Search Results (757 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-111243 2026-11-10 N/A
A negative MicroProfile JWT clock skew setting is not rejected and disables validation of the token expiration and other time-based claims. In such configurations, an attacker in possession of an expired token can still authenticate with it. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.
CVE-2026-66986 1 Hcltech 1 Aion 2026-11-10 3.3 Low
HCL AION is affected by a vulnerability where user sessions did not expire after a sufficient period of inactivity. An unattended authenticated session could be used by another person with access to the same system to view information or perform actions on behalf of the user, potentially resulting in unintended behavior or security impact under certain conditions.
CVE-2026-111822 1 Apache 2 Activemq, Activemq Runtime Config 2026-11-10 8.1 High
Improper invalidation of cached authorizations vulnerability in Apache ActiveMQ, Apache ActiveMQ Runtime Config. After the runtime configuration plugin removes a principal's write grant on a destination, an authenticated connection opened before the change can keep sending to that destination, including through a new anonymous producer, while fresh connections and new explicit producers are denied. This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; Apache ActiveMQ Runtime Config: from 6.0.0 before 6.3.3, before 5.19.12. Users are recommended to upgrade to version 6.4.0, 6.3.3 or 5.19.12, which fixes the issue.
CVE-2026-10830 1 Wordpress-extensions 1 Allcoach 2026-11-10 8.8 High
The AllCoach WordPress plugin before 1.0.2 does not verify that an email address submitted to a public account-registration endpoint is not already associated with an existing user before overwriting that user's password, allowing unauthenticated attackers to reset the password of arbitrary accounts, including administrators, and take over the site.
CVE-2026-106466 1 Wordpress-extensions 1 Jwt Auth 2026-11-10 7.5 High
The JWT Auth WordPress plugin through 3.0.2 does not invalidate previously issued refresh tokens when a user changes or resets their password or removes a connected device, allowing an attacker who obtained a refresh token before such an event to keep issuing valid access tokens and retain authenticated access to the account, up to Administrator.
CVE-2026-123813 1 Pyload 1 Pyload 2026-11-09 7.5 High
pyLoad is a free and open-source download manager written in Python. Prior to 0.5.0b3.dev102, pyLoad does not invalidate existing Flask sessions when an administrator changes a user's permissions or password through /api/set_user_permission or /api/change_password. Api.set_user_permission and Api.change_password update the database, but session authorization continues to use role and permission values copied at login by set_session in webui/app/helpers.py. A user can therefore retain revoked privileges or continue using a session established with an old password for the configured session lifetime. API-key authentication is not affected because that path rereads user data from the database. This issue is fixed in version 0.5.0b3.dev102.
CVE-2026-95762 2 Hewlett Packard Enterprise (hpe), Hpe 2 Fabric Composer, Fabric Composer 2026-11-09 5.9 Medium
An insufficient session expiration vulnerability exists in the API of HPE Networking Fabric Composer if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an authenticated administrative attacker to maintain persistent access to the affected system.
CVE-2026-66253 1 Hcltech 1 Icontrol 2026-11-09 3.1 Low
iControl is affected by a Session Timeout vulnerability, which could allow an attacker to exploit an unattended or abandoned active session, enabling unauthorized access to the application and the ability to perform actions on behalf of the victim.
CVE-2026-54375 1 Shenzhen Shine Industrial 1 Vitafit 2026-11-09 8.4 High
VitaFit Android application (com.vt.vitafit) before 2.8.1.0 contains an insecure session management vulnerability that allows attackers to extract or intercept unencrypted m_session_id tokens stored in application backups, which remain valid for ten years. Attackers can use a stolen session token to read and modify the victim's account or delete the account's authentication record, preventing the legitimate owner from logging in again.
CVE-2026-123598 1 Hickory-dns 1 Hickory-dns 2026-11-09 3.7 Low
The validating recursor in Hickory DNS hickory-recursor 0.25.0 through 0.26.0-alpha.1, hickory-resolver 0.26.0-alpha.1 before 0.26.2, and hickory-net 0.26.0-beta.1 before 0.26.2 caches DNSSEC-bogus answers using the untrusted, attacker-supplied record TTL (capped at 24 hours) instead of a short validation-failure TTL. A remote attacker who spoofs a single authoritative response with an invalid signature and a long TTL can keep the bogus result cached for up to 24 hours.
CVE-2026-121735 1 Blueprintue 1 Blueprintue-self-hosted-edition 2026-11-09 3.7 Low
blueprintUE self-hosted edition before 4.3.4 contains an insufficient session expiration vulnerability that allows attackers to confirm accounts using stale tokens because UserModel::findUserIDWithConfirmedToken ignores confirmed_sent_at. Attackers who obtain an old confirmation link from a compromised mailbox, backup, or forwarded mail can activate unconfirmed accounts and evade the unconfirmed-account cleanup job.
CVE-2026-123528 1 Vikunja 1 Vikunja 2026-11-08 6.8 Medium
Vikunja before 2.7.1 contains an insufficient session expiration vulnerability that allows holders of revoked access tokens to keep authenticating because SetupTokenMiddleware skips session and account-status checks. Attackers with a stolen token can, after logout, password reset, or account disabling, mint OAuth sessions via /oauth/authorize or tk_ API tokens for persistent access.
CVE-2026-63400 1 Roostorg 1 Coop 2026-11-06 N/A
Coop is an open source review and moderation tool from ROOST. Prior to 1.0.2, `resetPasswordForToken` updates the password row without invalidating database-backed sessions. An attacker who has acquired a password and established a session retains access even after the legitimate user resets the password, leaving the compromised account under attacker control until the session expires at its `30-day` maximum age. This issue is fixed in version 1.0.2.
CVE-2026-95663 1 Apache 2 Apache Camel, Camel 2026-11-06 4.8 Medium
Insufficient Session Expiration vulnerability in Apache Camel Keycloak component. This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2. When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it.
CVE-2026-116251 1 Pgadmin 1 Pgadmin 4 2026-11-06 4.2 Medium
pgAdmin 4 did not invalidate a user's existing sessions when their password changed, either through the user's own change password dialog or through an administrator resetting it in User Management. A session established before the change, for example on another device or by someone who had obtained the old password or a session cookie, therefore stayed logged in after the change, which is the step a user or administrator takes precisely to cut such access off. It remained usable until it expired. The fix rotates the user's session identifier (fs_uniquifier) whenever the password is changed, so every other session of that user is logged out. The session that made the change is logged in again and keeps its database connections. Saved server passwords, including those for shared servers, are re-encrypted under the new key; any that cannot be decrypted are cleared and the user is told. If re-encryption fails, the sessions are still revoked and the saved passwords are cleared rather than the change failing. This issue affects pgAdmin 4: before 9.19.
CVE-2026-82559 1 Apache 1 Wicket 2026-11-06 N/A
Insufficient session expiration in Apache Wicket. org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open. Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session. An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected. This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue.
CVE-2026-117619 2 Jenkins, Jenkins Project 2 Jenkins, Jenkins 2026-11-06 8.1 High
Jenkins 2.587 and earlier, LTS 2.580.1 and earlier allows requests authenticated using HTTP Basic authentication, including with an API token, to obtain a "remember me" cookie, allowing attackers who have obtained a user's API token to retain access to Jenkins using a "remember me" cookie after the API token is revoked or expires.
CVE-2026-117499 1 Fastify 1 Session 2026-11-04 3.7 Low
@fastify/session is a session plugin for Fastify. In all releases before 11.1.6, with the default rolling session behavior, a request that restored a session before a logout could save its own copy after another request had completed the session destroy call, recreating the destroyed session identifier with its authenticated data. An attacker who already holds a victim's valid signed session cookie and keeps a request in flight across the logout can replay that cookie to restore the session after it was meant to be revoked, without any cookie theft or signature forgery. The issue is fixed in @fastify/session 11.1.6, which adds a per session generation marker and a conditional store write so a session restored before a logout or regeneration cannot recreate or overwrite the current entry, and users should upgrade to 11.1.6 or later. There is no workaround, and custom session stores must implement the new conditional write.
CVE-2026-107146 1 Alexandregz 1 Twofactor Gauthenticator 2026-11-04 N/A
The twofactor_gauthenticator plugin for Roundcube is vulnerable to session persistence after failed 2FA verification. Due to the lack of server-side session destruction, an attacker can ignore the logout redirect and keep the session alive. This may allow an attacker who obtains user's password to e.g. brute force the second-factor code. This issue was fixed in commit 4640889.
CVE-2025-49602 1 Keyfactor 1 Ejbca 2026-11-04 9.8 Critical
An issue was discovered in Keyfactor EJBCA 9. When an administrator is removed from its administrator role while having a valid TLS session, EJBCA may, in certain circumstances, cache authentication for longer than the configured maximum time (default: 30 seconds), which results in the former administrator retaining access that they should no longer have.