| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences(). |
| In the Linux kernel, the following vulnerability has been resolved:
igc: set tx buffer type for SMD frames
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Do not re-initialize smc hashtables
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops. |
| Krayin CRM before 2.2.7 contains a broken object level authorization vulnerability in EmailController write actions that allows scope-restricted authenticated users to manipulate other users' emails by supplying their numeric IDs. Attackers can call update, destroy, mass-update or mass-destroy endpoints to edit, re-send via is_draft=0, trash or permanently delete emails and disclose their subject, body and linked lead and person data. |
| Uncontrolled recursion in the SVG parser and renderer of the Qt SVG module (QtSvg) in Qt Group Qt allows attackers to cause a denial of service (application crash via stack exhaustion) via a crafted SVG file with deeply nested elements. |
| markdown-it is a Markdown parser. Prior to 14.3.2 and 15.0.2, when typographer: true is enabled, specially crafted Markdown can cause quadratic processing time in the smartquotes rule, potentially leading to denial of service in applications processing untrusted input. Many opening double quotes followed by unmatched closing single quotes cause repeated scans of the entire opener stack. The same issue occurs with the quote types reversed. The default configuration (typographer: false) is not affected, but this option is enabled with high probability. This issue is fixed in versions 14.3.2 and 15.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix lockdep assertion on sync reset unload event
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1.
Improper Restriction of XML External Entity Reference in the Smooks component (camel-smooks) in Apache Camel allows an attacker who supplies the XML message body to read local files or issue requests to internal network locations via an external entity declaration in that body. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. The Smooks data format (.unmarshal().smooks(...)) and the Smooks component (smooks:) parse the incoming XML body with the reader Smooks resolves by default, which is the Woodstox SAX parser. That reader resolves external general and parameter entities and loads external DTDs, and camel-smooks applied none of the parser hardening that the other Camel XML components apply. A DOCTYPE with an external subset, or an external general entity, declared in the XML document is therefore resolved and expanded while the body is unmarshalled, and the resolved content is bound into the unmarshalled result and returned on InOut routes. An external sender whose XML reaches a camel-smooks data format or endpoint could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since resolving external entities was the default behaviour. Configurations that declare their own reader - EDI, CSV, JSON, or a custom reader - do not use the XML reader and are not affected. Users are recommended to upgrade to version 4.18.5, 4.22.1 or 4.23.0, which fixes the issue.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. camel-smooks now parses the XML body with a javax.xml.parsers.DocumentBuilder that does not resolve external general or parameter entities and does not load external DTDs, and hands Smooks the resulting document, matching the secure XML processing configuration used by org.apache.camel.converter.jaxp.XmlConverter and the other Camel XML components. This hardening is applied only when the Smooks configuration parses XML with its default reader, so EDI, CSV, JSON and custom-reader configurations, and the marshalling direction, are unchanged. A new allowExternalEntities option, disabled by default, restores the previous behaviour for trusted legacy configurations that rely on external entity resolution. The camel-4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not apply camel-smooks to XML received from untrusted senders. |
| undici is an HTTP client library for Node.js. In versions 4.2.1 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, the client process crashes when a TLS 1.2 server renegotiates after the connection is established and presents a different, CA-trusted certificate whose hostname does not match the requested host. Node.js re-runs hostname verification on the renegotiated handshake and destroys the socket with a certificate-altname error, but undici's established-socket error handler asserted that this error code could never occur, so the peer-controlled error became an uncaught assertion that terminates the Node.js process, affecting both the HTTP/1.1 and HTTP/2 paths. A malicious or compromised HTTPS endpoint reached through undici or the global fetch() can crash the client with a single server-initiated renegotiation, taking down all in-flight requests and background work in the process, and exploitation needs no CA compromise because the attacker controls the endpoint and can present two ordinary valid certificates. Only TLS 1.2 is affected, since TLS 1.3 does not support renegotiation. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. As a workaround, restrict outbound connections to TLS 1.3 so renegotiation cannot occur, when the target endpoints support it. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, add_binding/3 parses the routing key as an integer weight N and computes ring positions with lists:seq(NextN0, NextN0 + N - 1). validate_binding/2 only checks N >= 1 , no upper bound. The resulting list is stored in the exchange's Khepri record, replicated cluster-wide, and reloaded on restart. A user with write permission on a consistent-hash exchange and read on a queue can create a binding whose routing key (the hash-ring weight) is an arbitrarily large integer. The broker allocates a list of that many integers via lists:seq/2 and persists it to Khepri across all cluster nodes , a single binding with weight 100000000 allocates ~800 MB on every node and survives restarts. Preconditions include rabbitmq_consistent_hash_exchange plugin enabled write permission on a consistent-hash exchange + read on a queue (standard binding perms). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, is_authorized/2 calls rabbit_mgmt_util:is_authorized/2, which checks only the management tag, instead of is_authorized_vhost/2. The /api/queues/quorum/:vhost/:queue/status handler reads the vhost from the path without checking that the user can access it. Any management-tagged user can therefore read Raft status, including leader, members, term, and commit index, for quorum queues in inaccessible vhosts, exposing cross-tenant queue names and cluster topology. The management plugin must be enabled and the attacker must have a management tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()
Drop a BUG_ON() that has been reachable since it was first added, way back
in 2009, and instead use get_unaligned() to perform potentially-unaligned
accesses.
For a given store, KVM x86's emulator tracks the entire value in the
destination operand, x86_emulate_ctxt.dst. If the destination is memory,
and the target splits multiple pages and/or is emulated MMIO, then KVM
handles each fragment independently. E.g. on a page split starting at page
offset 0xffc, KVM writes 4 bytes to the first page, then the remaining
bytes to the second page, using ctxt->dst as the source for both (with
appropriate offsets).
If the destination splits a page *and* hits emulated MMIO on the second
page, then KVM will complete the write to the first page, then emulate the
MMIO access to the second page. If there is a datamatch-enabled ioeventfd
at offset 0 of the second page, then KVM will process the remainder of the
store as a potential ioeventfd signal.
Putting it all together, if the guest emits a store that splits a page
starting at page offset N, and the second page has a datamatch-enabled
ioeventfd at offset 0, then KVM will check for datamatch using
&dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being
32-byte aligned, if N is not aligned to @len, the BUG_ON() fires.
E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8,
all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON()
fires due to @val being 4-byte aligned, but not 8-byte aligned.
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm]
Call Trace:
<TASK>
__kvm_io_bus_write+0x85/0xb0 [kvm]
kvm_io_bus_write+0x53/0x80 [kvm]
vcpu_mmio_write+0x66/0xf0 [kvm]
emulator_read_write_onepage+0x12a/0x540 [kvm]
emulator_read_write+0x109/0x2b0 [kvm]
x86_emulate_insn+0x4f8/0xfb0 [kvm]
x86_emulate_instruction+0x181/0x790 [kvm]
kvm_mmu_page_fault+0x313/0x630 [kvm]
vmx_handle_exit+0x18a/0x590 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm]
kvm_vcpu_ioctl+0x2d5/0x970 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0x890
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f19c931a9bf
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]---
In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM
x86 doesn't perform alignment checks on "normal" memory accesses at CPL0.
Sadly, C99 ruins all the fun; while the x86 architecture plays nice,
dereferencing an unaligned pointer directly is undefined behavior in C,
e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: sync RX data at the hardware packet offset
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix truncation for block sizes >= 4G
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses. |