| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of resources without limits or throttling in Apache Wicket.
org.apache.wicket.markup.html.form.upload.resource.AbstractFileUploadResource is the server side of the form-less upload offered by FileUploadToResourceField, which posts the selected files to a separately mounted resource rather than through a Form. The resource is an application-wide singleton with no component to consult, so newResourceResponse() takes the three limits that bound the upload - the total request size, the maximum size of a single part and the maximum number of parts - from the request parameters maxSize, fileMaxSize and fileCountMax, and hands them to the multipart parser as they arrive. Nothing binds those numbers to the field that is supposed to be uploading. A request naming a very large maxSize is therefore parsed with no effective ceiling on the total size, and omitting fileMaxSize and fileCountMax leaves the per-part and part-count limits unset as well. The values the application configured through FileUploadToResourceField#setMaxSize(), #setFileMaxSize() and #setFileCountMax() are consulted only when the client omits the corresponding parameter, so against a client that supplies one they have no effect at all.
Parts above the parser's in-memory threshold are spooled to the container's temporary directory, and the file parts are then copied into the folder the application's IUploadsFileManager owns, under a sub-folder the request names, where they remain. A part that is not a file is read into the heap in full while the request is parsed. One request, repeatable, can therefore consume as much disk or as much heap as the client chooses to send. The resource carries no authorization annotation and the default authorization strategy permits every resource request, so unless the application authorizes the resource itself the request needs no authentication, no session, no prior page view and no user interaction.
An application is affected where it uses FileUploadToResourceField, or mounts FileUploadResourceReference itself. This is not the ordinary upload path: the resource is a singleton that has to be created and mounted deliberately. An application that configures no upload limit at all loses nothing, because Wicket applies no total-size limit of its own by default; what the defect removes is a limit the application set. Uploads through Form with FileUploadField, and through AjaxFileDropBehavior, are not affected, because both read their limits from the component rather than from the request. The upload resource does not exist in the 8.x line.
This issue affects Apache Wicket: from 9.14.0 through 9.24.0, from 10.0.0 through 10.9.1. Users are recommended to upgrade to version 9.25.0 or 10.12.0, which fix the issue. |
| ESP-Protocols is a collection of protocol components for ESP-IDF. Prior to mDNS version 1.11.2, the `mdns` component follows DNS name-compression pointers recursively when parsing fully qualified domain names (FQDNs) in inbound mDNS packets without capping pointer-follow depth in `mdns_utils_read_fqdn()`. An unauthenticated attacker on the same link-local network can send a crafted packet to UDP port 5353 on an `ESP-IDF` device using `espressif/mdns` with mDNS enabled. Deep recursion exhausts the fixed-size stack of the mDNS FreeRTOS task, causing a controlled panic and reboot; persistent malicious traffic can cause a crash loop. No confidentiality or integrity impact has been demonstrated, and remote code execution is not claimed. This issue is fixed in mDNS version 1.11.2. |
| A vulnerability was found in Wildfly’s management interface. Due to the lack of limitation of sockets for the management interface, it may be possible to cause a denial of service hitting the nofile limit as there is no possibility to configure or set a maximum number of connections. |
| A vulnerability has been found in laspy up to 2.7.0. Affected by this issue is some unknown functionality of the file laspy/lasreader.py of the component LAS File Handler. The manipulation leads to uncontrolled memory allocation. Remote exploitation of the attack is possible. |
| A flaw was found in the Micrometer user-event metrics listener of Keycloak, a solution for integrated identity and access management. The issue occurs when the listener is configured to include the idp tag. An unauthenticated attacker can send requests to the identity broker login endpoint using arbitrary provider aliases, causing the system to create an unlimited number of metric time series. This can lead to excessive memory consumption and degrade the performance of both the server and its monitoring tools. |
| A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang. |
| The Authorino service in the Red Hat Connectivity Link is the authorization service for zero trust API security. Authorino allows the users with developer persona to add callbacks to be executed to HTTP endpoints once the authorization process is completed. It was found that an attacker with developer persona access can add a large number of those callbacks to be executed by Authorino and as the authentication policy is enforced by a single instance of the service, this leada to a Denial of Service in Authorino while processing the post-authorization callbacks. |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
| A flaw was found in `sssd-kcm`. A local user or process able to connect to the `sssd-kcm` UNIX socket can exploit this vulnerability. By sending a large request length header and then stalling the connection, an attacker can cause the system to preallocate significant memory. This leads to memory exhaustion within the `sssd-kcm` responder, resulting in a Denial of Service (DoS) for affected deployments. |
| A message body that is deeply nested and decoded by pn_message_body() could overflow the stack and cause a crash.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| A flaw was found in FreeIPA. A low-privilege authenticated user can exploit this vulnerability by submitting an oversized One-Time Password (OTP) key value. This oversized key is then decoded and re-encoded without proper size limits, consuming excessive CPU and memory resources. This can lead to a denial of service, degrading the availability of the IPA service. |
| A stack overflow vulnerability was found in gfs2-utils. The metadata walk code in metawalk.c uses alloca() with an untrusted inode height value from on-disk metadata without bounds validation, causing stack exhaustion and a denial of service when processing crafted GFS2 filesystem images. |
| A stack overflow vulnerability was found in gfs2-utils. The hash table traversal code in metawalk.c uses alloca() with an exponentially-derived size from the untrusted on-disk di_depth field without bounds validation. A crafted GFS2 filesystem image with a large di_depth value causes stack exhaustion and a denial of service when processed by fsck.gfs2, gfs2_edit, or savemeta. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Limit BO list entry count to prevent resource exhaustion
Userspace can pass an arbitrary number of BO list entries via the
bo_number field. Although the previous multiplication overflow check
prevents out-of-bounds allocation, a large number of entries could still
cause excessive memory allocation (up to potentially gigabytes) and
unnecessarily long list processing times.
Introduce a hard limit of 128k entries per BO list, which is more than
sufficient for any realistic use case (e.g., a single list containing all
buffers in a large scene). This prevents memory exhaustion attacks and
ensures predictable performance.
Return -EINVAL if the requested entry count exceeds the limit
(cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) |
| HTTP::Body versions before 1.23_01 for Perl allow memory and temporary file exhaustion via an unlimited number of form fields and multipart parts.
The urlencoded parser splits the whole body on its separators at once, creating one scalar per separator before any field is stored. This costs about 90 bytes of memory per separator byte. The multipart parser creates a temporary file for every part that carries a filename. Neither parser limits how many fields or parts a body may hold.
A remote attacker can exhaust worker memory with a body made of separators, or create thousands of temporary files with one request of small file parts. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.0, an attacker can craft a PDF containing arrays or dictionaries with many elements, causing parsing to consume large amounts of memory. This issue is fixed in version 6.21.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.0, an attacker can craft a PDF containing a content stream with many small operations, causing parsing to consume large amounts of memory. This issue is fixed in version 6.21.0. |
| Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field.
Impact:
Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large=
array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization..
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). |
| Apache Kafka's code-generated readers for flexible protocol versions read a tagged-field count declared by the sender and retain a RawTaggedField object for each unknown field. That count was bounded only by the outer request frame size (socket.request.max.bytes); it was not checked against the remaining buffer bytes or capped. Because each entry can be encoded in as little as two bytes (unknown tag 0, size 0), a modest request can declare tens of millions of tagged fields and force one object allocation per declared field. Flexible request headers (header version 2, used by flexible APIs such as ApiVersions v3) are parsed this way, so the amplification applies to the request header itself.
Impact:
The flexible request header is parsed on the network thread before authorization, request dispatch, and request-time quota accounting. A client can send a request of a few tens of megabytes whose header declares about 20 million tagged fields, forcing roughly that many RawTaggedField allocations and exhausting broker heap or inducing process-wide GC stalls, denying broker service. Because the header is parsed for pre-authentication APIs such as ApiVersions (v3), the allocation can occur before authentication; no Kafka resource ACL or quota is required.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers bounds-check the tagged-field count for flexible-versioned messages, rejecting a negative count, a count exceeding the remaining buffer bytes, or a count exceeding a fixed maximum (10,000), before any per-field allocation. |
| HTTP::Body versions before 1.24_01 for Perl allow memory exhaustion via unbounded buffering of chunked request bodies.
In chunked mode, used when no content length is given, add() holds each chunk in memory until all of it has arrived. A line that is not a chunk-size line, a size line without CRLF, or a size too large to fit an integer leaves the parser waiting forever, and every later add() grows the buffer.
A remote attacker can exhaust memory in applications that pass chunked request bodies to HTTP::Body. |