| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Goproxy before 1.9.4 contains a weak key generation vulnerability in NewCounterEncryptorRandFromKey that derives RSA and Ed25519 leaf certificate private keys from public data due to misuse of hash.Sum. Attackers with the CA certificate and one observed leaf certificate can regenerate that host's leaf private key and impersonate the host to clients trusting the proxy CA. |
| MISP contains an authorization and input-validation flaw in its event push mechanism. When a user with push permissions initiates a push of events to a remote MISP instance, the system fails to enforce two critical checks: (1) it does not verify that an event is published before including it in the push, allowing unpublished (i.e., not yet publicly shared) events to be transmitted to the remote server; and (2) it does not verify that the pushing user has read access to the event, causing events the user cannot fetch to be sent as empty event shells, thereby disclosing the existence and metadata of events the user is not authorized to view. Additionally, the remote server's reply selecting which offered events to accept is used without validating that the selected identifiers actually correspond to events in the offered set, potentially allowing the remote to reference events outside the intended scope. The vulnerability requires an authenticated user with push permissions on the source MISP instance and a configured push target. The security impact is unauthorized disclosure of confidential threat-intelligence data (unpublished events and events restricted by user permissions) to a remote MISP instance that should not receive them. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_byteorder: remove multi-register support
64bit byteorder conversion is broken when several registers need to be
converted because the source register array advances in steps for 4 bytes
instead of 8:
for (i = ...
src64 = nft_reg_load64(&src[i]);
~~~~~ u32 *src
nft_reg_store64(&dst64[i],
Remove the multi-register support, it has other issues as well:
Pablo points out that commit
caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval")
alters semantics: before the loop operated on registers, i.e.
for ( ... )
dst32[i] = htons((u16)src32[i])
.. but after the patch it will operate on bytes, which makes this
useless to convert e.g. concatenations, which store each compound
in its own register.
Multi-convert of u32 has one theoretical application:
ct mark . meta mark . tcp dport @intervalset
Because ct mark and meta mark are host byte order, use with
intervals has to convert the byteorder for ct/meta mark value
to network byte order (bigendian).
nftables emits this:
[ meta load mark => reg 1 ]
[ byteorder reg 1 = hton(reg 1, 4, 4) ]
[ ct load mark => reg 9 ]
[ byteorder reg 9 = hton(reg 9, 4, 4) ]
...
I.e. two separate calls. Theoretically it could be changed to do:
[ meta load mark => reg 1 ]
[ ct load mark => reg 9 ]
[ byteorder reg 1 = htonl(reg 1, 4, 8) ]
...
But then all it would take to change the set to
meta mark . tcp dport . ct mark
... and we'd be back to two "byteorder" calls. IOW, support to
convert a range of registers is both dysfunctional and dubious.
Simplify this: remove the feature.
Pablo Neira Ayuso points out that nftables before 1.1.0 can generate
incorrect byteorder conversions, see 9fe58952c45a,
"evaluate: skip byteorder conversion for selector smaller than 2 bytes"
in nftables.git). Affected rulesets fail to load with this change and
old userspace due to 'len != size' check. |
| OFFIS DCMTK 3.5.4 through 3.7.1 contains an integer overflow in DJCodecEncoder::encodeTrueLossless size checks that allows attackers to trigger a heap out-of-bounds read. Attackers can supply a crafted DICOM file with large Columns, Rows and SamplesPerPixel values that, when compressed with true-lossless JPEG, crashes the application. |
| OFFIS DCMTK 3.7.1 contains a heap buffer overflow vulnerability in togglePlanarConfiguration8 and togglePlanarConfiguration16 in djcodece.cc, which compute row offsets using rows instead of columns. Attackers can supply a crafted color-by-plane DICOM image with more rows than columns that is compressed with the true-lossless JPEG codec to corrupt heap memory, causing crashes and potentially code execution. |
| Tiptap @tiptap/core 3.7.0 before 3.30.5 contains a regular expression denial of service vulnerability in parseAttributes and parseShortcodeAttributes that allows attackers to exhaust CPU through quadratic backtracking. Attackers can supply Markdown with long crafted attribute strings parsed by createBlockMarkdownSpec, createAtomBlockMarkdownSpec or createInlineMarkdownSpec to stall browser pages or server processes. |
| Vulnerability in the Oracle iSetup product of Oracle E-Business Suite (component: General Ledger Update Transform, Reports). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle iSetup. Successful attacks of this vulnerability can result in takeover of Oracle iSetup. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle Hyperion Financial Close Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 6.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N). |
| Vulnerability in the Oracle Customer Care product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Customer Care. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Customer Care, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Customer Care accessible data as well as unauthorized read access to a subset of Oracle Customer Care accessible data. CVSS 3.1 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). |
| Gogs through 0.14.4 contains an authorization bypass vulnerability that allows collaborators with write access to push to protected branches by merging pull requests. Because MergePullRequest skips branch protection checks and PullRequest.Merge omits hook environment variables, attackers can merge commits into branches restricted to allowlisted users. |
| Caddy – WooCommerce Side Cart & Free Shipping Bar plugin for WordPress 3.0.0 before 3.2.1 contains a missing authorization vulnerability in the saved-items/add REST endpoint that exposes non-public product data. Authenticated attackers with Subscriber-level access can enumerate product_id values to read names, prices, images and stock status of private, draft, hidden and password-protected products. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hwdep: Serialize DSP load requests
The check of the loaded DSP indices and the call of the driver's
dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep
file descriptor can be shared among threads, or inherited across fork,
so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
observe the index as unloaded and enter the driver's callback
concurrently, even though the device itself is opened exclusively.
This breaks the assumption behind hw->dsp_loaded that a firmware index
is loaded only once. For example, snd-usb-usx2y hits
WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
allocate the US-428 sequence URBs twice.
Serialize the check, the callback invocation and the bookkeeping with a
per-hwdep mutex, so that the second request returns -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Initialize idle URBs before submitting streams
usb_stream_start() submits the first two capture and playback URBs and
only afterwards assigns sk->idle_inurb, sk->idle_outurb,
sk->completed_inurb and sk->completed_outurb to the remaining two URBs
of each direction.
A transfer can complete as soon as usb_submit_urb() has been called, so
the completion handler i_capture_start() or i_playback_start() may run
before those pointers are set. While the stream is still being
synchronized (state below usb_stream_sync1), stream_start() then calls
playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still
NULL, and the packet descriptors are written through that NULL pointer:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000018: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33
Call Trace:
<IRQ>
stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596
i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654
__usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657
usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691
tasklet_hi_action+0xa/0x20 kernel/softirq.c:994
handle_softirqs+0x16f/0x440 kernel/softirq.c:645
</IRQ>
The four URBs referenced by these pointers are allocated long before and
do not depend on any transfer state, so assign them before the submit
loop. Keeping the assignment inside the retry path also restores a
well-defined URB rotation when the start frame mismatch handling kills
and resubmits the streams. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
The driver uses hidpp->send_receive_buf to point to a stack-allocated
buffer in the synchronous command path (__do_hidpp_send_message_sync).
However, this pointer is not cleared when the function returns.
If an event is processed (e.g. by a different thread) while the
send_mutex is held by a new command, but before that command has
updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will
observe that the mutex is locked and dereference the stale pointer.
This results in an out-of-bounds access on a different thread's kernel
stack (or a NULL pointer dereference on the very first command).
Fix this by:
1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex
in the synchronous command path.
2. Moving the assignment of the local 'question' and 'answer' pointers
inside the mutex_is_locked() block in the handler, and adding
a NULL check before dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally reset MMU context when emulating INIT
Force an MMU reset when emulating an INIT even if paging was already
disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while
L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU
context.
Alternatively, the reset could be scoped strictly to paging being enabled
or L2 being active, but SMM is also encoded in the page role. Even though
it _should_ be impossible for the vCPU to be INIT'd while SMM is active,
there's zero value in not handling SMM. At that point, the only scenario
where KVM _doesn't_ need to reset the MMU context is on an INIT with the
vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those
modes is somewhat common, it's far from a hot path and re-initializing the
MMU is not expensive, especially when the role isn't changing (KVM elides
most of the re-configuration in that case).
Note, like the Fixes commit, this bug only affects nested SVM as INIT is an
unconditional intercept on VMX, i.e. it's impossible to emulate INIT while
L2 is active.
Temporarily keep the guest TLB flush when CR0.PG is being cleared even
though it is fully redundant with the flush that is emitted on all INIT
events (KVM itself only does RESET when a vCPU is being created, i.e. when
CR0.PG must be '0'). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check in build_sec_desc()
When the large dacl_offset is provided, dacl_offset + sizeof(struct
smb_acl) overflows on 32-bit builds and the check is passed,
Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This
only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So
the oob read is max 8 bytes preceding the allocated ppntsd.
unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset);
int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset;
if (!dacl_offset ||
(dacl_offset + sizeof(struct smb_acl) > ppntsd_size))
goto out;
Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check")
fixes similar checks in other functions. But leaves this one out,
because it is only valid for 32-bit builds.
Reproduced on 32-bit ARM with KASAN, by a client sending SMB2
SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the
same file:
BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105)
Read of size 2 at addr c2a273fa by task kworker/1:1/35
CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105)
build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676)
smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160)
handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401)
process_one_work from worker_thread (kernel/workqueue.c:3473)
worker_thread from kthread (kernel/kthread.c:436)
Add overflow check. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use
dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and
rebuilds it, but fbcon holds raw pointers into that list in
fb_display[i].mode and nothing un-publishes them the way
do_unregister_framebuffer() and store_modes() do with
fbcon_delete_modelist(). The function does refuse to install a new mode
while the framebuffer has users (dlfb->fb_count != 0), but only after the
list is already destroyed. Reached from the 0666 "edid" sysfs attribute,
an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with
-EINVAL and still leaves every fb_display[i].mode dangling; the next
console switch reads the freed fb_videomode in fb_videomode_to_var().
Test fb_count before touching the list. fbcon takes a reference through
fbcon_open(), so that condition covers exactly the states in which
fb_display[] points into the list, and the errno returned to userspace is
unchanged.
BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47
Workqueue: events console_callback
Call Trace:
fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
display_to_var (drivers/video/fbdev/core/fbcon.c:998)
fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182)
redraw_screen (drivers/tty/vt/vt.c:994)
complete_change_console (drivers/tty/vt/vt_ioctl.c:1141)
console_callback (drivers/tty/vt/vt.c:3358)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 28 bytes inside of
freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |