| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
When iptfs_skb_add_frags() copies frag references from the source
frag walk into a new SKB, it increments the page reference count via
__skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the
destination SKB's skb_shinfo->flags.
If the source SKB carries shared frags (e.g. from a page-pool backed
receive path), the new inner SKB will appear to ESP as having privately
owned frags. A subsequent esp_input() call for a nested transport-mode
SA then takes the no-COW fast path and decrypts in place, writing over
pages that are still referenced by the outer IPTFS SKB. This causes
kernel-visible memory corruption and can trigger a panic.
All other frag-transfer helpers in the kernel (skb_try_coalesce,
skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly
propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this
convention by setting the flag inside the loop immediately after
__skb_frag_ref() and nr_frags++, so every exit path that attaches a frag
unconditionally propagates SKBFL_SHARED_FRAG. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure
ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old
template before allocating the replacement. If the kzalloc() then fails,
it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points
at the object already queued for freeing. A later update or AP teardown
re-queues that same rcu_head; the second free is caught by KASAN when the
RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800d06f300 by task exploit/145
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-128 of size 128
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed
attribute table itself instead of calling ip_valid_fib_dump_req(). The
RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is
present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no
RTA_OIF hits a NULL dereference.
RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without
CAP_NET_ADMIN, so an unprivileged user can trigger it.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189)
Call Trace:
mpls_dump_routes (net/mpls/af_mpls.c:2236)
netlink_dump (net/netlink/af_netlink.c:2331)
__netlink_dump_start (net/netlink/af_netlink.c:2446)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7033)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1345)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
__sock_sendmsg (net/socket.c:790)
____sys_sendmsg (net/socket.c:2684)
___sys_sendmsg (net/socket.c:2738)
__sys_sendmsg (net/socket.c:2770)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Skip unset attributes, as ip_valid_fib_dump_req() does. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate RX frame length in p54_rx_eeprom_readback()
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying. |
| Clickjacking issue in the Autofill component in Firefox for Android. This vulnerability was fixed in Firefox 160. |
| ComfyUI-Easy-Use version 1.3.6 contains a path traversal vulnerability in the `save_preview()` handler for POST `/easyuse/save/{name}`. The handler checks the source directory before appending a user-supplied filename and allows the request to select the `custom_nodes` directory as a copy destination. An unauthenticated attacker who can reach the ComfyUI server can overwrite an installed custom node’s Python entry point with an uploaded file. When ComfyUI restarts and loads the modified node, the attacker’s code runs with the privileges of the ComfyUI process. |
| Out-of-bounds Write vulnerability in Broadcom AutoSys Workload Automation (AutoSys engine (AE) native clients modules) on Windows, Linux allows Overflow Buffers.This issue affects AutoSys Workload Automation: from 12.1.00.00-0305 through 24.2.00-0210. |
| A denial-of-service vulnerability exists in open5GS v2.8.0 in the PFCP transaction handling path. When the PFCP transaction or timer resource pool is exhausted, ogs_pfcp_xact_remote_create() returns NULL, but the failure is not handled properly and leads to an ogs_assert(new) failure in ogs_pfcp_xact_receive(). An attacker able to send PFCP messages to the affected SMF/UPF can exhaust transaction resources and cause the network function process to terminate with SIGABRT, resulting in service disruption and preventing further session establishment until the affected component is restarted. |
| Mitigation bypass in the Add-ons Manager component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache XML Graphics Batik.
This issue affects Apache XML Graphics Batik: through 1.19.
Users are recommended to upgrade to version 1.20, which fixes the issue. |
| unsafe deserialization in hyphenation loading vulnerability in Apache XML Graphics FOP.
This issue affects Apache XML Graphics FOP: through 2.11.
Users are recommended to upgrade to version 2.12, which fixes the issue. |
| Origin Validation Error vulnerability in Apache XML Graphics Batik: the external resource same-origin check does not compare the URL protocol
This issue affects Apache XML Graphics Batik: through 1.19.
Users are recommended to upgrade to version 1.20, which fixes the issue. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot.
The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to the execution of an error path that triggers an OOB read & write.
An error can be triggered which causes the index of the array element to be cleaned up by the error path would be outside of the array bounds. |
| Use of Hard-coded Cryptographic Key vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Session Credential Falsification through Forging.This issue affects AutoSys Workload Automation: from 12.1 through 24.2.00. |
| The file dump controller (eID=dumpFile) delivers files, file references and processed files identified by their uid, protected by a token. The token only covered the uid value, but not the type of the requested resource. A valid token issued for a file could therefore be reused to request a file reference or a processed file with the same uid. As a result, unauthenticated visitors could download files, for example from non-public storages, for which no token had been issued. |
| NVIDIA Megatron-LM contains a vulnerability where an attacker could cause deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, information disclosure, and data tampering. |
| Missing Authorization, Hidden Functionality vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Accessing Functionality Not Properly Constrained by ACLs, Exploit Non-Production Interfaces.This issue affects AutoSys Workload Automation: from 12.1.00 through 24.2.00. |
| OS Command Injection, Incomplete List of Disallowed Inputs vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows OS Command Injection, Command Delimiters.This issue affects AutoSys Workload Automation: from 12.1 through 24.2.00. |
| Allocation of Resources Without Limits or Throttling vulnerability in Plug.Parsers.MULTIPART in elixir-plug plug allows an unauthenticated remote attacker to exhaust memory via a multipart request body built from parts without headers, or from header lines without a name and a value. The parser charges the :length limit only with the name and value bytes of each part header and the bytes of each part body. The part delimiter, the header separator, and the line endings cost nothing.
In lib/plug/parsers/multipart.ex, Plug.Parsers.MULTIPART.parse_multipart_headers/5 keeps an entry for every part without a content-disposition header, together with its header list, until the whole body is read. A request made of such parts does not reach the limit at any size, and the parser process holds a multiple of the request size in memory until parsing completes. Any endpoint that uses Plug.Parsers with the :multipart parser is reachable.
This issue affects plug: from 1.13.0 before 1.20.4. |