| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: Fix clk_core_get NULL dereference
It is possible for clk_core_get to dereference a NULL in the following
sequence:
clk_core_get()
of_clk_get_hw_from_clkspec()
__of_clk_get_hw_from_provider()
__clk_get_hw()
__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.
Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.
Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.
Update the function to check for hw before dereferencing it and return NULL
if hw is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: null check for nla_nest_start
nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:
1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.
2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.
3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.
To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix potential NULL pointer dereference
Below race may cause NULL pointer dereference
P1 P2
dquot_free_inode quota_off
drop_dquot_ref
remove_dquot_ref
dquots = i_dquot(inode)
dquots = i_dquot(inode)
srcu_read_lock
dquots[cnt]) != NULL (1)
dquots[type] = NULL (2)
spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
....
If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.
So let's fix it by using a temporary pointer to avoid this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink()
The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration. |
| A race condition was found in the Linux kernel's scsi device driver in lpfc_unregister_fcf_rescan() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.
|
| NULL Pointer Dereference vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (net, bluetooth modules) allows Overflow Buffers. This vulnerability is associated with program files /net/bluetooth/rfcomm/core.C.
This issue affects Linux kernel: v2.6.12-rc2. |
| Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL
to crash leading to a potential Denial of Service attack
Impact summary: Applications loading files in the PKCS12 format from untrusted
sources might terminate abruptly.
A file in PKCS12 format can contain certificates and keys and may come from an
untrusted source. The PKCS12 specification allows certain fields to be NULL, but
OpenSSL does not correctly check for this case. This can lead to a NULL pointer
dereference that results in OpenSSL crashing. If an application processes PKCS12
files from an untrusted source using the OpenSSL APIs then that application will
be vulnerable to this issue.
OpenSSL APIs that are vulnerable to this are: PKCS12_parse(),
PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()
and PKCS12_newpass().
We have also fixed a similar issue in SMIME_write_PKCS7(). However since this
function is related to writing data we do not consider it security significant.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
block: add check that partition length needs to be aligned with block size
Before calling add partition or resize partition, there is no check
on whether the length is aligned with the logical block size.
If the logical block size of the disk is larger than 512 bytes,
then the partition size maybe not the multiple of the logical block size,
and when the last sector is read, bio_truncate() will adjust the bio size,
resulting in an IO error if the size of the read command is smaller than
the logical block size.If integrity data is supported, this will also
result in a null pointer dereference when calling bio_integrity_free. |
| A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Fix null pointer dereference in svc_rqst_free()
When alloc_pages_node() returns null in svc_rqst_alloc(), the
null rq_scratch_page pointer will be dereferenced when calling
put_page() in svc_rqst_free(). Fix it by adding a null check.
Addresses-Coverity: ("Dereference after null check") |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev
In the TX completion packet stage of TI SoCs with CPSW2G instance, which
has single external ethernet port, ndev is accessed without being
initialized if no TX packets have been processed. It results into null
pointer dereference, causing kernel to crash. Fix this by having a check
on the number of TX packets which have been processed. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_htb: make htb_deactivate() idempotent
Alan reported a NULL pointer dereference in htb_next_rb_node()
after we made htb_qlen_notify() idempotent.
It turns out in the following case it introduced some regression:
htb_dequeue_tree():
|-> fq_codel_dequeue()
|-> qdisc_tree_reduce_backlog()
|-> htb_qlen_notify()
|-> htb_deactivate()
|-> htb_next_rb_node()
|-> htb_deactivate()
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: fix efivars registration race
Since the conversion to using the TZ allocator, the efivars service is
registered before the memory pool has been allocated, something which
can lead to a NULL-pointer dereference in case of a racing EFI variable
access.
Make sure that all resources have been set up before registering the
efivars. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: address a potential NULL pointer dereference in the GRED scheduler.
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to
bail out if skb cannot be allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
When netfslib wants to copy some data that has just been read on behalf of
nfs, it creates a new write request and calls nfs_netfs_init_request() to
initialise it, but with a NULL file pointer. This causes
nfs_file_open_context() to oops - however, we don't actually need the nfs
context as we're only going to write to the cache.
Fix this by just returning if we aren't given a file pointer and emit a
warning if the request was for something other than copy-to-cache.
Further, fix nfs_netfs_free_request() so that it doesn't try to free the
context if the pointer is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci: fix NULL pointer issue on shared irq case
The tcpci_irq() may meet below NULL pointer dereference issue:
[ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[ 2.641951] status 0x1, 0x37f
[ 2.650659] Mem abort info:
[ 2.656490] ESR = 0x0000000096000004
[ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.665532] SET = 0, FnV = 0
[ 2.668579] EA = 0, S1PTW = 0
[ 2.671715] FSC = 0x04: level 0 translation fault
[ 2.676584] Data abort info:
[ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 2.695284] [0000000000000010] user address but active_mm is swapper
[ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 2.707883] Modules linked in:
[ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4
[ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT)
[ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.732989] pc : tcpci_irq+0x38/0x318
[ 2.736647] lr : _tcpci_irq+0x14/0x20
[ 2.740295] sp : ffff80008324bd30
[ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70
[ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000
[ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000
[ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001
[ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040
[ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a
[ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00
[ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031
[ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002
[ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000
[ 2.814838] Call trace:
[ 2.817273] tcpci_irq+0x38/0x318
[ 2.820583] _tcpci_irq+0x14/0x20
[ 2.823885] irq_thread_fn+0x2c/0xa8
[ 2.827456] irq_thread+0x16c/0x2f4
[ 2.830940] kthread+0x110/0x114
[ 2.834164] ret_from_fork+0x10/0x20
[ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60)
This may happen on shared irq case. Such as two Type-C ports share one
irq. After the first port finished tcpci_register_port(), it may trigger
interrupt. However, if the interrupt comes by chance the 2nd port finishes
devm_request_threaded_irq(), the 2nd port interrupt handler will run at
first. Then the above issue happens due to tcpci is still a NULL pointer
in tcpci_irq() when dereference to regmap.
devm_request_threaded_irq()
<-- port1 irq comes
disable_irq(client->irq);
tcpci_register_port()
This will restore the logic to the state before commit (77e85107a771 "usb:
typec: tcpci: support edge irq").
However, moving tcpci_register_port() earlier creates a problem when use
edge irq because tcpci_init() will be called before
devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to
the hardware to tell it to start generating interrupts but we're not ready
to deal with them yet, then the ALERT events may be missed and ALERT line
will not recover to high level forever. To avoid the issue, this will also
set ALERT_MASK register after devm_request_threaded_irq() return. |