| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix memory leaks in rxkad_verify_response()
Fix rxkad_verify_response() to free the ticket and the server key under all
circumstances by initialising the ticket pointer to NULL and then making
all paths through the function after the first allocation has been done go
through a single common epilogue that just releases everything - where all
the releases skip on a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix memory leak in amdgpu_ras_init()
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added
a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done
in gss_release_msg(), but forgot to add a corresponding kref_put()
on the error path when kstrdup_const() fails.
If service_name is non-NULL and kstrdup_const() fails, the function
jumps to err_put_pipe_version which calls put_pipe_version() and
kfree(gss_msg), but never releases the gss_auth reference. This leads
to a kref leak where the gss_auth structure is never freed.
Add a forward declaration for gss_free_callback() and call kref_put()
in the err_put_pipe_version error path to properly release the
reference taken earlier. |
| A flaw was found in the SAML XML processing component of Keycloak, an open-source identity and access management solution. The issue occurs when the server parses XML documents containing excessively long dateTime or duration values. Because these strings are not properly validated before processing, the XML parser consumes excessive CPU time. An unauthenticated remote attacker can exploit this by sending specially crafted SAML requests to the server, leading to high CPU utilization and a denial of service for all users. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: don't flood a cancelling task with task_work
io_ring_exit_work() asks each task which has used the ring to remove its
tctx node, by task_work, and repeats that until the list is empty.
io_tctx_exit_cb() doesn't touch the node while the task is in
io_uring_cancel_generic(), which removes all the nodes at its end. So the
work item queues the callback again as soon as it has completed, for
nothing.
That is more than a waste of time. task_work_run() only returns when it
finds the list empty. If the rings are released from inside the
cancellation, because requests of other rings held the last references to
their files, up to 64 work items keep sending callbacks to the one task
which is running them. It never finds the list empty, never gets back to
the cancellation, the nodes stay, and so it goes on: a task with 60 pairs
of rings which poll each other ran 280000 callbacks in 5 seconds, 20
seconds after exit_group(). It ends when all the senders happen to be late
at the same time. Until then the task keeps a CPU and the work items busy.
An exiting task can't be killed meanwhile. execve() cancels the requests in
the same way, so a live task can get stuck there as well, for minutes. If
it takes more than five, the work items run into the
WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No
privilege is needed for any of this.
If the callback has met a task in cancellation, wait a little before it is
sent again. Nobody has to wake the work item up for that: either the node
is gone by then, or it is the turn of the next round. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in silviucpp ezstd allows an attacker who supplies a zstd frame to ezstd:decompress_using_ddict/2 to exhaust memory and terminate the Erlang VM via a small frame that declares a very large content size.
zstd_nif_decompress_using_ddict in c_src/ezstd_nif.cc reads the frame's declared content size with ZSTD_getFrameContentSize and passes it directly to enif_make_new_binary, without the 1 GiB MAX_BUFFER_SIZE check that ezstd:decompress/1 applies before allocating. A valid 65,550-byte frame of RLE blocks declaring 2 GiB is rejected by ezstd:decompress/1 but is fully allocated and decompressed by the dictionary path. The allocation happens inside a NIF, so when it exceeds the memory available to the VM the operating system kills the whole node rather than the calling process.
This issue affects ezstd: from 1.0.5 before 1.2.5. |
| In getPreferredSize of LauncherProcessImageListener.kt, there is a possible denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onHeaderDecoded of LocalImageResolver.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix memory leaks in gfs2_fill_super error path
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_ext_shift_extents()
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc()
In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,
the function returns directly without releasing the allocated xcc_info,
resulting in a memory leak.
Fix this by ensuring that xcc_info is properly freed in the error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |