| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kamailio is an open source implementation of a SIP Signaling Server. Prior to 6.0.5 and 5.8.7, an out-of-bounds read in the auth module of Kamailio (formerly OpenSER and SER) allows remote attackers to cause a denial of service (process crash) via a specially crafted SIP packet if a successful user authentication without a database backend is followed by additional user identity checks. This vulnerability is fixed in 6.0.5 and 5.8.7. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| An out-of-bounds read vulnerability has been identified in the asComSvc service. This vulnerability can be triggered by sending specially crafted requests, which may lead to a service crash or partial loss of functionality. This vulnerability only affects ASUS motherboard series products. Refer to the 'Security Update for Armoury Crate App' section on the ASUS Security Advisory for more information. |
| An Out-Of-Bounds Read vulnerability affecting the PAR file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted PAR file. |
| A vulnerability has been identified in NX (All versions < V2406.3000). The affected applications contains an out of bounds read vulnerability while parsing specially crafted PRT files. This could allow an attacker to crash the application or execute code in the context of the current process. |
| OpenZeppelin Contracts is a library for secure smart contract development. Starting in version 5.2.0 and prior to version 5.4.0, the `lastIndexOf(bytes,byte,uint256)` function of the `Bytes.sol` library may access uninitialized memory when the following two conditions hold: 1) the provided buffer length is empty (i.e. `buffer.length == 0`) and position is not `2**256 - 1` (i.e. `pos != type(uint256).max`). The `pos` argument could be used to access arbitrary data outside of the buffer bounds. This could lead to the operation running out of gas, or returning an invalid index (outside of the empty buffer). Processing this invalid result for accessing the `buffer` would cause a revert under normal conditions. When triggered, the function reads memory at offset `buffer + 0x20 + pos`. If memory at that location (outside the `buffer`) matches the search pattern, the function would return an out of bound index instead of the expected `type(uint256).max`. This creates unexpected behavior where callers receive a valid-looking index pointing outside buffer bounds. Subsequent memory accesses that don't check bounds and use the returned index must carefully review the potential impact depending on their setup. Code relying on this function returning `type(uint256).max` for empty buffers or using the returned index without bounds checking could exhibit undefined behavior. Users should upgrade to version 5.4.0 to receive a patch. |
| DjVuLibre is a GPL implementation of DjVu, a web-centric format for distributing documents and images. Prior to version 3.5.29, the MMRDecoder::scanruns method is affected by an OOB-write vulnerability, because it does not check that the xr pointer stays within the bounds of the allocated buffer. This can lead to writes beyond the allocated memory, resulting in a heap corruption condition. An out-of-bounds read with pr is also possible for the same reason. This issue has been patched in version 3.5.29. |
| An Out-of-bounds Read vulnerability exists within the parsing of PRJ files. The issues result from the lack of proper validation of user-supplied data, which can result in different memory corruption issues within the application, such as reading and writing past the end of allocated data structures. |
| SAP NetWeaver Application Server ABAP (BIC Document) allows an authenticated attacker to craft a request that, when submitted to a BIC Document application, could cause a memory corruption error. On successful exploitation, this results in the crash of the target component. Multiple submissions can make the target completely unavailable. A similarly crafted submission can be used to perform an out-of-bounds read operation as well, revealing sensitive information that is loaded in memory at that time. There is no ability to modify any information. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix out of bounds memory read error in symlink repair
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that. |
| Trusted Firmware-A (TF-A) before 2.10 has a potential read out-of-bounds in the SDEI service. The input parameter passed in register x1 is not validated well enough in the function sdei_interrupt_bind. The parameter is passed to a call to plat_ic_get_interrupt_type. It can be any arbitrary value passing checks in the function plat_ic_is_sgi. A compromised Normal World (Linux kernel) can enable a root-privileged attacker to issue arbitrary SMC calls. Using this primitive, he can control the content of registers x0 through x6, which are used to send parameters to TF-A. Out-of-bounds addresses can be read in the context of TF-A (EL3). Because the read value is never returned to non-secure memory or in registers, no leak is possible. An attacker can still crash TF-A, however. |
| Out of bounds read in OpenBMC Firmware for some Intel(R) Server Platforms before versions egs-1.15-0, bhs-0.27 may allow a privileged user to potentially enable information disclosure via local access. |
| MicroDicom DICOM Viewer is vulnerable to an out-of-bounds read which may allow an attacker to cause memory corruption within the application. The user must open a malicious DCM file for exploitation. |
| Out-of-bounds read for some Intel(R) PROSet/Wireless WiFi Software for Windows before version 23.160 within Ring 2: Device Drivers may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| In KDE Connect before 1.33.0 on Android, a packet can be crafted that causes two paired devices to unpair. Specifically, it is an invalid discovery packet sent over broadcast UDP. |
| OpenRazer is an open source driver and user-space daemon to control Razer device lighting and other features on GNU/Linux. By writing specially crafted data to the `matrix_custom_frame` file, an attacker can cause the custom kernel driver to read more bytes than provided by user space. This data will be written into the RGB arguments which will be sent to the USB device. This issue has been patched in v3.10.2. |
| Fuji Electric Smart Editor is vulnerable to an out-of-bounds read, which may allow an attacker to execute arbitrary code. |
| Subnet Solutions PowerSYSTEM Center's SMTPS notification service can be affected by importing an EC certificate with crafted F2m parameters, which can lead to excessive CPU consumption during the evaluation of the curve parameters. |
|
A potential vulnerability were reported in the BIOS of some Desktop, Smart Edge, and ThinkStation products that could allow a local attacker with elevated privileges to write to NVRAM variables.
|