| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix peer hash locking vs RCU callback
In its address list, afs now retains pointers to and refs on one or more
rxrpc_peer objects. The address list is freed under RCU and at this time,
it puts the refs on those peers.
Now, when an rxrpc_peer object runs out of refs, it gets removed from the
peer hash table and, for that, rxrpc has to take a spinlock. However, it
is now being called from afs's RCU cleanup, which takes place in BH
context - but it is just taking an ordinary spinlock.
The put may also be called from non-BH context, and so there exists the
possibility of deadlock if the BH-based RCU cleanup happens whilst the hash
spinlock is held. This led to the attached lockdep complaint.
Fix this by changing spinlocks of rxnet->peer_hash_lock back to
BH-disabling locks.
================================
WARNING: inconsistent lock state
6.13.0-rc5-build2+ #1223 Tainted: G E
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810babe228 (&rxnet->peer_hash_lock){+.?.}-{3:3}, at: rxrpc_put_peer+0xcb/0x180
{SOFTIRQ-ON-W} state was registered at:
mark_usage+0x164/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_peer_keepalive_worker+0x144/0x440
process_one_work+0x486/0x7c0
process_scheduled_works+0x73/0x90
worker_thread+0x1c8/0x2a0
kthread+0x19b/0x1b0
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
irq event stamp: 972402
hardirqs last enabled at (972402): [<ffffffff8244360e>] _raw_spin_unlock_irqrestore+0x2e/0x50
hardirqs last disabled at (972401): [<ffffffff82443328>] _raw_spin_lock_irqsave+0x18/0x60
softirqs last enabled at (972300): [<ffffffff810ffbbe>] handle_softirqs+0x3ee/0x430
softirqs last disabled at (972313): [<ffffffff810ffc54>] __irq_exit_rcu+0x44/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rxnet->peer_hash_lock);
<Interrupt>
lock(&rxnet->peer_hash_lock);
*** DEADLOCK ***
1 lock held by swapper/1/0:
#0: ffffffff83576be0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire+0x7/0x30
stack backtrace:
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G E 6.13.0-rc5-build2+ #1223
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x57/0x80
print_usage_bug.part.0+0x227/0x240
valid_state+0x53/0x70
mark_lock_irq+0xa5/0x2f0
mark_lock+0xf7/0x170
mark_usage+0xe1/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_put_peer+0xcb/0x180
afs_free_addrlist+0x46/0x90 [kafs]
rcu_do_batch+0x2d2/0x640
rcu_core+0x2f7/0x350
handle_softirqs+0x1ee/0x430
__irq_exit_rcu+0x44/0x110
irq_exit_rcu+0xa/0x30
sysvec_apic_timer_interrupt+0x7f/0xa0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: correct handling of extreme memory squeeze
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n
---truncated--- |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To manage the system, sysctl and platform operations are used by the
control domain or a possible Xenstore domain. Some of these operations
may not be executed in parallel, so a system-wide lock each is used.
The way those locks are acquired is, however, not providing any fairness.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking.
The sysctl issue is CVE-2026-62426.
The platform-op issue is CVE-2026-62427. |
| The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer).
The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path.
The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure.
The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock
that the timer callback also acquires, leading to an ABBA deadlock on
SMP systems.
For the output timer (iptfs_timer):
- iptfs_destroy_state() holds x->lock, calls hrtimer_cancel()
- iptfs_delay_timer() callback takes x->lock
For the drop timer (drop_timer):
- iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel()
- iptfs_drop_timer() callback takes drop_lock
Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq
context. When hrtimer_cancel() is called for a soft timer that is
currently executing on another CPU, hrtimer_cancel_wait_running() spins
on softirq_expiry_lock -- the same lock held by the softirq running the
callback. If the callback is blocked waiting for the spinlock held by
the caller of hrtimer_cancel(), a circular dependency forms:
CPU 0: holds lock_A -> waits for softirq_expiry_lock
CPU 1: holds softirq_expiry_lock -> waits for lock_A
Fix by calling hrtimer_cancel() before acquiring the respective locks.
hrtimer_cancel() is safe to call without holding any lock and will wait
for any in-progress callback to complete. For the output timer, the
lock is still acquired afterwards to drain the packet queue. For the
drop timer, the lock/unlock pair is removed entirely since it only
existed to serialize with the timer callback, which hrtimer_cancel()
already guarantees.
Found by source code audit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix held lock freed on hfsplus_fill_super()
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b
---truncated--- |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| In the Linux kernel, the following vulnerability has been resolved:
block: Prevent potential deadlocks in zone write plug error recovery
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones. |
| Metabase is data visualization software. Prior to versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6, it was possible to circumvent locked parameters when requesting data for a question in an embedded dashboard by constructing a malicious request to the backend. This issue is patched in versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, and 1.42.6. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
Following hung tasks:
[ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132
[ 77.028820] Call Trace:
[ 77.029027] schedule+0x8c/0x1b0
[ 77.029067] mutex_lock+0x50/0x60
[ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs]
[ 77.029117] __writeback_single_inode+0x43c/0x570
[ 77.029128] writeback_sb_inodes+0x259/0x740
[ 77.029148] wb_writeback+0x107/0x4d0
[ 77.029163] wb_workfn+0x162/0x7b0
[ 92.390442] task:aa state:D stack: 0 pid: 1506
[ 92.390448] Call Trace:
[ 92.390458] schedule+0x8c/0x1b0
[ 92.390461] wb_wait_for_completion+0x82/0xd0
[ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110
[ 92.390472] writeback_inodes_sb_nr+0x14/0x20
[ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs]
[ 92.390503] do_rename.cold+0x7f/0x187 [ubifs]
[ 92.390549] ubifs_rename+0x8b/0x180 [ubifs]
[ 92.390571] vfs_rename+0xdb2/0x1170
[ 92.390580] do_renameat2+0x554/0x770
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
A chain of commits going back to v7.0 reworked rmdir to satisfy the
controller invariant that a subsystem's ->css_offline() must not run while
tasks are still doing kernel-side work in the cgroup.
[1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
[2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup")
[3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir")
[4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition")
[5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context")
[1] moved task cset unlink from do_exit() to finish_task_switch() so a
task's cset link drops only after the task has fully stopped scheduling.
That made tasks past exit_signals() linger on cset->tasks until their final
context switch, which led to a series of problems as what userspace expected
to see after rmdir diverged from what the kernel needs to wait for. [2]-[5]
tried to bridge that divergence: [2] filtered the exiting tasks from
cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4]
fixed the wait's condition; [5] made nr_dying_subsys_* visible
synchronously.
The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the
rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g.
host PID 1 systemd reaping orphan pids that were re-parented to it during
the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those
pids to free, the pids can't free because PID 1 is the reaper and it's stuck
in rmdir, and the system A-A deadlocks. No internal lock ordering breaks
this; the wait itself is the bug.
The css killing side that drove the original reorder, however, can be made
cleanly asynchronous: ->css_offline() is already async, run from
css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to
make that chain start only after all tasks have left the cgroup. rmdir's
user-visible side then returns as soon as cgroup.procs and friends are
empty, while ->css_offline() still runs only after the cgroup is fully
drained.
Verified by the original reproducer (pidns teardown + zombie reaper, runs
under vng) which hangs vanilla and succeeds here, and by per-commit
deterministic repros for [2], [3], [4], [5] with a boot parameter that
widens the post-exit_signals() window so each state is reliably reachable.
Some stress tests on top of that.
cgroup_apply_control_disable() has the same shape of pre-existing race:
when a controller is disabled via subtree_control, kill_css() ran
synchronously while tasks past exit_signals() could still be linked to
the cgroup's csets, and ->css_offline() could fire before they drained.
This patch preserves the existing synchronous behavior at that call site
(kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch
will defer kill_css_finish() there using a per-css trigger.
This seems like the right approach and I don't see problems with it. The
changes are somewhat invasive but not excessively so, so backporting to
-stable should be okay. If something does turn out to be wrong, the fallback
is to revert the entire chain ([1]-[5]) and rework in the development branch
instead.
v2: Pin cgrp across the deferred destroy work with explicit
cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1
wasn't actually broken (ordered cgroup_offline_wq + queue_work order
in cgroup_task_dead() saved it) but the explicit ref removes the
dependency on those non-obvious invariants. Also note the
pre-existing cgroup_apply_control_disable() race in the description;
a follow-up will defer kill_css_finish() there. |