| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Seraphinite Accelerator WordPress plugin before 2.29.24 does not perform a capability check on one of its state-update AJAX actions, allowing authenticated users such as subscribers to write a malformed value that causes an uncaught error on every subsequent admin page load, making the entire admin area inaccessible to all administrators (denial of service). |
| The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values below about -30 truncate the computed timeout to zero, and values with a magnitude of 64 or more perform an undefined shift of a uint64_t; the standards-defined "not applicable" encoding 0x7F fell into the latter case as well.
PTP messages are received over unauthenticated link-local traffic (UDP multicast on 224.0.1.129, IPv6 multicast, or raw IEEE 802.3), and the handler accepts a Delay_Resp from any sender as long as the port is a time receiver using the end-to-end delay mechanism and the message echoes the port identity and a pending sequence id — both of which the victim itself broadcasts in its Delay_Req. Any node on the same link can therefore inject a single crafted Delay_Resp, or simply become the time transmitter and advertise the bogus interval.
Once the delay timer is armed with a zero timeout, the cooperative PTP thread re-arms and retransmits a Delay_Req on every tick. Each transmission takes a buffer from the fixed CONFIG_PTP_MSG_POLL_SIZE message slab (default 10) and holds it on port->delay_req_list for three seconds, so the slab is emptied within milliseconds and ptp_msg_alloc() then blocks with K_FOREVER inside the only thread that frees those buffers — permanently stalling time synchronization until reboot. Where a transmit-timestamp callback on another thread keeps recycling buffers, the result is instead a sustained multicast Delay_Req flood and continuous CPU consumption. There is no memory corruption and no disclosure of data; the impact is availability of the PTP subsystem and of the local network segment.
The fix rejects intervals outside a representable range and treats 0x7F as "not applicable" as required by IEEE 1588-2019 Table 42. The equivalent unchecked adoption of logMessageInterval from Sync messages in port_sync_msg_process(), a weaker variant of the same issue, is fixed by the companion change 334bf57f416f (#118150), which applies the same range check, ignores the field for unicast Sync messages and treats 0x7F as not applicable. |
| NLTK before 3.10.4 contains a quadratic-time denial of service vulnerability in ConllCorpusReader._get_srl_instances that allows remote attackers to exhaust CPU through nested span rescans. Attackers can supply a crafted CoNLL SRL corpus with many predicates and span columns, placing the head span last, to pin a core for minutes. |
| NLTK before 3.10.4 contains a denial of service vulnerability in Tree.chomsky_normal_form that allows remote attackers to exhaust CPU through quadratic-time right-factor binarization using list.pop(0). Attackers can supply a wide flat treebank tree parsed by Tree.fromstring to force tens of seconds of single-threaded CPU consumption, blocking the processing thread. |
| NLTK before 3.10.4 contains a denial of service vulnerability in the CCG lexicon parser fromstring that allows remote attackers to exhaust CPU by supplying wide inputs. Attackers can submit lexicon text with long flat bracket bodies or operator chains, triggering quadratic string re-slicing in matchBrackets and augParseCategory that blocks worker threads. |
| NLTK before 3.10.4 contains an uncontrolled resource consumption vulnerability in SteppingRecursiveDescentParser.parse() that lacks any max_time deadline or step limit. Attackers influencing the grammar can supply an ambiguous self-embedding grammar and short token input to force unbounded top-down search, pinning CPU cores and exhausting worker pools. |
| Coder 2.21.0 before 2.29.24, 2.30.0 before 2.34.16, 2.35.0 before 2.36.11, 2.37.0 before 2.37.8, and 2.38.0 before 2.38.4 reads Web Push endpoint responses in webpushSend with io.ReadAll, without a size limit or client timeout. Any authenticated user can register a subscription via POST /api/v2/users/{user}/webpush/subscription pointing to a server returning an endless body, exhausting coderd memory and crashing the API, dashboard, and workspace connections. |
| FrankenPHP before 1.13.2 contains a resource exhaustion vulnerability that allows unauthenticated clients to tie up PHP threads because queued requests are not cancelled when clients disconnect. Attackers can send many requests and close connections immediately, forcing handleRequestWithRegularPHPThreads and worker handlers to execute them and delay all clients sharing the thread pool. |
| fulgur converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. From version 0.4.4 to before version 0.29.0, the CSS string-set named-string values resolved from a document were accumulated per element with no memory budget, letting a small crafted document amplify into large retained memory (and the CPU to copy it) — results in a denial of service. This issue has been patched in version 0.29.0. |
| proxygen's HTTP/3 codec buffered an incomplete non-DATA frame, such as a control-stream frame, a frame of an unknown or reserved type, or a HEADERS frame, until its entire declared length had arrived, without limiting that length, and re-scanned all buffered data each time more bytes arrived. A remote, unauthenticated HTTP/3 peer could declare a very large frame and deliver it slowly, causing unbounded memory growth and CPU usage that grows quadratically with the number of fragments, leading to denial of service. This issue affects proxygen versions prior to v2026.11.09.00. |
| fulgur converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. From version 0.15.0 to before version 0.27.0, resolving the CSS counters(name, sep) function in generated content was bounded neither in the size of a single expansion nor in the aggregate work across an element tree. An attacker able to submit HTML/CSS to a fulgur-based conversion service can trigger CPU and memory exhaustion with a trivially small payload, denying service to the host and any co-tenants. This issue has been patched in version 0.27.0. |
| fulgur converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. From version 0.6.0 to before version 0.33.0, quadratic style-list reprocessing during containing-block resolution for absolutely-positioned pseudo-elements cause denial of service. This issue has been patched in version 0.33.0. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, a remote attacker can trigger an uncontrolled recursion and stack overflow in the default server application of bacnet-stack by abusing the Channel object. This issue has been patched in versions 1.4.4 and 1.5.1. |
| Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.10, matching a developer-authored selector that places the general sibling combinator inside :has() repeatedly scans each candidate element's following siblings when the right-hand side is absent, producing quadratic work on attacker-controlled HTML. Applications that evaluate a fixed selector such as div:has(a ~ b) over untrusted markup can have a worker occupied for minutes by a small document, while the adjacent sibling form and trusted-only document processing are not affected in the same way. This issue is fixed in version 2.10. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. Prior to 2.25.3, the Loofah HTML5 sanitizer checks href and xlink:href on elements in SVG_ALLOW_LOCAL_HREF with a regular expression whose line anchor and newline-matching whitespace cause an all-whitespace value to be rescanned from every line start. An attacker can submit an SVG reference element with a long multiline-whitespace attribute and consume CPU quadratically during sanitization. CRuby 3.1 and earlier and JRuby are affected, while CRuby 3.2 and later uses linear-time regular-expression matching. The default safelist reaches the vulnerable check without a configuration change. This issue is fixed in version 2.25.3. |
| A flaw was found in glib-networking. When establishing connections using Transport Layer Security (TLS) version 1.3, the client-side session cache does not limit the number of session tickets retained for a single host. A malicious server can exploit this by sending excessive session ticket messages, causing the client application to continuously consume memory. This unbounded memory growth can exhaust system memory, resulting in a Denial of Service (DoS). |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |