| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key().
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
(fixed cur_idx when exactly one descriptor in the first fragment) |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: meson: amlogic-a4: fix deadlock issue
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
The struct pernet_operations docstring in include/net/net_namespace.h
explicitly warns against blocking RCU primitives in .exit handlers:
Exit methods using blocking RCU primitives, such as
synchronize_rcu(), should be implemented via exit_batch.
[...]
Please, avoid synchronize_rcu() at all, where it's possible.
Note that a combination of pre_exit() and exit() can
be used, since a synchronize_rcu() is guaranteed between
the calls.
xfrm_policy_fini() violates this: it calls synchronize_rcu() before
freeing the policy_bydst hash tables (so no RCU reader is mid-
traversal at free time), but runs from xfrm_net_ops.exit -- once per
namespace -- so a cleanup_net() of N namespaces pays N full RCU
grace periods serially.
Use the documented pre_exit/exit split. Move the policy flush (and
the workqueue drains it depends on) into a new .pre_exit handler;
xfrm_policy_fini() then runs in .exit and frees the hash tables
after the synchronize_rcu_expedited() that cleanup_net() guarantees
between the two phases. Providing O(1) RCU grace periods per batch
instead of O(N).
Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET)
at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread
both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct
net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed
to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and
__put_net counts were balanced, ruling out a refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsconfig: fix missing ethnl_ops_complete()
tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call
ethnl_ops_complete() before returning the error. |
| In Splunk SOAR versions below 8.7.0, a user that holds a role with the Users and Roles view permission could use the Representational State Transfer (REST) API to infer authentication token values for other users. If the inferred token grants administrative access, that user could gain administrative access to the Splunk SOAR instance.
The vulnerability is possible because the REST API accepts caller-controlled query filters on sensitive user record fields.
For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Query for Data (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/query-for-data), and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. |
| In Splunk SOAR versions below 8.7.0, an authenticated user could change the Enterprise Security edition through the Representational State Transfer (REST) API and cause Splunk SOAR to apply the license change.
The vulnerability is possible because Splunk SOAR authenticates requests to manage the Enterprise Security edition but does not authorize the caller before it applies the license change.
For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.7.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Obtain and configure a Splunk SOAR (On-premises) license (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/configure-your-companys-settings-in-splunk-soar-on-premises/obtain-and-configure-a-splunk-soar-on-premises-license), and Integration of Splunk SOAR with Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/automation-with-playbooks/integration-of-splunk-soar-with-splunk-enterprise-security) in the Splunk documentation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate VMBus packet size in receive callback
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback(). |
| Incorrect authorization in the credential handling for namespace-scoped issuers in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, from every AWS Private CA and certificate template reachable by the controller's own AWS identity or by any IAM role that identity can assume. This happens because a namespace-scoped issuer that supplies no credentials, or sets only a role, falls back to the controller's own identity.
To remediate this issue, users should first update any namespace-scoped issuers that rely on the controller's identity to use their own credentials. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1. |
| Incorrect authorization in the credential loading logic in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, signed by another namespace's AWS Private CA with that namespace's stored AWS credentials, via a namespace-scoped issuer that references a credentials Secret in that namespace.
To remediate this issue, users should first copy any credentials Secret they intend a namespace-scoped issuer to use into that issuer's namespace and update the issuer's secretRef.namespace to match. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ
handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to
calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the
serial core).
However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()
unconditionally attempt to acquire port->lock again using
uart_port_lock_irqsave(). Since spinlocks are not recursive, this
causes a deadlock on the same CPU when console flow control is engaged.
Remove the redundant lock acquisition from both rx helper functions. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| An off-by-one error in the BSON bulk document writer in the MongoDB C Driver can write one zero byte immediately past a heap allocation when a document ends at a specific buffer boundary. An actor who can influence the size of documents serialized by an embedding application can corrupt adjacent process memory or terminate the process. Reaching this issue requires the application to use the BSON bulk-writer API and produce a precise cumulative document size. |
| The MongoDB C++ Driver discards content after an embedded NUL byte in certain field and collection names accepted by the collection API. This can cause the driver and the calling application to interpret the same name differently. An authenticated actor who can influence a name passed by an affected application can cause the application to read distinct values from an unintended field or rename an unintended collection. These operations use the application's existing database credentials. |
| ** UNSUPPORTED WHEN ASSIGNED ** Missing authentication for critical function vulnerability in Apache Griffin Web Service. The REST API does not have any authentication. This includes sensitive endpoints, such as job submission when a Livy/Spark backend is configured. The API must be properly secured on the network level, and this fact was arguably not documented as clearly as it could have.
This issue affects Apache Griffin Web Service: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| Apache WSS4J remembers the UsernameToken Nonce, the Timestamp and signature of a signed message, and the ID of a SAML 2.0 "OneTimeUse" assertion, so that a captured message cannot be accepted twice. It checked whether a value had already been seen, validated the message, and only then remembered the value, as two separate steps. If several copies of the same message were processed at the same time, they could all pass the check before any of them was remembered, and all be accepted. An attacker who obtained a valid message before the recipient first processed it could send several copies at once, so that the same authenticated request was executed more than once. Where a UsernameToken is not bound to the message by a signature, the copies could carry different message bodies. The attacker needs to obtain the message while it is still in transit; a message captured after it has been accepted cannot be replayed. Affects deployments with a replay cache configured, as Apache CXF has by default. The value is now checked and remembered in a single atomic step. Custom ReplayCache implementations should override the new ReplayCache.addIfAbsent method with an operation that is atomic in their underlying store. Users are recommended to upgrade to versions 4.0.3 or 3.0.7 or 2.4.5, which fix this issue. |
| Improper authorization in Samsung Pass prior to version 5.2.12.7 allows physical attackers to access sensitive information. |
| Improper authentication in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to install arbitrary applications. |