| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix header buffer corruption with header-split and HW-GRO
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - validate control endpoint type
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint. |
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write via an unvalidated numeric placeholder that sets the binder counter in preparse.
preparse reserves seven output bytes per input byte, the width of the longest ':p99999' expansion. The ':N' branch parses the number with `atoi(src)` and assigns it to the binder counter with no range check, so a statement containing ':2147483648' leaves the counter negative (-2147483648 with glibc, where atoi wraps). Each following '?' then expands through `sprintf(start, ":p%d", idx++)` to ':p-2147483648', 14 bytes with the terminating NUL where the buffer budgets 7. The placeholder limit added in 1.650 tests the counter against 99,999, which a negative counter passes.
Any caller that preparses an untrusted statement into ':pN' style placeholders gets a heap out-of-bounds write that grows with the number of '?' marks following the poisoned placeholder. The '?' and '%s' return styles compare the parsed number against the expected sequence and error out, and are unaffected. |
| jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.5.0 until 4.5.10 and 4.6.2, in jupyterlab/extensions/manager.py and jupyterlab/extensions/pypi.py, JupyterLab's PyPI extension manager enforces blocked_extensions_uris by comparing requested install names to blocklist entries with custom normalization that is weaker than PyPI package-name canonicalization. An authenticated user can request a PyPI-equivalent spelling such as JupyterLab.Git for a blocklisted package such as jupyterlab-git, and JupyterLab accepts the install request even though pip resolves the variant to the same package. Security impact requires an allowlist or blocklist intended to restrict package installation, the PyPI Extension Manager, and kernels and terminals that are disabled or delegated to remote hosts. The bypass lets an authenticated user install a prohibited extension, defeat integrity restrictions, and affect availability without gaining new read access. This issue is fixed in versions 4.5.10 and 4.6.2. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Catalyst SD-WAN engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20313 are related to Improper link resolution before file access issues that are grouped under the Common Weakness Enumeration (CWE) CWE-1284. |
| rsync before 3.5.0 contains a logic error in --max-alloc handling that allows a sender or configuration setting --max-alloc=0 to disable allocation sanity checks entirely rather than enforcing a zero-byte cap. Attackers can exploit this flaw to cause the receiver to attempt unbounded memory allocations for file list and data structures, potentially exhausting available memory and causing a denial of service. |
| An issue was discovered in OpenStack Keystone before 29.0.2. POST /v3/credentials did not validate that the caller-supplied project_id for an EC2-type credential matched the project of the authenticating application credential. This allowed an attacker holding an unrestricted application credential for project A to create an EC2 credential targeting project B; a subsequent /v3/ec2tokens exchange would then issue a Keystone token scoped to project B while still carrying the original app_cred_id, enabling cross-project lateral movement within the credential owner's role footprint. |
| Admidio is an open-source user management solution. Version 5.0.9 added a missing `isAdministratorInventory()` gate to `case 'item_delete':` in `modules/inventory.php`. The same fix was not applied to the sibling `case 'field_delete':` handler, which destroys an entire inventory field definition, cascading to every `adm_inventory_item_data` row that referenced that field and every `adm_inventory_field_options` entry. The handler validates only a session-bound CSRF token; there is no `isAdministratorInventory()` check at the controller level, and `Admidio\Inventory\Entity\ItemField::delete()` does not enforce one at the entity level either (unlike its sibling `ItemField::save()`, which does check `$gCurrentUser->isAdministrator()`). Any user who can log in to the site can permanently destroy a non-system inventory field by sending one POST. Version 5.0.10 provides an updated fix. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: URIs whose scheme is split or prefixed with the HTML5 named whitespace character references 	 or 
. CGI.unescapeHTML leaves those references intact, so allowed_uri? reports the URL safe even though a browser decodes and strips the tab or line feed and executes the resulting javascript: URL. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20 |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.17.0 until 2.72.0, a user with write access to a CVAT job can submit a batch automatic annotation request to RequestViewSet.create with inconsistent task and job IDs, and because the task ID determines the single active request slot, block automatic annotation for another task whose ID is known. This issue is fixed in version 2.72.0. |
| Net::CIDR::Set versions before 0.23 for Perl allow memory exhaustion and malformed set ranges via unbounded IPv6 prefix lengths.
The _encode method accepts any prefix length matching `(0|[1-9][0-9]*)` and passes it to _width2bits(), which builds the mask as `'1' x ($width + 8)`, one character per bit. The _inc() method then unpacks the packed mask into a Perl array of one scalar per byte, so the prefix length alone sets the allocation size: `::/100000000` builds a 100 MB string and a 12.5 million element array. The value being tested is parsed, not just the configured ranges: contains() builds a set from its argument, and _guess_coder() tries the IPv4 coder and then the IPv6 coder, so an IPv4-only set expands an oversized IPv6 prefix length before the mixed address width check rejects it.
Any caller that passes untrusted input to contains() or add() can exhaust process memory. A prefix length above 128 is also stored as a range that does not match the requested block: 2001:db8::/129 stringifies back unchanged, contains() of its own base address returns false, and removing it from a set drops the base address while the set still prints as covering it. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority as it's a duplicate of CVE-2026-73241. |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device.
This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| An ACAP configuration file lacks input validation, which could potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not try compression for data reloc inodes
[BUG]
There is a syzbot report that the check inside get_new_location()
triggered:
BTRFS info (device loop0): found 31 extents, stage: move data extents
BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607
item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160
inode generation 5 transid 0 size 0 nbytes 0
block group 0 mode 40755 links 1 uid 0 gid 0
rdev 0 sequence 0 flags 0x0
atime 1669132761.0
ctime 1669132761.0
mtime 1669132761.0
otime 0.0
item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12
index 0 name_len 2
item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160
inode generation 1 transid 16 size 733184 nbytes 106496
block group 0 mode 100600 links 0 uid 0 gid 0
rdev 0 sequence 24 flags 0x18
item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68
generation 16 type 0
inline extent data size 47 ram_bytes 4096 compression 1
[...]
item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0
BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337
------------[ cut here ]------------
btrfs_abort_should_print_stack(__error)
[CAUSE]
The above dump tree shows the first file extent item is inlined, which
should make no sense for data reloc inodes, as such inodes just
represent where the data extents are in the relocation destination chunk.
However the relocation path preallocates space for each block,
then dirties them, cluster by cluster.
It's possible to have a single block at the beginning of the block
group, and no other block in the same cluster.
So relocation will preallocate a file extent for that block and dirty
the first block. Then memory pressure forces the data reloc inode to be
written back, before any other blocks are dirtied/allocated.
Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated
delalloc helper") changed the sequence of delalloc. Before that commit we
always tried NOCOW first, so that dirtied block would be written back into
the preallocated space, and appear as a regular extent.
But with that commit, we always try inline first, and since compression
is forced, we try compressing the first block, and then inline the
compressed data, resulting in the above inlined file extent in the data
reloc tree.
Then the check in get_new_location() will check the file offset, without
checking if the file extent is inlined or not, resulting in the above
failure.
[FIX]
Do not allow compression for data reloc inodes.
Since data reloc inode sizes are always block aligned, as long as we do
not compress, @data_len will always be at least one block, and
that will cause can_cow_file_range_inline() to return false, thus no
inlined extent will be created. |
| imagecli's pipeline operation (Carve::apply in src/image_ops.rs) only asserts , never validating that the ratio is positive. A negative ratio (e.g. -5) causes the computed target width to saturate to 0 via Rust's defined float-to-uint cast, which is then passed to imageproc::seam_carving::shrink_width — a function that panics when given a width below 2, crashing the process. |
| Insufficient validation of untrusted input in Codecs in Google Chrome prior to 151.0.7922.109 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |