| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even
when the alloc_tag_cttype is not allocated because:
1) alloc tagging is disabled because mem profiling is disabled
(!alloc_tag_cttype)
2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype)
3) alloc tagging is enabled, but failed initialization
(!alloc_tag_cttype or IS_ERR(alloc_tag_cttype))
In all cases, alloc_tag_cttype is not allocated, and therefore
alloc_tag_top_users() should not attempt to acquire the semaphore.
This leads to a crash on memory allocation failure by attempting to
acquire a non-existent semaphore:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df]
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY
Tainted: [D]=DIE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:down_read_trylock+0xaa/0x3b0
Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff
RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016
RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000
RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070
RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1
R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37
R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000
FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
codetag_trylock_module_list+0xd/0x20
alloc_tag_top_users+0x369/0x4b0
__show_mem+0x1cd/0x6e0
warn_alloc+0x2b1/0x390
__alloc_frozen_pages_noprof+0x12b9/0x21a0
alloc_pages_mpol+0x135/0x3e0
alloc_slab_page+0x82/0xe0
new_slab+0x212/0x240
___slab_alloc+0x82a/0xe00
</TASK>
As David Wang points out, this issue became easier to trigger after commit
780138b12381 ("alloc_tag: check mem_profiling_support in alloc_tag_init").
Before the commit, the issue occurred only when it failed to allocate and
initialize alloc_tag_cttype or if a memory allocation fails before
alloc_tag_init() is called. After the commit, it can be easily triggered
when memory profiling is compiled but disabled at boot.
To properly determine whether alloc_tag_init() has been called and its
data structures initialized, verify that alloc_tag_cttype is a valid
pointer before acquiring the semaphore. If the variable is NULL or an
error value, it has not been properly initialized. In such a case, just
skip and do not attempt to acquire the semaphore.
[harry.yoo@oracle.com: v3] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init()
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
If 'ep' is NULL, result of ep_to_cdns3_ep(ep) is invalid pointer
and its dereference with priv_ep->cdns3_dev may cause panic.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci_plat_remove: avoid NULL dereference
Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host:
xhci-plat: omit shared hcd if either root hub has no ports")
xhci->shared_hcd can be NULL, which causes the following Oops
on reboot:
[ 710.124450] systemd-shutdown[1]: Rebooting.
[ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4
[ 710.304217] usb usb3: USB disconnect, device number 1
[ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered
[ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1
[ 710.328401] usb usb2: USB disconnect, device number 1
[ 710.333515] usb 2-3: USB disconnect, device number 2
[ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered
[ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8
[ 710.484425] Mem abort info:
[ 710.487265] ESR = 0x0000000096000004
[ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits
[ 710.496427] SET = 0, FnV = 0
[ 710.499525] EA = 0, S1PTW = 0
[ 710.502716] FSC = 0x04: level 0 translation fault
[ 710.507648] Data abort info:
[ 710.510577] ISV = 0, ISS = 0x00000004
[ 710.514462] CM = 0, WnR = 0
[ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000
[ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000
[ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6
[ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1
[ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022
[ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 710.597949] pc : usb_remove_hcd+0x34/0x1e4
[ 710.602067] lr : xhci_plat_remove+0x74/0x140
[ 710.606351] sp : ffff800009f3b7c0
[ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000
[ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000
[ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800
[ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff
[ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c
[ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0
[ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4
[ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001
[ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000
[ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000
[ 710.681251] Call trace:
[ 710.683704] usb_remove_hcd+0x34/0x1e4
[ 710.687467] xhci_plat_remove+0x74/0x140
[ 710.691400] platform_remove+0x34/0x70
[ 710.695165] device_remove+0x54/0x90
[ 710.698753] device_release_driver_internal+0x200/0x270
[ 710.703992] device_release_driver+0x24/0x30
[ 710.708273] bus_remove_device+0xe0/0x16c
[ 710.712293] device_del+0x178/0x390
[ 710.715797] platform_device_del.part.0+0x24/0x90
[ 710.720514] platform_device_unregister+0x30/0x50
[ 710.725232] dwc3_host_exit+0x20/0x30
[ 710.728907] dwc3_remove+0x174/0x1b0
[ 710.732494] platform_remove+0x34/0x70
[ 710.736254] device_remove+0x54/0x90
[ 710.739840] device_release_driver_internal+0x200/0x270
[ 710.745078] device_release_driver+0x24/0x30
[ 710.749359] bus_remove_device+0xe0/0x16c
[ 710.753380] device_del+0x178/0x390
[ 710.756881] platform_device_del.part
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: only dirty folios when data journaling regular files
fstest generic/388 occasionally reproduces a crash that looks as
follows:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
ext4_block_zero_page_range+0x30c/0x380 [ext4]
ext4_truncate+0x436/0x440 [ext4]
ext4_process_orphan+0x5d/0x110 [ext4]
ext4_orphan_cleanup+0x124/0x4f0 [ext4]
ext4_fill_super+0x262d/0x3110 [ext4]
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x26/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4ed/0x6b0
do_syscall_64+0x82/0x170
...
This occurs when processing a symlink inode from the orphan list. The
partial block zeroing code in the truncate path calls
ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls
mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an
a_ops vector in ext4, hence the crash.
To avoid this problem, update the ext4_dirty_journalled_data() helper to
only mark the folio dirty on regular files (for which a_ops is
assigned). This also matches the journaling logic in the ext4_symlink()
creation path, where ext4_handle_dirty_metadata() is called directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
Search result of avs_dai_find_path_template() shall be verified before
being used. As 'template' is already known when
avs_hw_constraints_init() is fired, drop the search entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor()
The function mt7996_set_monitor() dereferences phy before
the NULL sanity check.
Fix this to avoid NULL pointer dereference by moving the
dereference after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix potential NULL dereference in __kernfs_remove
When lockdep is enabled, lockdep_assert_held_write would
cause potential NULL pointer dereference.
Fix the following smatch warnings:
fs/kernfs/dir.c:1353 __kernfs_remove() warn: variable dereferenced before check 'kn' (see line 1346) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:
BUG: kernel NULL pointer dereference, address: 0000000000000024
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:get_event_field.isra.0+0x0/0x50
Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
Call Trace:
<TASK>
get_eprobe_size+0xb4/0x640
? __mod_node_page_state+0x72/0xc0
__eprobe_trace_func+0x59/0x1a0
? __mod_lruvec_page_state+0xaa/0x1b0
? page_remove_file_rmap+0x14/0x230
? page_remove_rmap+0xda/0x170
event_triggers_call+0x52/0xe0
trace_event_buffer_commit+0x18f/0x240
trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
try_to_wake_up+0x260/0x4c0
__wake_up_common+0x80/0x180
__wake_up_common_lock+0x7c/0xc0
do_notify_parent+0x1c9/0x2a0
exit_notify+0x1a9/0x220
do_exit+0x2ba/0x450
do_group_exit+0x2d/0x90
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Obviously this is not the desired result.
Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix dummy res NULL ptr deref bug
Check the bo->resource value before accessing the resource
mem_type.
v2: Fix commit description unwrapped warning
<log snip>
[ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
[ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
[ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1
[ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
[ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm]
[ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58
[ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202
[ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b
[ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010
[ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000
[ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110
[ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208
[ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000
[ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0
[ 40.214469][ T184] Call Trace:
[ 40.214974][ T184] <TASK>
[ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm]
[ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240
[ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm]
[ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm]
[ 40.219410][ T184] ? shmem_get_inode+0x744/0x980
[ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm]
[ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper]
[ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm]
[ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0
[ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280
[ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper]
[ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper]
[ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180
[ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper]
[ 40.238864][ T184] ? local_pci_probe+0xdf/0x180
[ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper]
[ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm]
[ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm]
[ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm]
[ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper]
[ 40.245226][ T184] ? __cond_resched+0x1c/0xc0
[ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper]
[ 40.247316][ T184] ? mutex_unlock+0x80/0x100
[ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0
[ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper]
[ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper]
[ 40.251540][ T184] ? __cond_resched+0x1c/0xc0
[ 40.252321][ T184] ? mutex_lock+0x9f/0x100
[ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper]
[ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper]
[ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper]
[ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs]
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
The bpf_sys_bpf() helper function allows an eBPF program to load another
eBPF program from within the kernel. In this case the argument union
bpf_attr pointer (as well as the insns and license pointers inside) is a
kernel address instead of a userspace address (which is the case of a
usual bpf() syscall). To make the memory copying process in the syscall
work in both cases, bpfptr_t was introduced to wrap around the pointer
and distinguish its origin. Specifically, when copying memory contents
from a bpfptr_t, a copy_from_user() is performed in case of a userspace
address and a memcpy() is performed for a kernel address.
This can lead to problems because the in-kernel pointer is never checked
for validity. The problem happens when an eBPF syscall program tries to
call bpf_sys_bpf() to load a program but provides a bad insns pointer --
say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf()
which would then call bpf_prog_load() to load the program.
bpf_prog_load() is responsible for copying the eBPF instructions to the
newly allocated memory for the program; it creates a kernel bpfptr_t for
insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t
operations are backed by the corresponding sockptr_t operations, which
performs direct memcpy() on kernel pointers for copy_from/strncpy_from
operations. Therefore, the code is always happy to dereference the bad
pointer to trigger a un-handle-able page fault and in turn an oops.
However, this is not supposed to happen because at that point the eBPF
program is already verified and should not cause a memory error.
Sample KASAN trace:
[ 25.685056][ T228] ==================================================================
[ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30
[ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228
[ 25.686732][ T228]
[ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7
[ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
[ 25.687991][ T228] Call Trace:
[ 25.688223][ T228] <TASK>
[ 25.688429][ T228] dump_stack_lvl+0x73/0x9e
[ 25.688747][ T228] print_report+0xea/0x200
[ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.689401][ T228] ? _printk+0x54/0x6e
[ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0
[ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.690412][ T228] kasan_report+0xb5/0xe0
[ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0
[ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691734][ T228] memcpy+0x25/0x60
[ 25.692000][ T228] copy_from_bpfptr+0x21/0x30
[ 25.692328][ T228] bpf_prog_load+0x604/0x9e0
[ 25.692653][ T228] ? cap_capable+0xb4/0xe0
[ 25.692956][ T228] ? security_capable+0x4f/0x70
[ 25.693324][ T228] __sys_bpf+0x3af/0x580
[ 25.693635][ T228] bpf_sys_bpf+0x45/0x240
[ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd
[ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0
[ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0
[ 25.695144][ T228] bpf_prog_test_run+0x172/0x190
[ 25.695487][ T228] __sys_bpf+0x2c5/0x580
[ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50
[ 25.696084][ T228] do_syscall_64+0x60/0x90
[ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60
[ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0
[ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40
[ 25.697586][ T228] ? do_syscall_64+0x6e/0x90
[ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 25.698312][ T228] RIP: 0033:0x7f6d543fb759
[ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix panic in failed foilio allocation
commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit
9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of
pages") save -ENOMEM in the folio array upon allocation failure and call
the folio array free code.
The folio array free code expects either valid folio pointers or NULL.
Finding the -ENOMEM will result in a panic. Fix by NULLing the error
folio entry. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Guard Possible Null Pointer Dereference
[WHY]
In some situations, dc->res_pool may be null.
[HOW]
Check if pointer is null before dereference. |
| A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
File Station 5 5.5.6.5018 and later |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix alloc->vma_vm_mm null-ptr dereference
Syzbot reported a couple issues introduced by commit 44e602b4e52f
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.
This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].
Sample of syzbot's crash report:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
syz-executor229[3755] cmdline: ./syz-executor2294415195
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
[...]
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5666 [inline]
lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
down_read+0x98/0x450 kernel/locking/rwsem.c:1499
mmap_read_lock include/linux/mmap_lock.h:117 [inline]
binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
==================================================================
Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.
[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: mcq: Add NULL check in ufshcd_mcq_abort()
A race can occur between the MCQ completion path and the abort handler:
once a request completes, __blk_mq_free_request() sets rq->mq_hctx to
NULL, meaning the subsequent ufshcd_mcq_req_to_hwq() call in
ufshcd_mcq_abort() can return a NULL pointer. If this NULL pointer is
dereferenced, the kernel will crash.
Add a NULL check for the returned hwq pointer. If hwq is NULL, log an
error and return FAILED, preventing a potential NULL-pointer
dereference. As suggested by Bart, the ufshcd_cmd_inflight() check is
removed.
This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
This is found by our static analysis tool KNighter. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected
When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.
The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.
Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa(). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
A null pointer dereference can happen when attempting to access the
"gsm->receive()" function in gsmld_receive_buf(). Currently, the code
assumes that gsm->recieve is only called after MUX activation.
Since the gsmld_receive_buf() function can be accessed without the need to
initialize the MUX, the gsm->receive() function will not be set and a
NULL pointer dereference will occur.
Fix this by avoiding the call to "gsm->receive()" in case the function is
not initialized by adding a sanity check.
Call Trace:
<TASK>
gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861
tiocsti drivers/tty/tty_io.c:2293 [inline]
tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd |