| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb()
When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length
against frame_max but does not verify that the datagram fits within the
declared block length. Additionally, when decoding multiple NTBs from a
single socket buffer, subsequent block lengths are not checked against the
actual remaining buffer data.
With these checks missing, a malicious USB host can specify datagram
offsets and lengths that point beyond the block, or supply secondary NTB
headers declaring lengths larger than the buffer. skb_put_data() then
copies adjacent kernel memory from skb_shared_info into the network skb.
Fix this by verifying that sufficient buffer space remains for the NTB
header before parsing, handling zero-length block declarations, ensuring
that block lengths never exceed the remaining buffer space, and verifying
that each datagram payload stays strictly within the block boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get()
When the first entry in msdu_details has a zero buffer address,
the code accesses msdu_details[i - 1] with i == 0, causing a
buffer underflow.
Fix similarly to ath12k_wifi7_hal_rx_msdu_list_get() by adding
a separate check for i == 0 before the main condition to prevent
the out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read
When the firmware sends a command response with a length mismatch,
carl9170_cmd_callback() logs the mismatch and calls carl9170_restart()
but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4).
Since len comes from the firmware and can exceed ar->readlen, this
copies more data than the readbuf was allocated for.
Bound the memcpy to min(len - 4, ar->readlen) so that the response
is still completed -- avoiding repeated restarts from queued garbage --
while preventing an overread past the response buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: fix OOB read from off-by-two in TX status handler
The bounds check in carl9170_tx_process_status() uses
`i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing
2 extra iterations past valid _tx_status entries when the firmware-
controlled hdr.ext exceeds hdr.len/2. Fix by using the correct
comparison `i >= (cmd->hdr.len / 2)`. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: fix buffer overflow in rx_stream failover path
The failover continuation in carl9170_rx_stream() copies the full tlen
from the second USB transfer instead of capping at rx_failover_missing
bytes. When both transfers are near maximum size, the total exceeds the
65535-byte failover SKB, triggering skb_over_panic.
Limit the copy size to the missing byte count.
[Fix checkpatch CHECK:PARENTHESIS_ALIGNMENT] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
[added missing fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
[added fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (MichaĆ)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the end of the buffer. Also require at least 4 bytes of
payload before comparing the WPS OUI. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
mmc_ioctl_cdrom_volume() first reads the audio control mode page into a
32-byte stack buffer with cgc->buflen set to 24. If the device reports a
block descriptor, the function increases cgc->buflen to include that
descriptor and reads the page again.
For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list
by moving cgc->buffer forward by offset - 8 bytes. This drops the block
descriptor from the outgoing payload and leaves a new 8-byte mode
parameter header in front of the audio control page. However, cgc->buflen
is left unchanged.
With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8
but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low
level packet path to write 32 bytes from that adjusted pointer, reading 8
bytes past the end of the 32-byte stack buffer.
This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on
drives that return a non-zero block descriptor length, which helps explain
why it has gone unnoticed. The overread is also sent to the device as
extra MODE SELECT payload, so it may not produce an obvious local failure.
Reduce cgc->buflen by the same amount as the buffer pointer adjustment so
the MODE SELECT transfer covers only the intended parameter list. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into
the adjacent last_mic_err_time field.
rtw_parse_wpa_ie() does not prevent this: its length consistency check
compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255
when wpa_ie_len = 257, so the check passes silently.
Add explicit bounds checks for both the WPA and WPA2 paths before the
memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the
supplicant_ie buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchmaps reservation limit check
xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt
overhead to a local resblks variable, but the final UINT_MAX
check still tests req->resblks. That is the reservation value
from before the overhead was added.
The computed value is stored back in req->resblks and later passed
to xfs_trans_alloc(), whose block reservation argument is unsigned
int. Check the computed reservation so the existing limit applies
to the value that will be used. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.
That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.
Require both the start and end framing headers to be present before
subtracting them, on every loop iteration. |