| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
This report reveals it:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Co
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: fujitsu: fix potential null-ptr-deref
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure. |
| NULL-pointer dereference vulnerabilities in Aqara Hub M2 4.3.6_0027, Hub M3 4.3.6_0025, and Camera Hub G3 4.1.9_0027 in the JSON processing enable denial-of-service attacks through malformed JSON inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: Add NULL check in udma_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: Fix potential null-ptr-deref in mlb_usio_probe()
devm_ioremap() can return NULL on error. Currently, mlb_usio_probe()
does not check for this case, which could result in a NULL pointer
dereference.
Add NULL check after devm_ioremap() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600
Call Trace:
jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline]
jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118
jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253
jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167
jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362
jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302
generic_perform_write+0x2c2/0x500 mm/filemap.c:3347
__generic_file_write_iter+0x252/0x610 mm/filemap.c:3465
generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497
call_write_iter include/linux/fs.h:2039 [inline]
do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740
do_iter_write+0x18c/0x710 fs/read_write.c:866
vfs_writev+0x1db/0x6a0 fs/read_write.c:939
do_pwritev fs/read_write.c:1036 [inline]
__do_sys_pwritev fs/read_write.c:1083 [inline]
__se_sys_pwritev fs/read_write.c:1078 [inline]
__x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Disable interrupts before resetting the GPU
Currently, an interrupt can be triggered during a GPU reset, which can
lead to GPU hangs and NULL pointer dereference in an interrupt context
as shown in the following trace:
[ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 314.043822] Mem abort info:
[ 314.046606] ESR = 0x0000000096000005
[ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits
[ 314.055651] SET = 0, FnV = 0
[ 314.058695] EA = 0, S1PTW = 0
[ 314.061826] FSC = 0x05: level 1 translation fault
[ 314.066694] Data abort info:
[ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000
[ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1
[ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d]
[ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d]
[ 314.160198] sp : ffffffc080003ea0
[ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000
[ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0
[ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000
[ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000
[ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000
[ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001
[ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874
[ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180
[ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb
[ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 314.234807] Call trace:
[ 314.237243] v3d_irq+0xec/0x2e0 [v3d]
[ 314.240906] __handle_irq_event_percpu+0x58/0x218
[ 314.245609] handle_irq_event+0x54/0xb8
[ 314.249439] handle_fasteoi_irq+0xac/0x240
[ 314.253527] handle_irq_desc+0x48/0x68
[ 314.257269] generic_handle_domain_irq+0x24/0x38
[ 314.261879] gic_handle_irq+0x48/0xd8
[ 314.265533] call_on_irq_stack+0x24/0x58
[ 314.269448] do_interrupt_handler+0x88/0x98
[ 314.273624] el1_interrupt+0x34/0x68
[ 314.277193] el1h_64_irq_handler+0x18/0x28
[ 314.281281] el1h_64_irq+0x64/0x68
[ 314.284673] default_idle_call+0x3c/0x168
[ 314.288675] do_idle+0x1fc/0x230
[ 314.291895] cpu_startup_entry+0x3c/0x50
[ 314.295810] rest_init+0xe4/0xf0
[ 314.299030] start_kernel+0x5e8/0x790
[ 314.302684] __primary_switched+0x80/0x90
[ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017)
[ 314.312775] ---[ end trace 0000000000000000 ]---
[ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 314.324249] SMP: stopping secondary CPUs
[ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000
[ 314.334076] PHYS_OFFSET: 0x0
[ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b
[ 314.342337] Memory Limit: none
[ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Before resetting the G
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null pointer check for get_first_active_display()
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions from 8.0.0 to before 8.0.2, a NULL dereference can occur when the entropy keyword is used in conjunction with base64_data. This issue has been patched in version 8.0.2. A workaround involves disabling rules that use entropy in conjunction with base64_data. |
| Null pointer dereference in add_ca_certs() in Cesanta Mongoose before 7.2 allows remote attackers to cause a denial of service via TLS initialization where SSL_CTX_get_cert_store() returns NULL. |
| A NULL pointer dereference vulnerability in the util.readFileIntoStream component of PDF-XChange Editor v10.7.3.401 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A NULL pointer dereference vulnerability in the importDataObject() function of PDF-XChange Editor v10.7.3.401 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| An issue was discovered in AnyDesk for Windows before 9.0.5, AnyDesk for macOS before 9.0.1, AnyDesk for Linux before 7.0.0, AnyDesk for iOS before 7.1.2, and AnyDesk for Android before 8.0.0. Remote Denial of Service can occur because of incorrect deserialization that results in failed memory allocation and a NULL pointer dereference. |
| An issue was discovered in Camera in Samsung Mobile Processor Exynos 1280 and 2200. Unnecessary registration of a hardware IP address in the Camera device driver can lead to a NULL pointer dereference, resulting in a denial of service. |
| Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy crashes when JWT authentication is configured with the remote JWKS fetching, allow_missing_or_failed is enabled, multiple JWT tokens are present in the request headers and the JWKS fetch fails. This is caused by a re-entry bug in the JwksFetcherImpl. When the first token's JWKS fetch fails, onJwksError() callback triggers processing of the second token, which calls fetch() again on the same fetcher object. The original callback's reset() then clears the second fetch's state (receiver_ and request_) which causes a crash when the async HTTP response arrives. |
| Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.1.5 and 1.0.2, there is a nil pointer dereference vulnerability in the Omni Resource Service allows unauthenticated users to cause a server panic and denial of service by sending empty create/update resource requests through the API endpoints. The vulnerability exists in the isSensitiveSpec function which calls grpcomni.CreateResource without checking if the resource's metadata field is nil. When a resource is created with an empty Metadata field, the CreateResource function attempts to access resource.Metadata.Version causing a segmentation fault. This vulnerability is fixed in 1.1.5 and 1.0.2. |
| The gmp plugin in strongSwan before 5.6.0 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted RSA signature. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Add checks for devm_kcalloc
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val
In order to fix a possible NULL pointer dereference in
mt7996_mac_write_txwi() of vif pointer, export
mt76_connac2_mac_tx_rate_val utility routine and reuse it
in mt7996 driver. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus_core) Fix NULL pointer dereference
Pass i2c_client to _pmbus_is_enabled to drop the assumption
that a regulator device is passed in.
This will fix the issue of a NULL pointer dereference when called from
_pmbus_get_flags. |