Search Results (3427 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-68384 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e)
CVE-2026-68382 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb)
CVE-2026-68338 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not re-register the hook if device unregister already detached the socket.
CVE-2026-68245 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid() The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem. Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from amdgpu_vm.c and making the relevant code inline to hold the lock while it is still in use. (cherry picked from commit 9d01579f3f868b333acc901815972685989092c7)
CVE-2026-68200 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: don't re-enter an instance callback that is still running The userspace-driven timer (utimer) TRIGGER ioctl calls snd_timer_interrupt() directly with no serialization, so two threads triggering the same utimer can run snd_timer_interrupt() on one snd_timer concurrently. snd_timer_process_callbacks() drops timer->lock around each instance callback and marks the in-flight callback with the single SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that bit to drain an in-flight callback before freeing the instance. The bit cannot represent two concurrent callbacks: when a second interrupt re-queues an instance whose callback is still running, both run at once, the first to finish clears the bit, and the close-path drain then frees the instance (and its callback_data) while the other callback is still live - a use-after-free reachable by any user able to open /dev/snd/timer, both via a user timer instance and via a sequencer queue timer bound to the utimer. snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so a concurrent interrupt already observes it under the lock. Skip re-queuing an instance (and its slaves) to the ack/sack list while its callback is in flight; the accumulated pticks are delivered on the next tick, so no event is lost.
CVE-2026-68189 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 remove_uuid+0x25e/0x560 hci_sock_sendmsg+0x1033/0x1ea0 Hold hdev->lock while generating and committing the class-of-device and EIR snapshots. Release it before sending an HCI command, so controller waits do not happen under the device lock. This protects all UUID list walks in these paths and restores the serialization lost in the command sync conversion.
CVE-2026-68143 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: slip: serialize receive against buffer reallocation sl_realloc_bufs() replaces rbuff and updates buffsize while holding sl->lock. slip_receive_buf() reads those fields and writes through rbuff without holding the lock. An MTU change can therefore race with receive processing. An MTU shrink can expose the new smaller rbuff with the old larger bound, causing an out-of-bounds write. A receive callback which already loaded the old rbuff can instead continue writing after that buffer has been freed. Serialize receive processing with sl_realloc_bufs() by holding sl->lock while consuming each receive batch.
CVE-2026-68138 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net/sched: serialize qdisc_rtab_list against concurrent get/put qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no lock. This was only safe because every caller historically held the RTNL mutex, which serialized all rate-table lookups, inserts and frees. That invariant no longer holds. cls_flower sets TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() -> tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each adding a flower filter with a police action carrying the same rate, then race on qdisc_rtab_list and on the non-atomic refcnt, leading to a use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table. qdisc_rtab_list is a single global (not per-netns), so the corrupted object is shared system-wide. BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160 qdisc_put_rtab+0x12f/0x160 tcf_police_init+0xda9/0x1590 tcf_action_init_1+0x460/0x6b0 tcf_action_init+0x439/0xa40 tcf_exts_validate_ex+0x42d/0x550 fl_change+0xddd/0x7da0 tc_new_tfilter+0xaa7/0x2420 rtnetlink_rcv_msg+0x95e/0xe90 which belongs to the cache kmalloc-2k of size 2048 Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The (sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before taking the lock; if a concurrent inserter added an identical table in the meantime the freshly allocated one is freed under the lock, so no duplicate is leaked. qdisc_put_rtab() now decrements the refcount and unlinks under the same lock.
CVE-2026-64600 2 Linux, Redhat 8 Linux Kernel, Enterprise Linux, Enterprise Linux Eus and 5 more 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle.
CVE-2026-64581 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Reachable by an unprivileged user via a user+network namespace. Use the atomic sk_dst_reset() so the cache is cleared and released with a single xchg(): whichever side wins releases the dst once, the other sees NULL and does nothing. Behaviour is otherwise unchanged.
CVE-2026-64375 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().
CVE-2026-64284 1 Linux 1 Linux Kernel 2026-10-19 7.1 High
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits Move the handling of fastpath userspace exits into vendor code to ensure KVM runs vendor specific operations that need to run before userspace gains control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM needs to flush the PML buffer prior to exiting to userspace, otherwise any memory written by the final KVM_RUN might never be flagged as dirty. Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in general, as that risks consuming stale state in a fastpath handler. That will be addressed in a future change.
CVE-2026-64266 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.
CVE-2026-64210 1 Linux 1 Linux Kernel 2026-10-19 7.5 High
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2
CVE-2026-64206 1 Linux 1 Linux Kernel 2026-10-19 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired.
CVE-2026-64160 1 Linux 1 Linux Kernel 2026-10-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted.
CVE-2026-64112 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: rbd: eliminate a race in lock_dwork draining on unmap Given how rbd_lock_add_request() and rbd_img_exclusive_lock() are written, lock_dwork may be (re)queued more than it's actually needed: for example in case a new I/O request comes in while we are in the middle of rbd_acquire_lock() on behalf of another I/O request. This is expected and with rbd_release_lock() preemptively canceling lock_dwork is benign under normal operation. A more problematic example is maybe_kick_acquire(): if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) { dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev); mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0); } It's not unrealistic for lock_dwork to get canceled right after delayed_work_pending() returns true and for mod_delayed_work() to requeue it right there anyway. This is a classic TOCTOU race. When it comes to unmapping the image, there is an implicit assumption of no self-initiated exclusive lock activity past the point of return from rbd_dev_image_unlock() which unlocks the lock if it happens to be held. This unlock is assumed to be final and lock_dwork (as well as all other exclusive lock tasks, really) isn't expected to get queued again. However, lock_dwork is canceled only in cancel_tasks_sync() (i.e. later in the unmap sequence) and on top of that the cancellation can get in effect nullified by maybe_kick_acquire(). This may result in rbd_acquire_lock() executing after rbd_dev_device_release() and rbd_dev_image_release() run and free and/or reset a bunch of things. One of the possible failure modes then is a violated rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); in rbd_dev_header_info() which is called via rbd_dev_refresh() from rbd_post_acquire_action(). Redo exclusive lock task draining to provide saner semantics and try to meet the assumptions around rbd_dev_image_unlock().
CVE-2026-64098 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences().
CVE-2026-64026 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.
CVE-2026-64004 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops.