports the IP total length as the payload length instead of the length of the remaining UDP payload. Consequently, the DHCP option walker in the DHCPv4 client (wickedd-dhcp4) reads up to ihl + 8 bytes — at most 68 bytes — past the end of the 1500-byte packet receive buffer. An unauthenticated attacker on the same network who sends a crafted DHCP/UDP packet can make the client parse adjacent heap memory as DHCP options, so that heap contents such as allocator metadata or pointer values can be interpreted into lease fields. The over-read is bounded to 68 bytes; no memory write, no attacker control over the adjacent bytes and no remote exfiltration primitive has been demonstrated. This issue affects wicked up to and including version 0.6.80.
CVE-2026-75476 1 Tanium 1 Threat Response 2026-09-01 3.1 Low
Tanium addressed a compression bomb vulnerability in Threat Response.
CVE-2026-13348 1 Schneider-electric 1 Powerchute Serial Shutdown 2026-09-01 N/A
CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to gain unauthorized access to a user account by performing an arbitrary number of authentication attempts when redirect handling is disabled.
CVE-2026-76203 1 Maalfer 1 Pentestify 2026-09-01 N/A
Incorrect Behavior Order: Validate Before Canonicalize in the report theme CSS sanitizer in maalfer Pentestify 1.2.0 through 2.3.2 allows an authenticated user to force outbound HTTP requests from other users' browsers, disclosing their IP address and User-Agent, via CSS hex escapes that reconstruct the url() function and evade the sanitizer blocklist