| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()
In id_mode_to_cifs_acl(), while the chown branch reserves
sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_acl) and the worst-case ACE space after
commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group
rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or
5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace)
on posix).
However, the chmod branch also invokes build_sec_desc() ->
copy_sec_desc(), which unconditionally writes the Owner SID at
pnntsd + sidsoffset and the Group SID at
pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total),
and set_chmod_dacl() always writes a struct smb_acl header (8 bytes)
even when the source descriptor has dacloffset == 0. When a security
descriptor has compact or overlapping Owner/Group SIDs (or
dacloffset == 0), calling chmod() under-allocates pnntsd and writes past
the end of the slab buffer.
Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_ntsd) on the posix path) in the chmod branch of
id_mode_to_cifs_acl(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: reject short connection requests
nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a
struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The
iWARP path allocates exactly the peer-provided length, so a six-byte MPA
request reaches the parser and the hsqsize load reads two bytes past the
allocation.
Require the complete request structure before reading any of its fields.
The decoded KASAN report is:
BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41
Workqueue: iw_cm_wq cm_work_handler
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
cma_cm_event_handler (drivers/infiniband/core/cma.c:2181)
iw_conn_req_handler (drivers/infiniband/core/cma.c:2640)
cm_work_handler
(drivers/infiniband/core/cm.c:2502
drivers/infiniband/core/cm.c:3858)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Allocated by task 12:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_node_track_caller_noprof
(mm/slub.c:5414 mm/slub.c:5545)
kmemdup_noprof (mm/util.c:138)
cm_event_handler
(drivers/infiniband/core/iwcm.c:194
drivers/infiniband/core/iwcm.c:1076)
siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408)
siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750)
siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086)
The buggy address is located 0 bytes to the right of
allocated 6-byte region [ff1100010459d360, ff1100010459d366) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway. |
| A flaw was found in libslirp in icmp_forward_error(). When building an ICMP error response, the length of the quoted original IPv4 packet was taken from the IP header without clamping it to the actual buffer length. A truncated or malformed packet could cause an out-of-bounds heap read, leaking host memory into the ICMP error packet returned to a guest or container. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Zero out sring pointers on unmap
If xenvif_map_frontend_data_rings() fails when a ring is already mapped,
it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the
ring pointers unchanged. xenvif_connect_data()'s cleanup path calls
xenvif_disconnect_queue() which in turn calls
xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the
pointers a second time.
Zero out the ring pointers after they are unmapped to avoid this issue.
This is XSA-532 |
| SAP NetWeaver Application Server ABAP and SAP Web Dispatcher do not sufficiently validate certain header values processed during inbound request handling. An unauthenticated attacker could send a specially crafted request to cause the affected process to become unavailable.This results in a high impact on availability. There is no impact on confidentiality and integrity. |
| Integer Overflow Vulnerability in Hitachi Dynamic Link Manager for VMware.
This issue affects Hitachi Dynamic Link Manager for VMware: from 8.7.3-00 before 9.0.4-01. |
| Stack-based Buffer Overflow Vulnerability in Hitachi Dynamic Link Manager for VMware.
This issue affects Hitachi Dynamic Link Manager for VMware: from 8.7.3-00 before 9.0.4-01. |
| Integer Overflow Vulnerability in Hitachi Dynamic Link Manager for AIX (for the Japanese market).
This issue affects Hitachi Dynamic Link Manager for AIX: before 9.0.4-01. |
| Heap-based Buffer Overflow Vulnerability in Hitachi Dynamic Link Manager for Linux.
This issue affects Hitachi Dynamic Link Manager for Linux: from 7.5.0-00 before 9.0.5-00. |
| Out-of-bounds Read and Write Vulnerability in Hitachi Dynamic Link Manager for Linux.
This issue affects Hitachi Dynamic Link Manager for Linux: from 7.5.0-00 before 9.0.5-00. |
| Gwenhywfar 4.99.8beta before 5.14.2 contains a stack-based buffer overflow in GWEN_TLV_Buffer_To_DB() in src/parser/tlv.c when decoding BER-TLV tags into a fixed 128-byte buffer. Attackers can supply a record with about 127 or more tag continuation bytes or a truncated multi-byte tag, such as via a malicious chip card's EF_SSD file read by libchipcard's ZKA driver, to crash the application. |
| pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback connections. Because PostgreSQL evaluates the file from top to bottom, those entries also preempted operator-supplied rules in the pg_hba_conf field. Under the systemd orchestrator, any unprivileged operating-system account on a database host could authenticate as any PostgreSQL role, including the superuser, without credentials and obtain full control of the host's databases. Under Docker Swarm, reaching the container-local socket or loopback interface required code execution inside the database container. Publishing the PostgreSQL port to the host did not expose these trust rules because host connections did not appear to originate from 127.0.0.1 or ::1. This issue is fixed in version 0.11.0. |
| The Auth0 ASP.NET Core Authentication SDK incorrectly determines a session's OIDC Back-Channel Logout status, which may result in a logged-out session being accepted for access to protected endpoints. |
| node-fontnik is a library that delivers a range of glyphs rendered as SDFs (signed distance fields) in a protocol buffer. Prior to version 0.7.7, a crafted font could trigger a heap out-of-bounds write in RenderSDF (include/mapbox/glyph_foundry_impl.hpp). RenderSDF computed the SDF bitmap allocation size as buffered_width * buffered_height in 32-bit unsigned int. Glyph dimensions are derived from the uploaded font's outline bounding box with no upper bound, so a glyph large enough to make that product exceed 2³² wrapped to a small value. The buffer was then under-allocated while the render loop still wrote one byte per pixel, corrupting the heap (CWE-190 → CWE-787) and crashing the process. A 680-byte font is enough to drive FreeType to a 65536×65536 buffered glyph, wrapping the size to 0. This issue has been patched in version 0.7.7. |
| Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Samsung Open Source mTower allows Overflow Buffers. |
| OpsTree REMS through 1.0.0 contains a prompt injection vulnerability that allows authenticated users to disclose the hidden system prompt by submitting crafted chat input to POST /api/v1/rca/chat. Attackers can instruct the assistant to ignore its rules and reveal internal orchestration instructions, aiding the crafting of further prompt injection attacks. |
| iopress is a native HTTP server for Node.js with platform-specific async I/O. Prior to version 1.0.5, the chunked-transfer-encoding HTTP request parser in @iopress/core reads past the end of the input buffer when a request declares a chunk size larger than the body actually received. This results in a heap-buffer-over-read. This issue has been patched in version 1.0.5. |
| Incorrect default permissions and Product released in Non-Release configuration vulnerability in OpenText Identity Console on Windows, Linux, and 64 bit allows Retrieve Embedded Sensitive Data.
This issue affects Identity Console: from 1.8 through 25.2. |