Export limit exceeded: 430582 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430582 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99696 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after defragmenting a bucket ocfs2_xattr_set_entry_bucket() hands loc.xl_entry to ocfs2_xa_set() twice: once for the bucket as it stands, and, if that reports -ENOSPC, once more after ocfs2_defrag_xattr_bucket() has packed the name/value pairs down. Defragmenting ends by sorting the entry array on xe_name_hash. Buckets are kept sorted, so the sort only permutes entries that share a hash, but lib/sort.c is an unstable heapsort and it does permute them. loc.xl_entry is an address inside xh_entries[], so afterwards it denotes whichever entry landed in that slot rather than the one the search found. The second ocfs2_xa_set() then works on the wrong entry. Nothing on that path compares the entry's name with xi->xi_name, so what happens depends on how the two entries compare in size: ocfs2_xa_reuse_entry() trips its BUG_ON() when the padded name sizes differ, and otherwise the new value is written into the neighbouring attribute's value slot while the attribute being set is left untouched. setxattr() reports success either way. Remember the entry's hash before defragmenting and look the entry up again afterwards, the way ocfs2_xattr_bucket_find() does. An entry that cannot be found again means the bucket no longer holds what the search found, so fail with -EFSCORRUPTED rather than writing through the stale pointer. | ||||
| CVE-2026-99698 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of CMA areas reserved at a fixed address CMA areas allocated from memblock have their memory accepted by memblock_alloc_range_nid(), but areas reserved at a fixed address with memblock_reserve() are not. If a fixed CMA area is requested by the cma=<size>@<base> command line parameter, it may be in regular RAM and on TDX and SEV-SNP guests it must be accepted. Accept the memory of fixed CMA areas as well, so that all CMA areas are accepted regardless of how they were reserved. | ||||
| CVE-2026-99699 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of multi-range CMA areas Patch series "mm/cma: accept memory of CMA areas reserved with memblock_reserve()", v1. Pages of allocated CMA areas are released to the buddy allocator with __free_pages(), which does not check for unaccepted memory. This usually works because memblock accepts the memory it allocates. However, multi-range CMA areas, used by hugetlb_cma, and fixed CMA areas requested with cma=<size>@<base> are reserved with memblock_reserve() and their memory is never accepted. On TDX and SEV-SNP guests the first access to such a page is fatal. To ease the backporting, each case is addressed by a separate patch: - patch 1 accepts the memory of multi-range CMA areas - patch 2 does the same for the fixed CMA areas The second patch won't apply cleanly to 6.6 and 6.12, but I believe the stable team LLMs will take care of that :) This patch (of 2): On systems with unaccepted memory, memblock allocations accept the allocated range, but when cma_declare_contiguous_multi() uses open coded allocation of multiple ranges, it reserves them with memblock_reserve() and they are never accepted. These pages are released to the buddy allocator by cma_activate_area() with __free_pages() that does not check for unaccepted memory, so the first access to such a page in a TDX or SEV-SNP guest is fatal. Accept the memory of each range when it is reserved. | ||||
| CVE-2026-131244 | 1 Splunk | 1 Splunk | 2026-11-20 | 4.3 Medium |
| In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit and run playbooks could modify a child playbook callback handle associated with another playbook run, which could alter the callback behavior of that run. The vulnerability exists because the Playbook API does not verify that callback-handle updates belong to the related parent and child playbook runs. | ||||
| CVE-2026-131249 | 1 Splunk | 1 Splunk | 2026-11-20 | 4.3 Medium |
| In Splunk SOAR versions below 8.8.0, an authenticated user with permission to view, edit, and run playbooks and access to at least one container label could retrieve a callback handle from a playbook run outside the container-label scope granted to that account. The vulnerability is possible because Splunk SOAR does not verify that the requested callback handle belongs to the parent playbook run that launched the child playbook. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Data access automation API (https://help.splunk.com/en/splunk-soar/soar-on-premises/python-playbook-api-reference/8.8.0/automation-api/data-access-automation-api) in the Splunk documentation. | ||||
| CVE-2026-131254 | 1 Splunk | 1 Splunk | 2026-11-20 | 5.4 Medium |
| In Splunk SOAR versions below 8.8.0, a user with permission to create containers on one label could use the Representational State Transfer (REST) API to create a container with a parent relationship to a container that the user cannot access. This could let the user alter incident lineage across authorization boundaries and identify existing restricted containers. The vulnerability is possible because the REST API accepts a customer-supplied parent relationship when creating a container without authorizing access to the referenced container. For more information see REST Containers (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.6.0/container-endpoints/rest-containers) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. | ||||
| CVE-2026-131255 | 1 Splunk | 1 Splunk | 2026-11-20 | 7.5 High |
| In Splunk SOAR versions below 8.8.0, an unauthenticated user could gain administrator privileges through a user account that receives an unintended role. A user that holds a role with permission to create or modify users and assign roles must assign the target account a role with a numeric name through the user-management Representational State Transfer (REST) API. The vulnerability is possible because the API resolves a numeric role name as a role identifier instead of preserving the requested role name. | ||||
| CVE-2026-131256 | 1 Splunk | 1 Splunk | 2026-11-20 | 7.2 High |
| In Splunk SOAR versions below 8.8.0, an authenticated user that holds a role with the System Settings edit permission could execute arbitrary code on the host that runs Splunk SOAR. The vulnerability is possible because the Representational State Transfer (REST) API accepts package references from untrusted sources and passes them to the dependency installer. | ||||
| CVE-2026-131259 | 1 Splunk | 1 Splunk | 2026-11-20 | 5.4 Medium |
| In Splunk SOAR versions below 8.8.0, a user with permission to create and view containers for a label could use the Representational State Transfer (REST) API to create a container that references a workbook phase in a case the user cannot view, disclosing the phase name and creating an inconsistent phase association. The vulnerability exists because the Container REST API does not enforce the same case-scoped authorization when it accepts a workbook-phase reference during container creation. | ||||
| CVE-2026-131261 | 1 Splunk | 1 Splunk | 2026-11-20 | 8.8 High |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with the Apps edit permission could execute arbitrary code as the user account that runs Splunk SOAR by installing a malicious app. The vulnerability is possible because Splunk SOAR does not restrict app dependencies to validated binary packages before installing them. | ||||
| CVE-2026-131263 | 1 Splunk | 1 Splunk | 2026-11-20 | 8.8 High |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with only the apps:edit permission could install a connector app that causes Splunk SOAR to write attacker-controlled files outside the app directory. This could let the user modify files used by Splunk SOAR and execute arbitrary code as the user account that runs Splunk SOAR. The vulnerability is possible because Splunk SOAR constructs the dependency installation command from app-supplied metadata without preventing that metadata from changing its arguments. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Add and configure apps and assets to provide actions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.6.0/manage-your-splunk-soar-on-premises-apps-and-assets/add-and-configure-apps-and-assets-to-provide-actions-in-splunk-soar-on-premises) in the Splunk documentation. | ||||
| CVE-2026-131264 | 1 Splunk | 1 Splunk | 2026-11-20 | 6.3 Medium |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with the System Settings edit permission could cause Splunk SOAR to send the stored root credential for an external credential store to a host that the user controls. Depending on the configuration, the exposed credential could include an access token, application secret, account password, or client certificate. The vulnerability is possible because Splunk SOAR reuses the stored credential when the user changes the external credential store endpoint without supplying replacement credentials. | ||||
| CVE-2026-131178 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 7.6 High |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could craft a shared Classic Dashboard that runs arbitrary Search Processing Language (SPL) commands for another authenticated user. Exploitation requires the dashboard viewer to open the shared dashboard. The injected commands could access data available to the dashboard viewer, modify data available to the dashboard viewer, and partially disrupt Splunk Enterprise. For more information see Add sparklines to search results (https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.6/calculate-statistics/add-sparklines-to-search-results), Configure dashboard permissions (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/simple-xml-dashboards/10.6/manage-and-share-dashboards/configure-dashboard-permissions), and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation. | ||||
| CVE-2026-131181 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 7.1 High |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could use Data Model Acceleration to run malicious Search Processing Language (SPL) commands and perform actions through the Representational State Transfer (REST) API that the user cannot perform directly. The vulnerability is possible because Splunk Enterprise does not neutralize user-provided data before it adds that data to a generated search. For more information, see Accelerate data models (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.2/use-data-summaries-to-accelerate-searches/accelerate-data-models), Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities), and About the search language (https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.6/search-overview/about-the-search-language). | ||||
| CVE-2026-131183 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 5.4 Medium |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a low-privileged user who holds the "power" Splunk role could inject arbitrary Search Processing Language (SPL) commands into a Classic Dashboard search. When another user opens the affected dashboard in Splunk Web, those injected commands execute with the viewing user's permissions, potentially allowing the low-privileged user to access stored credentials and write data to indexes. The vulnerability is possible because Splunk Enterprise does not correctly escape user-supplied content when it rewrites a search, which lets the rewritten search include additional SPL commands. The vulnerability requires another user to open the dashboard in Splunk Web. Consequently, a user who holds the "power" Splunk role should not be able to exploit the vulnerability at will. For more information see SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation. | ||||
| CVE-2026-131184 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 6.4 Medium |
| In Splunk Enterprise versions below 10.6.1, 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a low-privileged user who does not hold the "admin" or "power" Splunk roles could inject a malicious script into the name of a private saved search. If another user subsequently enables, disables, or edits the corresponding platform alert in the Monitoring Console, the injected script executes within that user's browser session, potentially allowing the low-privileged user to view sensitive information or modify data in Splunk Enterprise. The vulnerability is possible because the Monitoring Console does not safely handle saved-search names in the platform alert workflow. For more information see Enable and configure platform alerts (https://help.splunk.com/en/splunk-enterprise/administer/monitor/10.4/configure-the-monitoring-console/enable-and-configure-platform-alerts) and About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation. | ||||
| CVE-2026-131186 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 6.5 Medium |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user that holds a role with the list_deployment_server capability could access sensitive information from inputs.conf files outside the intended deployment app directory through the Representational State Transfer (REST) API. The vulnerability is possible because the REST API does not restrict a deployment app name to an existing deployment app before reading input configurations. For more information see authorize.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.4-configuration-file-reference/authorize.conf), Deployment server architecture (https://help.splunk.com/en/splunk-enterprise/administer/update-your-deployment/9.0/deployment-server-and-forwarder-management/deployment-server-architecture), and inputs.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/9.4/configuration-file-reference/9.4.16-configuration-file-reference/inputs.conf) in the Splunk documentation. | ||||
| CVE-2026-131188 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 7.1 High |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, an unauthenticated user could craft a malicious link that, if opened by an authenticated user, executes arbitrary Search Processing Language (SPL) searches with the victim's permissions. Successful exploitation could allow the unauthenticated user to access or modify data, alter Splunk platform configurations, and disrupt operations available to the affected user. The vulnerability is possible because the Portable Document Format (PDF) generation component processes request data before it rejects deprecated GET requests and does not apply SPL safeguards for risky commands to subsearches. For more information see Generate PDFs of your reports and dashboards (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/10.4/report-management/generate-pdfs-of-your-reports-and-dashboards) and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation. | ||||
| CVE-2026-131191 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 4.3 Medium |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who does not hold the "admin" or "power" Splunk roles could read private index configuration values for other users through the deployment server Representational State Transfer (REST) API. The deployment server REST API does not limit a supplied repository location to configured deployment repositories before it reads indexes.conf stanzas. | ||||
| CVE-2026-131194 | 1 Splunk | 1 Splunk Enterprise | 2026-11-20 | 4.6 Medium |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a low-privileged user who holds the "power" Splunk role could inject malicious content into a Splunk Web view. When another authenticated user opens the affected view in Splunk Web, the injected content executes unauthorized JavaScript code within the viewing user's browser session. The vulnerability is possible because Splunk Web does not properly validate content in a view definition before rendering the view. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation. | ||||