| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.3, an out-of-bounds heap read could occur in the C response parser while building an error message for a malformed response. An attacker controlled server, or possibly an accidental response, could trigger a DoS in the client. The vulnerable path was error message construction in aiohttp/_http_parser.pyx, where an llhttp error-position pointer was used to build a snippet for malformed chunked responses and malformed request or response bytes at the buffer end. This issue is fixed in version 3.14.3. |
| A use-after-free flaw was found in mutter in the Wayland color-management ICC image-description path. A local attacker who can run a malicious Wayland client can destroy a wp_image_description_v1 resource while an asynchronous ICC file read is still in progress. When the read completes, the compositor uses the freed wl_resource, writes into freed memory, and frees a pointer derived from that memory. This can crash the GNOME session and may allow arbitrary code execution within the compositor process. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: serialize DMABUF cancel against request completion
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: stop processing a read response after a receive error
cifs_read_iter_from_socket() may call cifs_reconnect() before returning an
error. The reconnect path aborts pending mids and invokes their callbacks.
The callback can then release the cifs_io_subrequest containing rdata.
cifs_readv_receive() nevertheless continues after a negative return and may
dereference rdata in cifs_readv_discard(). KASAN reports the resulting
UAF:
BUG: KASAN: slab-use-after-free in cifs_readv_receive
Read of size 4 by task cifsd
cifs_readv_receive (fs/smb/client/transport.c:1284)
cifs_demultiplex_thread (fs/smb/client/connect.c:1355)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Freed by task 148:
netfs_put_subrequest (fs/netfs/objects.c:267)
netfs_read_collection (fs/netfs/read_collect.c:460)
netfs_wait_for_in_progress (fs/netfs/misc.c:462)
Return the socket error immediately, as this path did before the iterator
conversion. This also avoids adding a negative length to total_read. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use
dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and
rebuilds it, but fbcon holds raw pointers into that list in
fb_display[i].mode and nothing un-publishes them the way
do_unregister_framebuffer() and store_modes() do with
fbcon_delete_modelist(). The function does refuse to install a new mode
while the framebuffer has users (dlfb->fb_count != 0), but only after the
list is already destroyed. Reached from the 0666 "edid" sysfs attribute,
an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with
-EINVAL and still leaves every fb_display[i].mode dangling; the next
console switch reads the freed fb_videomode in fb_videomode_to_var().
Test fb_count before touching the list. fbcon takes a reference through
fbcon_open(), so that condition covers exactly the states in which
fb_display[] points into the list, and the errno returned to userspace is
unchanged.
BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47
Workqueue: events console_callback
Call Trace:
fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
display_to_var (drivers/video/fbdev/core/fbcon.c:998)
fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182)
redraw_screen (drivers/tty/vt/vt.c:994)
complete_change_console (drivers/tty/vt/vt_ioctl.c:1141)
console_callback (drivers/tty/vt/vt.c:3358)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 28 bytes inside of
freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) |
| Use after free in Microsoft XML allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free after a failed durable reconnect
ksmbd_reopen_durable_fd() republishes a detached durable handle in the
reconnecting session's file table and takes no reference for that entry.
If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to
remove the volatile id.
Two reconnects of the same handle can both take a lookup reference before
either attaches it. If the one that reopens first then fails and drops
its references first, the other request makes the final put through
ksmbd_put_durable_fd(). That frees the handle without removing the first
session's table entry, so tearing that session down writes to freed
memory.
BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd]
Call Trace:
__close_file_table_ids+0x14d/0x740 [ksmbd]
ksmbd_destroy_file_table+0x76/0x100 [ksmbd]
ksmbd_session_destroy+0xf8/0x480 [ksmbd]
ksmbd_dispose_sessions+0x13e/0x200 [ksmbd]
ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd]
Freed by task 1030:
__ksmbd_close_fd+0x97d/0x1000 [ksmbd]
smb2_open+0x14eb/0xd9f0 [ksmbd]
Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file
lifetime") handles a final put made by the reconnecting request, but not
one made by another holder.
Remove the volatile id under the file-table lock on this error path,
before the references are dropped, as ksmbd_close_fd() does on the
request_open path just above. Removal then no longer depends on which
holder makes the final put. The stale comment in the reconnect cleanup
is updated to match. A successful reconnect is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: atomically disable rx mode work
virtio-net uses a boolean to gate rx_mode_work during device teardown.
The flag is changed under RTNL, but ndo_set_rx_mode checks it under the
address-list lock. A callback can therefore pass the check and enqueue work
after teardown has flushed it. The work is also enabled before late
probe operations that can fail, allowing probe unwind to free the netdev
with work still queued.
KASAN reports the worker using a virtqueue that probe unwind already freed:
BUG: KASAN: slab-use-after-free in virtqueue_add_split
Workqueue: events virtnet_rx_mode_work
Call Trace:
virtqueue_add_split (drivers/virtio/virtio_ring.c:706)
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839)
virtnet_send_command_reply (drivers/net/virtio_net.c:3565)
virtnet_rx_mode_work (drivers/net/virtio_net.c:3833)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405)
Freed by task 119:
kfree (mm/slub.c:6625)
vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtnet_probe (drivers/net/virtio_net.c:7129)
Use the workqueue disable mechanism to atomically reject new queue attempts
and drain running work. Keep work disabled until probe succeeds or restore
has reattached the netdev, then enable it and replay receive-mode state for
a running interface. Disable it before resource teardown in freeze and
remove. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix app-instance non-durable supersede session UAF
ksmbd_close_fd_app_instance_id() supersedes a prior open that has the
same AppInstanceId. It reaches that open's session through opinfo->sess.
This pointer is not refcounted.
Session teardown detaches durable handles before it frees the session.
It does not detach a non-durable open. That open still points at the
session through opinfo->sess after the session is freed. Another session
can supersede the open at the same time. The supersede then takes a
write lock through the stale pointer, in the freed session's file table.
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0
Call Trace:
_raw_write_lock+0x71/0xd0
ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd]
smb2_open+0x3e10/0xd910 [ksmbd]
Freed by task 212:
ksmbd_session_destroy+0x38d/0x480 [ksmbd]
Fix this by looking the session up by opinfo->session_id. The lookup
returns a reference, as smb2_break_collect_channels() does. Recheck that
opinfo->sess still points at it before using it.
Do the lookup without m_lock held. destroy_previous_session() takes
m_lock under the session table lock, and taking them in the other order
here would deadlock. |
| Gwenhywfar 5.14.2 contains a heap use-after-free vulnerability in GWEN_TLV_Buffer_To_DB() in src/parser/tlv.c, which frees a nested record's GWEN_DB node when parsing of its contents fails but continues processing and adds the freed node to the parent instead of returning. Attackers can supply a constructed BER-TLV record with unparseable contents, such as via a malicious chip card read by libchipcard, to corrupt heap memory. |
| In FRRouting, bgpd frees the sub-TLV chain of a Tunnel Encapsulation attribute (type 23) while routes stored by bgpd still point to it, if the attribute is received from a neighbor that has "soft-reconfiguration inbound" configured. A cache added to speed up attribute interning while processing the prefixes of an UPDATE checks whether an interned attribute set may be reused by comparing the parsed attributes with themselves, so the check always succeeds. Interning the parsed attributes for the Adj-RIB-In removes the Tunnel Encapsulation sub-TLVs from them, and the copy that bgpd then interns for the route reuses the cached attribute set, which still holds the sub-TLVs, without taking a reference on them. When the route is later replaced, withdrawn or cleared, for example when the session goes down, the sub-TLV chain is freed while still in use, and bgpd then reads it, decrements a reference count inside it and frees it a second time. In the reporter's build without AddressSanitizer this ended in an assertion failure in bgpd's memory accounting, aborting bgpd and dropping all BGP sessions on the router, and the neighbor can repeat it each time bgpd restarts. Because freed heap memory is written to and freed again, consequences beyond a crash cannot be ruled out. An established BGP session is required, and the attribute does not need to be malformed. bgpd processes attribute 23 from every neighbor, including eBGP neighbors, unless it is explicitly discarded, although RFC 9012 requires it to be filtered on eBGP sessions by default. Neighbors without "soft-reconfiguration inbound" are not affected. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Samsung GPU driver, improper reference count handling during command submission can lead to memory corruption. |
| In the Samsung Exynos GPU driver, improper synchronization during buffer object creation and closing can lead to memory corruption |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in HomeView Software Version 27.2, iOS 18.7.12 and iPadOS 18.7.12, iOS 26.7.3 and iPadOS 26.7.3, iOS 27.2.1 and iPadOS 27.2.1, macOS Golden Gate 27.2.1, macOS Sequoia 15.8.3, macOS Tahoe 26.7.3, tvOS 27.2.1, visionOS 27.2.1, watchOS 26.6.1, watchOS 27.2.1. An attacker in Bluetooth range may be able to corrupt process memory. |
| FreeRDP before 3.33.0 contains a heap use-after-free vulnerability in update_gdi_patblt(), update_gdi_polygon_cb() and update_gdi_mem3blt() that retain stale brush cache pointers. A malicious RDP server can resend CACHE_BRUSH to the same slot then send PATBLT, causing clients to read freed heap memory, disclosing data or crashing. |
| A use-after-free vulnerability exists in Samsung Escargot 5.0.2 in the buffer-access paths for ReloadableString and CompressibleString. Internal raw character accessors and the public StringRef::stringBufferAccessData() API did not preserve the lifetime of the underlying buffer while it remained in use. As a result, idle unloading or garbage-collection compression could release the buffer and leave a stale pointer. Subsequent access may cause the process to crash or, under allocation-dependent conditions, expose limited contents of another heap allocation. The issue was addressed by adding buffer-lifetime reference tracking and removing unsafe raw character accessors. |
| A use-after-free flaw was found in GStreamer core buffer value deserialization. When serialized buffer text contains an invalid character, an error path frees a mapped buffer before unmapping it. Applications that parse untrusted caps or structure data can reach a freed-buffer read and may crash. A network-facing GStreamer Data Protocol receiver can process such caps data without user interaction; further impact has not been established. |
| Use after free for some Intel(R) QuickAssist Technology Driver for Windows within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |