| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| matrix-rust-sdk is an implementation of a Matrix client-server library in Rust. The `UserIdentity::is_verified()` method in the matrix-sdk-crypto crate before version 0.7.2 doesn't take into account the verification status of the user's own identity while performing the check and may as a result return a value contrary to what is implied by its name and documentation. If the method is used to decide whether to perform sensitive operations towards a user identity, a malicious homeserver could manipulate the outcome in order to make the identity appear trusted. This is not a typical usage of the method, which lowers the impact. The method itself is not used inside the `matrix-sdk-crypto` crate. The 0.7.2 release of the `matrix-sdk-crypto` crate includes a fix. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper authentication vulnerability in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings. |
| matrix-js-sdk is the Matrix Client-Server SDK for JavaScript and TypeScript. In matrix-js-sdk versions versions 9.11.0 through 34.7.0, the method `MatrixClient.sendSharedHistoryKeys` is vulnerable to interception by malicious homeservers. The method was introduced by MSC3061) and is commonly used to share historical message keys with newly invited users, granting them access to past messages in the room. However, it unconditionally sends these "shared" keys to all of the invited user's devices, regardless of whether the user's cryptographic identity is verified or whether the user's devices are signed by that identity. This allows the attacker to potentially inject its own devices to receive sensitive historical keys without proper security checks. Note that this only affects clients running the SDK with the legacy crypto stack. Clients using the new Rust cryptography stack (i.e. those that call `MatrixClient.initRustCrypto()` instead of `MatrixClient.initCrypto()`) are unaffected by this vulnerability, because `MatrixClient.sendSharedHistoryKeys()` raises an exception in such environments. The vulnerability was fixed in matrix-js-sdk 34.8.0 by removing the vulnerable functionality. As a workaround, remove use of affected functionality from clients. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| Nix is a package manager for Linux and other Unix systems. Starting in version 1.11 and prior to versions 2.18.8 and 2.24.8, `<nix/fetchurl.nix>` did not verify TLS certificates on HTTPS connections. This could lead to connection details such as full URLs or credentials leaking in case of a man-in-the-middle (MITM) attack. `<nix/fetchurl.nix>` is also known as the builtin derivation builder `builtin:fetchurl`. It's not to be confused with the evaluation-time function `builtins.fetchurl`, which was not affected by this issue. A user may be affected by the risk of leaking credentials if they have a `netrc` file for authentication, or rely on derivations with `impureEnvVars` set to use credentials from the environment. In addition, the commonplace trust-on-first-use (TOFU) technique of updating dependencies by specifying an invalid hash and obtaining it from a remote store was also vulnerable to a MITM injecting arbitrary store objects. This also applied to the impure derivations experimental feature. Note that this may also happen when using Nixpkgs fetchers to obtain new hashes when not using the fake hash method, although that mechanism is not implemented in Nix itself but rather in Nixpkgs using a fixed-output derivation. The behavior was introduced in version 1.11 to make it consistent with the Nixpkgs `pkgs.fetchurl` and to make `<nix/fetchurl.nix>` work in the derivation builder sandbox, which back then did not have access to the CA bundles by default. Nowadays, CA bundles are bind-mounted on Linux. This issue has been fixed in Nix 2.18.8 and 2.24.8. As a workaround, implement (authenticated) fetching with `pkgs.fetchurl` from Nixpkgs, using `impureEnvVars` and `curlOpts` as needed. |
| An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters. |
| TM2 Monitoring v3.04 contains an authentication bypass and plaintext credential disclosure. |
| An authentication bypass vulnerability could allow an attacker to access API functions without authentication. |
| An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL. |
| SAP NetWeaver Application Server for ABAP and ABAP Platform allows an authenticated attacker to obtain illegitimate access to the system by exploiting improper authentication checks, resulting in privilege escalation. On successful exploitation, this can result in potential security concerns. This results in a high impact on confidentiality, integrity, and availability. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| NVIDIA UFM Enterprise, UFM Appliance, and UFM CyberAI contain a vulnerability where an attacker can cause an improper authentication issue by sending a malformed request through the Ethernet management interface. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, and information disclosure. |
| PAM-PKCS#11 is a Linux-PAM login module that allows a X.509 certificate based user login. Prior to version 0.6.13, if cert_policy is set to none (the default value), then pam_pkcs11 will only check if the user is capable of logging into the token. An attacker may create a different token with the user's public data (e.g. the user's certificate) and a PIN known to the attacker. If no signature with the private key is required, then the attacker may now login as user with that created token. The default to *not* check the private key's signature has been changed with commit commi6638576892b59a99389043c90a1e7dd4d783b921, so that all versions starting with pam_pkcs11-0.6.0 should be affected. As a workaround, in `pam_pkcs11.conf`, set at least `cert_policy = signature;`. |
| A vulnerability in Okta Verify for iOS versions 9.25.1 (beta) and 9.27.0 (including beta) allows push notification responses through the iOS ContextExtension feature allowing the authentication to proceed regardless of the user’s selection. When a user long-presses the notification banner and selects an option, both options allow the authentication to succeed.
The ContextExtension feature is one of several push mechanisms available when using Okta Verify Push on iOS devices. The vulnerable flows include:
* When a user is presented with a notification on a locked screen, the user presses on the notification directly and selects their reply without unlocking the device;
* When a user is presented with a notification on the home screen and drags the notification down and selects their reply;
* When an Apple Watch is used to reply directly to a notification.
A pre-condition for this vulnerability is that the user must have enrolled in Okta Verify while the Okta customer was using Okta Classic. This applies irrespective of whether the organization has since upgraded to Okta Identity Engine. |
| The Registration Forms – User Registration Forms, Invitation-Based Registrations, Front-end User Profile, Login Form & Content Restriction Social Sites Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.7.9. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| A denial-of-service vulnerability exists in CyberPower PowerPanel Business (PPB) 4.11.0.
An unauthenticated remote attacker can restart the ppbd.exe process via the PowerPanel Business Service Watchdog service listening on TCP port 2003. The attacker can repeatedly restart ppbd.exe to render it unavailable. |
| It has been found that the Beta10 software does not provide for proper authorisation control in multiple areas of the application. This deficiency could allow a malicious actor, without authentication, to access private areas and/or areas intended for other roles. The vulnerability has been identified at least in the file or path ‘/app/tools.html’. |
| The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts. |
| The Biagiotti Membership plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.0.2. This is due to the plugin not properly verifying a user's identity prior to authenticating them. This makes it possible for unauthenticated attackers to log in as other users, such as administrators, granted they have access to an email. |
| A vulnerability in Imprivata Enterprise Access Management (formerly Imprivata OneSign) allows bypassing the login screen of the shared kiosk workstation and allows unauthorized access to the underlying Windows system through the already logged-in autologon account due to insufficient handling of keyboard shortcuts.
This issue affects Imprivata Enterprise Access Management versions 5.3 through 24.2. |