| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
[ rjw: Added one paragraph to the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix NULL pointer dereference in device cleanup
When GPU initialization fails due to an unsupported HW block
IP blocks may have a NULL version pointer. During cleanup in
amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and
amdgpu_device_set_cg_state which iterate over all IP blocks and access
adev->ip_blocks[i].version without NULL checks, leading to a kernel
NULL pointer dereference.
Add NULL checks for adev->ip_blocks[i].version in both
amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent
dereferencing NULL pointers during GPU teardown when initialization has
failed.
(cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix a few more NULL pointer dereference in device cleanup
I found a few more paths that cleanup fails due to a NULL version pointer
on unsupported hardware.
Add NULL checks as applicable.
(cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject direct access to nullable PTR_TO_BUF pointers
check_mem_access() matches PTR_TO_BUF via base_type() which strips
PTR_MAYBE_NULL, allowing direct dereference without a null check.
Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL.
On stop callbacks these are NULL, causing a kernel NULL dereference.
Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the
existing PTR_TO_BTF_ID pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
[ rjw: Subject adjustment, added an empty code line ] |
| In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Fix error handling on steps after finding a match
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing it to of_property_read_u32_array(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix NULL pointer dereference
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix null pointer dereference issue
If SMU is disabled, during RAS initialization,
there will be null pointer dereference issue here. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore: ram_core: fix incorrect success return when vmap() fails
In persistent_ram_vmap(), vmap() may return NULL on failure.
If offset is non-zero, adding offset_in_page(start) causes the function
to return a non-NULL pointer even though the mapping failed.
persistent_ram_buffer_map() therefore incorrectly returns success.
Subsequent access to prz->buffer may dereference an invalid address
and cause crashes.
Add proper NULL checking for vmap() failures. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: check return value of con2fb_acquire_newinfo()
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: add missing negotiate_features op to Hyper-V ops table
Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by
negotiating supported features") added the .negotiate_features callback
to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot
to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL
on Hyper-V VMs.
During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(),
which unconditionally dereferences hw->mac.ops.negotiate_features().
On Hyper-V this results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...]
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
[...]
Call Trace:
ixgbevf_negotiate_api+0x66/0x160 [ixgbevf]
ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf]
ixgbevf_probe+0x20f/0x4a0 [ixgbevf]
local_pci_probe+0x50/0xa0
work_for_cpu_fn+0x1a/0x30
[...]
Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and
wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP
gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af-alg - fix NULL pointer dereference in scatterwalk
The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL)
when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL
exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent
sendmsg() allocates a new SGL and chains it, but fails to clear the end
marker on the previous SGL's last data entry.
This causes the crypto scatterwalk to hit a premature end, returning NULL
on sg_next() and leading to a kernel panic during dereference.
Fix this by explicitly unmarking the end of the previous SGL when
performing sg_chain() in af_alg_alloc_tsgl(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) |